Filter interviews by
I applied via Campus Placement and was interviewed before Jan 2022. There were 3 interview rounds.
You can pass if you prepare for ssc exam, but question level a bit tougher
2 stroke engines have simpler design but less efficient than 4 stroke engines. Pistons are made of aluminum alloy for light weight.
2 stroke engines have only two strokes (intake/compression and power/exhaust) while 4 stroke engines have four strokes (intake, compression, power, and exhaust).
2 stroke engines have simpler design and are lighter but less efficient than 4 stroke engines.
Pistons are made of aluminum alloy f...
The question is about types of beams and advantages, and the height of a cycle tire.
Types of beams include cantilever, simply supported, fixed, and continuous beams.
Advantages of beams include their ability to support weight and distribute loads evenly.
The height of a cycle tire varies depending on the type of bike and the size of the tire.
For example, a road bike tire may have a height of 23mm, while a mountain bike t
Top trending discussions
posted on 21 Feb 2025
I was interviewed in Aug 2024.
Non technical and technical questions
posted on 16 Jan 2024
I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.
I was interviewed in Sep 2023.
I'm qualify the aptitude test
The minimum number of bars provided in square and circle columns is 4.
Square column: 4 bars (2 bars in each direction)
Circle column: 4 bars (circumferential reinforcement)
The minimum diameter of bars used in a column depends on the structural requirements and design specifications.
The minimum diameter of bars used in a column is typically specified in the structural design drawings or codes.
Common minimum diameters for bars used in columns range from 10mm to 16mm, depending on the size and load-bearing capacity of the column.
The minimum diameter of bars may also vary based on the type o...
Grade of concrete refers to the strength of the concrete mix measured in terms of compressive strength.
Grade of concrete is denoted by the ratio of cement, sand, and aggregates in the mix.
It is represented by a number followed by the letter 'M' (e.g. M20, M30, etc.)
Higher grade of concrete indicates higher strength and durability.
Common grades of concrete used in construction are M20, M25, M30, etc.
posted on 16 May 2023
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers are used to increase or decrease the voltage of an alternating current (AC) power supply.
They consist of two coils of wire, known as the primary and secondary coils, which are wrapped around a magnetic core.
When an AC voltage is applied to the primary coil, it creates a magne...
A circuit breaker is an automatic electrical switch designed to protect an electrical circuit from damage caused by overload or short circuit.
It is used to interrupt the flow of current in an electrical circuit
It automatically trips and disconnects the circuit when it detects an overload or short circuit
It can be reset manually or automatically after tripping
It is commonly used in homes, buildings, and industrial setti...
Some basic aptitude belongs to maths and engineering
Discuss on environment topic with my batch mate
posted on 1 Jun 2022
I applied via Naukri.com and was interviewed in Dec 2021. There were 3 interview rounds.
posted on 16 Jan 2022
I applied via Campus Placement and was interviewed in Jan 2022. There was 1 interview round.
posted on 17 May 2022
I applied via Approached by Company and was interviewed in Nov 2021. There were 3 interview rounds.
Core subjects related questions
posted on 13 Feb 2022
I applied via campus placement at Maharaja Sayajirao University (MSU), Baroda and was interviewed before Feb 2021. There were 4 interview rounds.
General Reasoning, Mathematics, height and distance, English grammar etc.
A lattest current topic
Estimation of column, IS codes, Drawing Reading etc.
Estimation of column involves calculating the required amount of materials and labor for construction.
IS codes refer to the Indian Standards codes that provide guidelines for construction and engineering practices.
Drawing reading involves interpreting technical drawings and blueprints to understand the design and specifications of a structure.
Knowledge of these concep...
based on 1 interview
Interview experience
Assistant Manager
46
salaries
| ₹5.8 L/yr - ₹12.5 L/yr |
Senior Engineer
36
salaries
| ₹3.3 L/yr - ₹8.5 L/yr |
QA QC Engineer
25
salaries
| ₹3 L/yr - ₹8 L/yr |
Assistant Construction Manager
21
salaries
| ₹6 L/yr - ₹15 L/yr |
Safety Supervisor
21
salaries
| ₹2 L/yr - ₹4.5 L/yr |
Tata Projects
Shapoorji Pallonji Group
Hindustan Construction Company
GAMMON INDIA