Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Larsen & Toubro Limited Team. If you also belong to the team, you can get access from here

Larsen & Toubro Limited Verified Tick

Compare button icon Compare button icon Compare
4.0

based on 17.8k Reviews

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Larsen & Toubro Limited Environmental Officer Interview Questions and Answers

Updated 27 Sep 2021

Larsen & Toubro Limited Environmental Officer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Related with Environment Safeguard

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident and be Strong

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Sep 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(20 Questions)

  • Q1. 1. What are the Fire NOC conditions? 14. 15. 16. 17. 18. 19.
  • Ans. 

    Fire NOC conditions are the set of requirements that a building or establishment must meet to obtain a No Objection Certificate for fire safety.

    • Fire NOC conditions include having adequate fire exits, fire alarms, fire extinguishers, and sprinkler systems.

    • The building must also have clear access for fire trucks and emergency personnel.

    • Regular fire drills and safety training for employees are also required.

    • Examples of Fi...

  • Answered by AI
  • Q2. 2. Fire NOC & CTO compliance done by whome?
  • Ans. 

    Fire NOC & CTO compliance is done by the local fire department and pollution control board respectively.

    • Fire NOC compliance is done by the local fire department.

    • CTO compliance is done by the pollution control board.

    • Both compliances are mandatory for any organization to operate.

    • The process involves inspection of the premises and ensuring all safety measures are in place.

    • Non-compliance can result in penalties and even cl

  • Answered by AI
  • Q3. 3. What is the Fire water tank capacity?
  • Ans. 

    The fire water tank capacity is 50,000 gallons.

    • The fire water tank is used for emergency firefighting purposes.

    • It is important to regularly check and maintain the tank to ensure it is always ready for use.

    • The capacity of the tank may vary depending on the size and needs of the facility.

    • For example, a smaller facility may have a fire water tank with a capacity of 10,000 gallons.

    • On the other hand, a larger facility may h...

  • Answered by AI
  • Q4. 4. What Type of fire pump?
  • Ans. 

    The type of fire pump depends on the specific needs of the facility and the hazards present.

    • Factors to consider when selecting a fire pump include the size of the facility, the type of hazards present, and the water supply available.

    • Common types of fire pumps include electric motor-driven pumps, diesel engine-driven pumps, and steam turbine-driven pumps.

    • The fire pump should be designed to meet the specific requirements...

  • Answered by AI
  • Q5. 5. What type Fire extinguisher requirement as per factory act? Light hazard, Ordinary hazard, High hazard
  • Ans. 

    Fire extinguisher requirements vary based on the hazard level of the workplace.

    • Light hazard workplaces require water, foam, or dry powder extinguishers.

    • Ordinary hazard workplaces require water, foam, dry powder, or carbon dioxide extinguishers.

    • High hazard workplaces require foam, dry powder, carbon dioxide, or specialized extinguishers such as halon or clean agent.

    • The specific requirements may vary by country and indus...

  • Answered by AI
  • Q6. 6. At what height fire extinguisher to be placed from the floor?
  • Ans. 

    Fire extinguishers should be placed at a height of 3.5 to 5 feet from the floor.

    • The ideal height for fire extinguishers is between 3.5 to 5 feet from the floor.

    • This ensures that the extinguisher is easily accessible in case of a fire.

    • The height should be adjusted based on the height of the ceiling and the size of the room.

    • Extinguishers should be mounted on brackets or in cabinets to prevent them from falling.

    • It is impo...

  • Answered by AI
  • Q7. 7. What are the Reason behind changes the job?
  • Ans. 

    Changes in job can occur due to various reasons such as organizational restructuring, technological advancements, or personal growth.

    • Organizational restructuring or downsizing

    • Technological advancements leading to automation or new job roles

    • Personal growth and desire for new challenges

    • Changes in industry or market demand

    • Mergers and acquisitions

    • Geographical relocation

    • Health or family reasons

    • Career advancement opportuniti

  • Answered by AI
  • Q8. 8. Construction what kind of hazard and risk available?
  • Ans. 

