Filter interviews by
I prefer to handle the preparation of custom-related documents, addressing Bill of Entry queries, and completing the checklist for the Bill of Entry.
I have experience in preparing custom-related documents and addressing Bill of Entry queries.
I am detail-oriented and organized, ensuring all necessary information is included in the documents.
I am familiar with completing checklists for the Bill of Entry to ensure ac...
A basic gate is a fundamental building block of digital circuits that performs a specific logical operation.
Basic gates include AND, OR, NOT, NAND, NOR, and XOR gates.
AND gate outputs true only when all inputs are true.
OR gate outputs true when at least one input is true.
NOT gate inverts the input signal.
NAND gate outputs the negation of the AND gate.
NOR gate outputs the negation of the OR gate.
XOR gate outputs tr...
A NOR gate is a logic gate that produces an output of true only when all of its inputs are false.
NOR gate is a type of logic gate that performs the logical NOR operation.
It has two or more inputs and one output.
The output of a NOR gate is true (or high) only when all of its inputs are false (or low).
It is the complement of the OR gate.
The truth table for a NOR gate is: 0 NOR 0 = 1, 0 NOR 1 = 0, 1 NOR 0 = 0, 1 NOR ...
An AND gate is a logic gate that outputs a high signal only when all of its inputs are high.
AND gate is a basic logic gate used in digital circuits.
It has two or more inputs and one output.
The output of an AND gate is true only when all of its inputs are true.
It follows the truth table: 0 AND 0 = 0, 0 AND 1 = 0, 1 AND 0 = 0, 1 AND 1 = 1.
AND gates are commonly used in computer processors, memory units, and other di...
Relay ek electrical device hai jo signal ko control ya switch karne ke liye istemal hota hai.
Relay ek electromagnetic switch hai jo low power signal se high power circuit ko control karta hai.
Iska istemal automation systems, home appliances, aur industrial equipment mein hota hai.
Example: Aapka refrigerator relay ka istemal karta hai compressor ko on/off karne ke liye.
Relay ke types hain: Electromechanical relay, ...
Transformer ek electrical device hai jo voltage ko badalne ke liye istemal hota hai, AC current ke liye kaam karta hai.
Transformer do coils, primary aur secondary, se bana hota hai.
Yeh electromagnetic induction ke principle par kaam karta hai.
Step-up transformer voltage ko badhata hai, jaise ki power plants mein.
Step-down transformer voltage ko ghatata hai, jaise ki home appliances ke liye.
Yeh electrical transmiss...
ट्रान्सफार्मर विद्युत शक्ति को वोल्टता के स्तर को बदलने के लिए उपयोग किया जाता है, जिससे ऊर्जा का कुशल वितरण संभव होता है।
ट्रान्सफार्मर उच्च वोल्टता को कम वोल्टता में बदलता है, जैसे कि पावर प्लांट से घरों तक बिजली पहुंचाना।
कम वोल्टता को उच्च वोल्टता में बदलने के लिए, जैसे कि ट्रांसमिशन लाइनों में, जिससे ऊर्जा की हानि कम होती है।
उदाहरण: 11kV से 400V में ट्रान्सफार्मर का उपयोग घरेलू उपयोग के लिए।
उदाहरण: 220V से 11kV...
7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.
Check sheets: Used for collecting and organizing data, such as defect counts.
Histograms: Visual representation of data distribution to identify patterns.
Pareto charts: Helps prioritize issues by showing the most significant factors.
Cause-and-effect diagrams: Identifies root causes of problems.
Scatter...
To track soldering iron temperatures, use temperature monitoring devices and record the readings regularly.
Use temperature monitoring devices such as thermocouples or infrared thermometers
Place the temperature sensor near the soldering iron tip for accurate readings
Record the temperature readings at regular intervals or during specific soldering tasks
Maintain a log or database to track the temperature data over ti...
Quality materials and products are ensured through rigorous testing and inspection processes.
