Upload Button Icon Add office photos

Filter interviews by

Clear (1)

LMW Textile Machinery Division Design Engineer Interview Questions, Process, and Tips

Updated 20 Feb 2024

LMW Textile Machinery Division Design Engineer Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Feb 2023. There were 2 interview rounds.

Round 1 - One-on-one 

(3 Questions)

  • Q1. Stress Strain diagram
  • Ans. 

    Stress Strain diagram shows the relationship between stress and strain in a material.

    • Shows how a material deforms under stress

    • Helps determine material properties like yield strength and modulus of elasticity

    • Can be used to compare different materials' behavior under load

  • Answered by AI
  • Q2. Pressure vs load
  • Ans. 

    Pressure is force applied over an area, while load is the weight supported by a structure or material.

    • Pressure is force applied perpendicular to a surface, measured in units like psi or Pa.

    • Load is the weight supported by a structure or material, measured in units like pounds or newtons.

    • Pressure can cause deformation or stress in a material, while load determines the strength needed to support it.

    • Examples: A hydraulic p...

  • Answered by AI
  • Q3. What is Bearing
  • Ans. 

    A bearing is a machine element that allows one part to bear another part's load while reducing friction between the two parts.

    • Bearing helps in reducing friction between moving parts

    • They support radial and axial loads

    • Common types include ball bearings, roller bearings, and plain bearings

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. Beam and its types
  • Ans. 

    A beam is a structural element that carries load primarily in bending. Types include cantilever, simply supported, fixed, and continuous beams.

    • Beams are horizontal or inclined structural members that support loads applied perpendicular to their longitudinal axis.

    • Types of beams include cantilever beams (supported at one end), simply supported beams (supported at both ends), fixed beams (supported at both ends with addit...

  • Answered by AI
  • Q2. Deflection calculation

Interview Preparation Tips

Interview preparation tips for other job seekers - Should be strong in basics

Interview questions from similar companies

I was interviewed before Aug 2021.

Round 1 - Aptitude Test 

General Aptitude - Generic questions

Round 2 - Technical 

(1 Question)

  • Q1. Question related to final year projects, Other questions surrounding that projects, etc
Round 3 - HR 

(1 Question)

  • Q1. Questions regarding availability, flexibility etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - Be yourself and be confident in your skills and always be honest.

I applied via Company Website and was interviewed before May 2021. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Regarding about Assembly knowledge
  • Q2. Personal round from HR

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be updated and we'll known from technical.

I applied via Naukri.com and was interviewed in May 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - One-on-one 

(1 Question)

  • Q1. Transmission system and types of drives
  • Ans. 

    Transmission system is responsible for transmitting power from the engine to the wheels. Types of drives include manual, automatic, and CVT.

    • Transmission system transfers power from engine to wheels

    • Manual transmission requires driver to shift gears

    • Automatic transmission shifts gears automatically

    • CVT (Continuously Variable Transmission) uses a belt and pulley system to provide seamless gear changes

    • Other types of drives i...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Gears
Belts - flat belt, timing belt.
Chains
Interview experience
4
Good
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in

Round 1 - Technical 

(1 Question)

  • Q1. Engineering Basics
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions related to the previous experience
Round 1 - Technical 

(1 Question)

  • Q1. Basic electric questions and PLC programming
Round 2 - Technical 

(1 Question)

  • Q1. Based on your project

Interview Preparation Tips

Interview preparation tips for other job seekers - More question will be on your project for experience people

Senior Engineer Interview Questions & Answers

Rieter user image RAJA IRUTHAYARAJ

posted on 8 Dec 2023

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - Assignment 

Best assignment that you had accomplished in your career

Round 2 - HR 

(4 Questions)

  • Q1. Salary expectations?
  • Q2. Rs 12 Lakhs per annum if I am not provided factory quarter in Pune
  • Q3. When can you join? IMMEDIATELY
  • Q4. Rs 12 Lakhs per annum in Pune Rs 8 Lakhs per annum in Cbe in technology dept
Round 3 - One-on-one 

(1 Question)

  • Q1. Where will you be after 10 years?

Interview Preparation Tips

Interview preparation tips for other job seekers - Nothing to advice
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Indeed and was interviewed before Feb 2023. There was 1 interview round.

Round 1 - Face to face 

(3 Questions)

  • Q1. Tell me about your self
  • Ans. I tell them about my self as I was .be honest with interviewer
  • Answered Anonymously
  • Q2. Family background?
  • Q3. Tell them about my family

Interview Preparation Tips

Interview preparation tips for other job seekers - Normal rat job not so surprising work load hear
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(2 Questions)

  • Q1. Overall need check What's your career expectations
  • Q2. Are you okay for traveling?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be honest
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
4-6 weeks
Result
-

I applied via Recruitment Consulltant and was interviewed in Jul 2024. There were 4 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Online examination with 60 Technical questions in 60 minutes
Round 2 - Aptitude Test 

Online examination of 30 questions in 30 minutes

Round 3 - Case Study 

Online examination of 30 questions in 30 minutes

Round 4 - HR 

(1 Question)

  • Q1. Personal details, background, work experience, Strengths & weakness
Contribute & help others!
anonymous
You can choose to be anonymous

LMW Textile Machinery Division Interview FAQs

How many rounds are there in LMW Textile Machinery Division Design Engineer interview?
LMW Textile Machinery Division interview process usually has 2 rounds. The most common rounds in the LMW Textile Machinery Division interview process are One-on-one Round and Technical.
What are the top questions asked in LMW Textile Machinery Division Design Engineer interview?

Some of the top questions asked at the LMW Textile Machinery Division Design Engineer interview -

  1. What is Bear...read more
  2. Stress Strain diag...read more
  3. Pressure vs l...read more

Recently Viewed

PHOTOS

InsuranceDekho

3 office photos

LIST OF COMPANIES

Credit Bajaar

Overview

INTERVIEWS

LMW Textile Machinery Division

No Interviews

LIST OF COMPANIES

AVASO Technology Solutions

Locations

SALARIES

AVASO Technology Solutions

INTERVIEWS

LMW Textile Machinery Division

5.6k top interview questions

SALARIES

Vodafone Idea

INTERVIEWS

Amazon

No Interviews

SALARIES

Vodafone Idea

SALARIES

Vodafone Idea

Tell us how to improve this page.

LMW Textile Machinery Division Design Engineer Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Fast track your campus placements

View all
LMW Textile Machinery Division Design Engineer Salary
based on 4 salaries
₹5.1 L/yr - ₹5.8 L/yr
11% more than the average Design Engineer Salary in India
View more details

LMW Textile Machinery Division Design Engineer Reviews and Ratings

based on 1 review

5.0/5

Rating in categories

4.0

Skill development

5.0

Work-life balance

1.0

Salary

5.0

Job security

2.0

Company culture

1.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Senior Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

QA Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Design Engineer
4 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
3 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare LMW Textile Machinery Division with

Rieter

3.7
Compare

Truetzschler India

4.1
Compare

Voltas

4.0
Compare

Lakshmi Machine Works

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview