Filter interviews by
SCADA can be configured by setting up communication protocols, defining data points, creating graphical interfaces, and configuring alarms.
Set up communication protocols such as Modbus, DNP3, or OPC to communicate with field devices
Define data points by specifying the tags for each device or sensor being monitored
Create graphical interfaces by designing screens that display real-time data in a user-friendly format
Confi...
I/O modules can be configured by setting up the input and output signals, assigning addresses, and configuring communication protocols.
Identify the type of I/O module being used (analog, digital, etc.)
Assign addresses to the input and output signals for communication
Configure the communication protocols such as Modbus, Profibus, etc.
Set up the parameters for data transmission and reception
Test the configured I/O module
Assigning an IP address involves configuring the network settings of a device to enable communication with other devices on the same network.
Access the network settings of the device
Choose a suitable IP address based on the network's subnet
Assign the IP address along with subnet mask and default gateway
Ensure no IP address conflicts with other devices on the network
Save the settings and test the connection
I applied via Referral and was interviewed before Oct 2021. There were 3 interview rounds.
Siemens plc models include S7-1200, S7-1500, S7-300, S7-400, and LOGO!
S7-1200
S7-1500
S7-300
S7-400
LOGO!
SPC stands for Statistical Process Control, a method used to monitor and control processes to ensure they are operating efficiently and within specifications.
SPC involves collecting and analyzing data to identify variations in a process
It helps in detecting and correcting issues before they result in defects
Common tools used in SPC include control charts, histograms, and Pareto charts
To configure a dp dp coupler, set the parameters for communication protocol, baud rate, address, and data format.
Set the communication protocol to match the devices being connected.
Configure the baud rate to ensure proper data transmission speed.
Assign a unique address to the dp dp coupler for identification.
Choose the appropriate data format for the connected devices.
Test the configuration to ensure proper communicati
I applied via Company Website and was interviewed in May 2024. There were 3 interview rounds.
Group discussion is the best Peter
JK Tyres interview questions for popular designations
I applied via Recruitment Consulltant and was interviewed in Oct 2023. There were 4 interview rounds.
Get interview-ready with Top JK Tyres Interview Questions
I applied via Walk-in and was interviewed in Mar 2024. There was 1 interview round.
I applied via Company Website and was interviewed before Jan 2024. There were 3 interview rounds.
DWM,Quality Circle,FIFO,HIPO,X ray hold classification Bulge dent classification,Technical process audit,Kaizen submission,Manpower handling etc..
I applied via Newspaper Ad and was interviewed in Dec 2023. There were 3 interview rounds.
Comple assignment within the required time frame
About self and about company
There are 0.0254 metres in 1 inch.
1 inch is equal to 0.0254 metres
To convert inches to metres, multiply the number of inches by 0.0254
For example, 10 inches is equal to 10 x 0.0254 = 0.254 metres
Top trending discussions
Some of the top questions asked at the JK Tyres interview -
The duration of JK Tyres interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 120 interviews
Interview experience
based on 1.6k reviews
Rating in categories
Oprating Engineer
375
salaries
| ₹1.7 L/yr - ₹6.6 L/yr |
Assistant Manager
264
salaries
| ₹5 L/yr - ₹13.3 L/yr |
Sales Officer
226
salaries
| ₹2.2 L/yr - ₹7.7 L/yr |
Senior Sales Officer
205
salaries
| ₹4.2 L/yr - ₹10.5 L/yr |
Deputy Manager
153
salaries
| ₹6 L/yr - ₹16 L/yr |
Apollo Tyres
Ceat Tyres
MRF Tyres
Bridgestone India Automotive Products