Establishing quality standards and specifications for materials and products
Conducting regular inspections and audits of suppliers and manufacturing processes
Performing thorough testing and analysis of materials and products
Implementing corrective actions and continuous improvement initiatives
Collaborating with cross-funct...
I appeared for an interview in Jan 2025.
The face-to-face interview for the department manager position was challenging but rewarding.
The interview panel consisted of senior managers and HR representatives.
I was asked about my previous experience in managing teams and handling difficult situations.
I had to provide examples of successful projects I had led in the past.
There were situational questions to assess my problem-solving skills and leadership abilities...
I prefer to handle the preparation of custom-related documents, addressing Bill of Entry queries, and completing the checklist for the Bill of Entry.
I have experience in preparing custom-related documents and addressing Bill of Entry queries.
I am detail-oriented and organized, ensuring all necessary information is included in the documents.
I am familiar with completing checklists for the Bill of Entry to ensure accurac...
I appeared for an interview in Dec 2024, where I was asked the following questions.
I hold a degree in Operations Management and have extensive experience in process optimization and team leadership.
Bachelor's degree in Operations Management from XYZ University.
5 years of experience in supply chain management at ABC Corp.
Certified Six Sigma Green Belt, improving process efficiency by 20%.
Proficient in data analysis tools like Excel and Tableau for decision-making.
Strong leadership skills demonstrated ...
I applied via Company Website
Transformer ek electrical device hai jo voltage ko badalne ke liye istemal hota hai, AC current ke liye kaam karta hai.
Transformer do coils, primary aur secondary, se bana hota hai.
Yeh electromagnetic induction ke principle par kaam karta hai.
Step-up transformer voltage ko badhata hai, jaise ki power plants mein.
Step-down transformer voltage ko ghatata hai, jaise ki home appliances ke liye.
Yeh electrical transmission m...
ट्रान्सफार्मर विद्युत शक्ति को वोल्टता के स्तर को बदलने के लिए उपयोग किया जाता है, जिससे ऊर्जा का कुशल वितरण संभव होता है।
ट्रान्सफार्मर उच्च वोल्टता को कम वोल्टता में बदलता है, जैसे कि पावर प्लांट से घरों तक बिजली पहुंचाना।
कम वोल्टता को उच्च वोल्टता में बदलने के लिए, जैसे कि ट्रांसमिशन लाइनों में, जिससे ऊर्जा की हानि कम होती है।
उदाहरण: 11kV से 400V में ट्रान्सफार्मर का उपयोग घरेलू उपयोग के लिए।
उदाहरण: 220V से 11kV में ...
Diode ek semiconductor device hai jo current ko ek direction mein flow karne deta hai, reverse direction mein nahi.
Diode ka basic function current ko rectify karna hai.
Yeh do terminals se bana hota hai: anode aur cathode.
Common types of diodes hain: PN junction diode, Zener diode, aur Schottky diode.
Example: Rectifier diodes AC ko DC mein convert karte hain.
Zener diodes voltage regulation ke liye use hote hain.
I applied via Company Website and was interviewed in Oct 2023. There were 2 interview rounds.
Relay ek electrical device hai jo signal ko control ya switch karne ke liye istemal hota hai.
Relay ek electromagnetic switch hai jo low power signal se high power circuit ko control karta hai.
Iska istemal automation systems, home appliances, aur industrial equipment mein hota hai.
Example: Aapka refrigerator relay ka istemal karta hai compressor ko on/off karne ke liye.
Relay ke types hain: Electromechanical relay, Solid...
Electronics deals with the flow of electrons, while electrical focuses on the generation, distribution, and use of electricity.
Electronics is concerned with the behavior and control of electrons in devices and systems.
Electrical engineering deals with the generation, transmission, and use of electrical power.
Electronics involves designing and building electronic circuits and devices, such as computers and smartphones.
E...
An AND gate is a logic gate that outputs a high signal only when all of its inputs are high.
AND gate is a basic logic gate used in digital circuits.
It has two or more inputs and one output.
The output of an AND gate is true only when all of its inputs are true.
It follows the truth table: 0 AND 0 = 0, 0 AND 1 = 0, 1 AND 0 = 0, 1 AND 1 = 1.
AND gates are commonly used in computer processors, memory units, and other digital...
A NOR gate is a logic gate that produces an output of true only when all of its inputs are false.
NOR gate is a type of logic gate that performs the logical NOR operation.
It has two or more inputs and one output.
The output of a NOR gate is true (or high) only when all of its inputs are false (or low).
It is the complement of the OR gate.
The truth table for a NOR gate is: 0 NOR 0 = 1, 0 NOR 1 = 0, 1 NOR 0 = 0, 1 NOR 1 = 0...
A basic gate is a fundamental building block of digital circuits that performs a specific logical operation.
Basic gates include AND, OR, NOT, NAND, NOR, and XOR gates.
AND gate outputs true only when all inputs are true.
OR gate outputs true when at least one input is true.
NOT gate inverts the input signal.
NAND gate outputs the negation of the AND gate.
NOR gate outputs the negation of the OR gate.
XOR gate outputs true wh...
I applied via Naukri.com and was interviewed in Aug 2023. There were 4 interview rounds.
एप्टीट्यूड टेस्ट का उपयोग यह अनुमान लगाने के लिए किया जाता है कि यदि किसी इंसान को उचित वातावरण और प्रशिक्षण दिया जाए तो वह व्यक्ति उस कार्य को कितनी काबिलियत के साथ कर सकता है
कोडिंग-डिकोडिंग परीक्षण को एक कोड को तोड़कर या डिकोड करके एक विशिष्ट शब्द या संदेश को समझने की एक परीक्षण-देने वाले की क्षमता का आकलन करने के लिए डिज़ाइन किया गया है।
ग्रुप डिस्कशन शुरू करने का सबसे अच्छा तरीका खोजने के लिए विचार करने के लिए एक अन्य प्रमुख फैक्टर्स विषय को सभी के हित के लिए एक अनूठे तरीके से प्रस्तुत करना है।
I appeared for an interview in Nov 2023.
I applied via Referral and was interviewed in May 2023. There were 5 interview rounds.
I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.
I applied via Company Website and was interviewed in Sep 2023. There were 2 interview rounds.
QC stands for Quality Control. It is a department responsible for ensuring products meet quality standards.
QC involves inspecting and testing products to ensure they meet quality standards
QC department is responsible for identifying defects and implementing corrective actions
Examples of QC activities include product testing, inspection, and quality audits
7QC tools are a set of quality control tools used for process improvement and problem-solving in quality management.
Check sheets: Used for collecting and organizing data, such as defect counts.
Histograms: Visual representation of data distribution to identify patterns.
Pareto charts: Helps prioritize issues by showing the most significant factors.
Cause-and-effect diagrams: Identifies root causes of problems.
Scatter diag...
I applied via Referral and was interviewed before May 2023. There were 3 interview rounds.
Top trending discussions
The duration of KHY ELECTRONIC interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 26 interview experiences
Difficulty level
Duration
based on 282 reviews
Rating in categories
Team Lead
65
salaries
| ₹2 L/yr - ₹4 L/yr |
Quality Engineer
42
salaries
| ₹1.8 L/yr - ₹4.2 L/yr |
Process Engineer
37
salaries
| ₹2 L/yr - ₹4.6 L/yr |
Floor Incharge
27
salaries
| ₹3.5 L/yr - ₹6.8 L/yr |
Assistant Team Leader
26
salaries
| ₹1.8 L/yr - ₹4.1 L/yr |
Primus Global Technologies
GAMMON INDIA
Magneti Marelli Motherson Auto System
TriGeo Technologies