Filter interviews by
I applied via Approached by Company and was interviewed before Oct 2021. There were 2 interview rounds.
PPAP stands for Production Part Approval Process. It is a standardized process in the automotive industry to ensure quality and consistency of parts.
PPAP is a set of documents and procedures that must be completed before a new part can be approved for production.
There are five levels of PPAP documentation, with each level requiring more extensive testing and documentation.
PPAP includes documents such as control plans, ...
A control plan is a document that outlines the steps to be taken to maintain quality standards during the manufacturing process.
It is a proactive approach to quality control
It identifies potential defects and outlines steps to prevent them
It includes information on process controls, inspection requirements, and corrective actions
It is a living document that is updated as needed
Examples include a control plan for a car ...
Top trending discussions
I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.
Electronics deals with the flow of electrons, while electrical focuses on the generation, distribution, and use of electricity.
Electronics is concerned with the behavior and control of electrons in devices and systems.
Electrical engineering deals with the generation, transmission, and use of electrical power.
Electronics involves designing and building electronic circuits and devices, such as computers and smartphones.
E...
An AND gate is a logic gate that outputs a high signal only when all of its inputs are high.
AND gate is a basic logic gate used in digital circuits.
It has two or more inputs and one output.
The output of an AND gate is true only when all of its inputs are true.
It follows the truth table: 0 AND 0 = 0, 0 AND 1 = 0, 1 AND 0 = 0, 1 AND 1 = 1.
AND gates are commonly used in computer processors, memory units, and other digital
A NOR gate is a logic gate that produces an output of true only when all of its inputs are false.
NOR gate is a type of logic gate that performs the logical NOR operation.
It has two or more inputs and one output.
The output of a NOR gate is true (or high) only when all of its inputs are false (or low).
It is the complement of the OR gate.
The truth table for a NOR gate is: 0 NOR 0 = 1, 0 NOR 1 = 0, 1 NOR 0 = 0, 1 NOR 1 = 0...
A basic gate is a fundamental building block of digital circuits that performs a specific logical operation.
Basic gates include AND, OR, NOT, NAND, NOR, and XOR gates.
AND gate outputs true only when all inputs are true.
OR gate outputs true when at least one input is true.
NOT gate inverts the input signal.
NAND gate outputs the negation of the AND gate.
NOR gate outputs the negation of the OR gate.
XOR gate outputs true wh
I applied via Company Website and was interviewed in Sep 2023. There were 2 interview rounds.
QC stands for Quality Control. It is a department responsible for ensuring products meet quality standards.
QC involves inspecting and testing products to ensure they meet quality standards
QC department is responsible for identifying defects and implementing corrective actions
Examples of QC activities include product testing, inspection, and quality audits
7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.
Check sheets: Used for collecting and organizing data, such as defect counts.
Histograms: Visual representation of data distribution to identify patterns.
Pareto charts: Helps prioritize issues by showing the most significant factors.
Cause-and-effect diagrams: Identifies root causes of problems.
Scatter diag...
I applied via Job Fair and was interviewed in Oct 2021. There were 2 interview rounds.
Quality materials and products are ensured through rigorous testing and inspection processes.
Establishing quality standards and specifications for materials and products
Conducting regular inspections and audits of suppliers and manufacturing processes
Performing thorough testing and analysis of materials and products
Implementing corrective actions and continuous improvement initiatives
Collaborating with cross-functional...
I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.
Electronics deals with the flow of electrons, while electrical focuses on the generation, distribution, and use of electricity.
Electronics is concerned with the behavior and control of electrons in devices and systems.
Electrical engineering deals with the generation, transmission, and use of electrical power.
Electronics involves designing and building electronic circuits and devices, such as computers and smartphones.
E...
An AND gate is a logic gate that outputs a high signal only when all of its inputs are high.
AND gate is a basic logic gate used in digital circuits.
It has two or more inputs and one output.
The output of an AND gate is true only when all of its inputs are true.
It follows the truth table: 0 AND 0 = 0, 0 AND 1 = 0, 1 AND 0 = 0, 1 AND 1 = 1.
AND gates are commonly used in computer processors, memory units, and other digital
A NOR gate is a logic gate that produces an output of true only when all of its inputs are false.
NOR gate is a type of logic gate that performs the logical NOR operation.
It has two or more inputs and one output.
The output of a NOR gate is true (or high) only when all of its inputs are false (or low).
It is the complement of the OR gate.
The truth table for a NOR gate is: 0 NOR 0 = 1, 0 NOR 1 = 0, 1 NOR 0 = 0, 1 NOR 1 = 0...
A basic gate is a fundamental building block of digital circuits that performs a specific logical operation.
Basic gates include AND, OR, NOT, NAND, NOR, and XOR gates.
AND gate outputs true only when all inputs are true.
OR gate outputs true when at least one input is true.
NOT gate inverts the input signal.
NAND gate outputs the negation of the AND gate.
NOR gate outputs the negation of the OR gate.
XOR gate outputs true wh
I applied via Company Website and was interviewed in Sep 2023. There were 2 interview rounds.
QC stands for Quality Control. It is a department responsible for ensuring products meet quality standards.
QC involves inspecting and testing products to ensure they meet quality standards
QC department is responsible for identifying defects and implementing corrective actions
Examples of QC activities include product testing, inspection, and quality audits
7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.
Check sheets: Used for collecting and organizing data, such as defect counts.
Histograms: Visual representation of data distribution to identify patterns.
Pareto charts: Helps prioritize issues by showing the most significant factors.
Cause-and-effect diagrams: Identifies root causes of problems.
Scatter diag...
I applied via Job Fair and was interviewed in Oct 2021. There were 2 interview rounds.
Quality materials and products are ensured through rigorous testing and inspection processes.
Establishing quality standards and specifications for materials and products
Conducting regular inspections and audits of suppliers and manufacturing processes
Performing thorough testing and analysis of materials and products
Implementing corrective actions and continuous improvement initiatives
Collaborating with cross-functional...
based on 2 reviews
Rating in categories
Quality Engineer
13
salaries
| ₹1.8 L/yr - ₹4.2 L/yr |
Assistant Manager
6
salaries
| ₹4.3 L/yr - ₹8.8 L/yr |
Maintenance Engineer
5
salaries
| ₹1.5 L/yr - ₹3.4 L/yr |
Senior Executive
5
salaries
| ₹3 L/yr - ₹4.9 L/yr |
QA Engineer
5
salaries
| ₹2.4 L/yr - ₹3.4 L/yr |
TCS
Infosys
Wipro
HCLTech