Filter interviews by
The development length for M25 concrete and Fe 500 steel is determined based on various factors.
Development length is the length of reinforcement required to transfer the stress between the concrete and steel.
It depends on the bond strength between concrete and steel, concrete cover, and the diameter of the steel bar.
For M25 concrete and Fe 500 steel, the development length can be calculated using empirical formulas or...
The minimum thickness of slab depends on various factors such as load, span, and type of slab.
The minimum thickness of slab is generally 4 inches for residential buildings.
For commercial buildings, the minimum thickness of slab is 6 inches.
The thickness of slab also depends on the type of slab such as one-way or two-way slab.
The thickness of slab also depends on the span of the slab and the load it will bear.
The minimu...
The slab shuttering removal time depends on various factors such as concrete strength, weather conditions, and type of formwork used.
The removal time can range from 3 days to 21 days depending on the above factors.
For normal concrete with temperature above 20°C, the removal time is usually 7 days.
For concrete with high early strength, the removal time can be reduced to 3 days.
In cold weather conditions, the removal tim...
Mortars used for tiles bed are cement-based and are used to fix tiles to the substrate.
Cement-based mortars are commonly used for tiles bed
They are used to fix tiles to the substrate
The mortar should be mixed with water to form a paste
The paste is then applied to the substrate using a notched trowel
Tiles are then placed onto the mortar and pressed firmly into place
The mortar should be allowed to dry and set before grou
posted on 10 Sep 2015
I applied via PLACEMENT
posted on 10 Sep 2017
I was interviewed before Sep 2016.
posted on 11 Feb 2021
I applied via Campus Placement and was interviewed before Feb 2020. There were 5 interview rounds.
Cube mould size is a standard size used for testing the compressive strength of concrete.
Cube moulds are typically made of steel or cast iron.
The standard size for cube moulds is 150mm x 150mm x 150mm.
Other sizes such as 100mm x 100mm x 100mm and 200mm x 200mm x 200mm are also used.
The moulds are filled with concrete and left to cure before being tested for compressive strength.
Cube moulds are used to ensure that the c...
To calculate the weight of an 8mm diameter steel rod, use the formula: weight = volume x density.
Calculate the volume of the rod using the formula: volume = π x (diameter/2)^2 x length
Find the density of steel, which is typically around 7850 kg/m^3
Multiply the volume by the density to get the weight of the rod
posted on 7 Sep 2022
I applied via Recruitment Consulltant and was interviewed before Sep 2021. There were 2 interview rounds.
posted on 12 May 2018
posted on 25 Jun 2021
I applied via Company Website and was interviewed before Jun 2020. There were 3 interview rounds.
posted on 14 Jul 2021
posted on 1 Oct 2023
I applied via Referral and was interviewed in Apr 2023. There were 3 interview rounds.
posted on 11 Jun 2022
I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.
Mathematics, English, Reasoning
An antenna is a device that converts electrical signals into electromagnetic waves and vice versa. Satcom is short for satellite communication.
Antennas are used for transmitting and receiving signals in various applications such as radio, television, and wireless communication.
Satcom refers to the use of satellites for communication purposes, including television broadcasting, internet access, and military communicatio...
Clean India
Corruption
based on 6 reviews
Rating in categories
Assistant Manager
24
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Accounts Executive
16
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Site Engineer
15
salaries
| ₹0 L/yr - ₹0 L/yr |
Civil Foreman
15
salaries
| ₹0 L/yr - ₹0 L/yr |
DLF
Godrej Properties
Sobha
Prestige Group