    Construction hazards include falls, electrical hazards, noise, and exposure to hazardous materials.

    • Falls from heights or on slippery surfaces

    • Electrical hazards from exposed wires or faulty equipment

    • Noise exposure from heavy machinery and equipment

    • Exposure to hazardous materials such as asbestos, lead, and silica dust

    • Risk of fires and explosions from flammable materials and chemicals

    • Physical strain and injuries from lif

  • Answered by AI
  • Q9. 9. At height work what should be the minimum height for safety harness anchor point?
  • Ans. 

    The minimum height for safety harness anchor point should be 6 feet.

    • The anchor point should be at a height of at least 6 feet above the ground.

    • This is to ensure that the worker does not hit the ground in case of a fall.

    • The anchor point should be strong enough to support the weight of the worker and the equipment.

    • The harness should be properly fitted and adjusted to ensure maximum safety.

    • Regular inspection and maintenan...

  • Answered by AI
  • Q10. 10. What are the height work equipment used for work at height?
  • Ans. 

    Height work equipment includes ladders, scaffolds, aerial lifts, and fall protection systems.

    • Ladders: used for low height work

    • Scaffolds: used for medium height work

    • Aerial lifts: used for high height work

    • Fall protection systems: used to prevent falls from height

    • Examples: extension ladders, rolling scaffolds, scissor lifts, harnesses, guardrails

  • Answered by AI
  • Q11. 11. What are the lifting safety requirements?
  • Ans. 

    Lifting safety requirements include proper technique, use of equipment, and weight limits.

    • Use proper lifting technique, such as bending at the knees and keeping the back straight

    • Use equipment such as lifting belts, back braces, and lifting straps when necessary

    • Know weight limits and do not exceed them

    • Ensure clear pathways and good visibility when moving heavy objects

    • Train employees on proper lifting techniques and safe...

  • Answered by AI
  • Q12. 12. Warehouse what are the material lifting equipment used?
  • Ans. 

    Various material lifting equipment are used in warehouses depending on the type of material and its weight.

    • Forklifts are commonly used for heavy loads

    • Pallet jacks are used for moving pallets

    • Hand trucks are used for smaller loads

    • Conveyor belts are used for continuous movement of materials

    • Hoists and cranes are used for lifting heavy equipment

    • Scissor lifts are used for lifting workers to higher levels

    • Loading dock levelers...

  • Answered by AI
  • Q13. 13. What are the legal compliance required for mechanical materials lifting equipment?
  • Ans. 

    Legal compliance for mechanical materials lifting equipment include OSHA regulations, ANSI standards, and manufacturer guidelines.

    • OSHA regulations require regular inspections and maintenance of lifting equipment.

    • ANSI standards provide guidelines for the design, construction, and testing of lifting equipment.

    • Manufacturer guidelines must be followed for proper use and maintenance of specific equipment.

    • Compliance with the...

  • Answered by AI
  • Q14. 14. What is load center for lifting Operation?
  • Ans. 

    Load center is the point where the weight of the load is concentrated during lifting operation.

    • It is the point where the weight of the load is concentrated

    • It is important to know the load center to ensure safe lifting operation

    • The load center varies depending on the shape and size of the load

    • Incorrect load center calculation can lead to accidents and injuries

  • Answered by AI
  • Q15. 15. If radius increase then load lifting capacity increase or decrease?
  • Ans. 

    Load lifting capacity decreases as radius increases.

    • The load lifting capacity is inversely proportional to the radius.

    • As the radius increases, the load lifting capacity decreases.

    • This is because the load moment arm increases with radius, making it harder to lift the load.

    • For example, a crane with a longer boom has a lower load lifting capacity than a crane with a shorter boom.

  • Answered by AI
  • Q16. 16. Electrical maintenance work safety precautions?
  • Ans. 

    Electrical maintenance work safety precautions include proper training, use of personal protective equipment, and following lockout/tagout procedures.

    • Ensure all electrical equipment is de-energized before maintenance work begins

    • Use appropriate personal protective equipment such as gloves, safety glasses, and insulated tools

    • Follow lockout/tagout procedures to prevent accidental energization of equipment

    • Provide proper tr...

  • Answered by AI
  • Q17. 17. What is the checking mechanism for presence of residual leakage current?
  • Ans. 

    The checking mechanism for residual leakage current involves using a ground fault circuit interrupter (GFCI) or a leakage current tester.

    • A GFCI can detect and interrupt leakage current by comparing the amount of current flowing into and out of a circuit.

    • A leakage current tester measures the amount of current flowing through a circuit and compares it to a predetermined threshold.

    • Regular testing and maintenance of electr...

  • Answered by AI
  • Q18. 18. What do you mean meggar process?
  • Ans. 

    Meggar process is a method used to measure the insulation resistance of electrical equipment.

    • Meggar process involves applying a high voltage DC current to the equipment and measuring the resulting insulation resistance.

    • It is commonly used in the maintenance and testing of electrical equipment to ensure safety and reliability.

    • The results of the meggar process can indicate if there are any faults or defects in the insula...

  • Answered by AI
  • Q19. 19. After LOTO or isolation of electrical energy , what is the mechanism to check whether electrical energy isolation done or not?
  • Ans. 

    After LOTO or isolation of electrical energy, a mechanism must be used to check whether electrical energy isolation has been done or not.

    • Visual inspection of the equipment to ensure that it is not energized

    • Use of a voltage tester to check for the presence of electrical energy

    • Verification of the LOTO or isolation tag

    • Testing the equipment to ensure that it is not operational

    • Communication with other workers to ensure that...

  • Answered by AI
  • Q20. 20. What will be the sureity that you will stay in the organisation for longer periods of time.
  • Ans. 

    I am committed to the organization's mission and values and see a long-term future here.

    • I have researched the company and believe in its goals and values

    • I am looking for stability and growth opportunities

    • I am willing to invest time and effort in developing my skills and contributing to the company's success

    • I am open to discussing career advancement and growth opportunities with my manager

  • Answered by AI

Interview Preparation Tips

Topics to prepare for Alstom Transportation Environmental Health and Safety Lead interview:
  • Factory Act
  • Fire NOC
  • Work at height
  • Lifeting safety
  • Lifeting tools and tackle
  • Electrical safety
Interview preparation tips for other job seekers - Interviewer ask questions based on present and past job profile.

Tell us how to improve this page.

People are getting interviews through

based on 1 Larsen & Toubro Limited interview
Job Portal
100%
Low Confidence
?
Low Confidence means the data is based on a small number of responses received from the candidates.

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.1k Interviews
Tata Projects Interview Questions
4.3
 • 397 Interviews
Tata Group Interview Questions
4.2
 • 357 Interviews
Tata Technologies Interview Questions
3.7
 • 246 Interviews
TCE Interview Questions
3.8
 • 237 Interviews
View all
Assistant Manager
3.8k salaries
unlock blur

₹6 L/yr - ₹17.5 L/yr

Senior Engineer
3.4k salaries
unlock blur

₹4.5 L/yr - ₹15.1 L/yr

Engineer
1.2k salaries
unlock blur

₹1.6 L/yr - ₹9.1 L/yr

Manager
1.1k salaries
unlock blur

₹9 L/yr - ₹29 L/yr

Assistant Construction Manager
1k salaries
unlock blur

₹5.4 L/yr - ₹21 L/yr

Explore more salaries
Compare Larsen & Toubro Limited with

Tata Group

4.2
Compare

Reliance Industries

4.0
Compare

Adani Group

3.9
Compare

Mahindra & Mahindra

4.1
Compare

Calculate your in-hand salary

Confused about how your in-hand salary is calculated? Enter your annual salary (CTC) and get your in-hand salary
Did you find this page helpful?
Yes No
write
Share an Interview