Upload Button Icon Add office photos

Jindal Steel and Power

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

Jindal Steel and Power Quality Assurance Engineer Trainee Interview Questions and Answers

Updated 26 Aug 2024

Jindal Steel and Power Quality Assurance Engineer Trainee Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Low of thermodynamics
  • Ans. 

    The second law of thermodynamics states that the total entropy of an isolated system can never decrease over time.

    • Entropy always increases in a closed system

    • Heat flows from hot to cold objects

    • Efficiency of energy conversion processes is limited by the second law

    • Examples: a cup of hot coffee cooling down, a car engine losing energy as heat

  • Answered by AI
  • Q2. Strength of material
  • Ans. 

    Strength of material refers to the ability of a material to withstand applied forces without failing.

    • Strength of material is typically measured in terms of tensile strength, yield strength, and ultimate strength.

    • Different materials have different strengths - for example, steel is stronger than aluminum.

    • Factors affecting strength include material composition, manufacturing process, and environmental conditions.

    • Strength ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Clearly talka bout yourself

Interview questions from similar companies

I was interviewed in Jul 2017.

Interview Preparation Tips

Round: Test
Experience: all job related technical question
Duration: 35 minutes
Total Questions: 30

Skills: Interest In The Job, Body Language In Interview

Interview Questionnaire 

5 Questions

  • Q1. 1. What is your Current role & responsibility?
  • Q2. 2. What should be your first action if any major failure?
  • Q3. 3. Describe about LOTO , WAH, & material handling?
  • Ans. 

    LOTO, WAH, and material handling are important safety procedures in engineering.

    • LOTO stands for Lockout/Tagout and is a safety procedure used to ensure that dangerous machines are properly shut off and not started up again before maintenance or repair work is completed.

    • WAH stands for Work at Height and refers to safety procedures used when working at elevated heights, such as on scaffolding or ladders.

    • Material handling...

  • Answered by AI
  • Q4. 4. Tell about your machine profile & process?
  • Ans. 

    I have experience working with various machines such as CNC machines, lathes, and milling machines. I am familiar with the process of designing, programming, and operating these machines.

    • Proficient in operating CNC machines

    • Experience with lathes and milling machines

    • Skilled in designing and programming machines

    • Knowledgeable in troubleshooting and maintenance

    • Familiar with safety protocols and regulations

  • Answered by AI
  • Q5. 5. What is special precautions during mold filling in rainy season?
  • Ans. 

    Special precautions during mold filling in rainy season

    • Ensure proper drainage system to avoid water accumulation

    • Cover the mold to prevent rainwater from entering

    • Increase mold temperature to compensate for high humidity

    • Use mold release agents to prevent water from sticking to the mold surface

    • Inspect mold for any signs of water damage before and after filling

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Always tell your Answers if you know exactly

Interview Questionnaire 

2 Questions

  • Q1. Steel Melting shop Related
  • Q2. Next job Vacancies??

Interview Preparation Tips

Interview preparation tips for other job seekers - Better preparation for job interview

I applied via Recruitment Consulltant and was interviewed in Nov 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all Resume tips
Round 2 - Technical 

(1 Question)

  • Q1. Types of maintenance
  • Ans. 

    Types of maintenance include corrective, preventive, predictive, and proactive maintenance.

    • Corrective maintenance involves fixing a problem after it has occurred.

    • Preventive maintenance involves regularly scheduled maintenance to prevent problems from occurring.

    • Predictive maintenance involves using data and analytics to predict when maintenance is needed.

    • Proactive maintenance involves identifying and addressing potentia...

  • Answered by AI
Round 3 - HR 

(2 Questions)

  • Q1. Asking about leadership qualities
  • Q2. Self goal and responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Organisation spending typical methods on third party verification about candidate's review , don't try any smart acts
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed in Jan 2024. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(4 Questions)

  • Q1. Self introduction asked technical questions
  • Q2. My name is Arvind rajbhar
  • Q3. I from chhattisgarh
  • Q4. My qualifications is diploma in electrical engineering)

Interview Preparation Tips

Topics to prepare for JSW Steel Junior Engineer interview:
  • Electrical Maintenance
Interview preparation tips for other job seekers - maintenance gt

I applied via Approached by Company and was interviewed in Nov 2021. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. About furnace and BLT
Round 2 - Technical 

(1 Question)

  • Q1. Normal hydraulic and engineering mechanics

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep proper knowledge which area you see
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. Electric Trasformar What is ohm law
  • Ans. 

    Ohm's Law states that the current flowing through a conductor is directly proportional to the voltage across it and inversely proportional to its resistance.

    • Ohm's Law is represented by the formula V = IR, where V is voltage, I is current, and R is resistance.

    • It helps in calculating the relationship between voltage, current, and resistance in an electrical circuit.

    • It is named after the German physicist Georg Simon Ohm w

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is induction motor
  • Ans. 

    An induction motor is a type of AC motor where power is supplied to the rotor by electromagnetic induction.

    • Induction motors are commonly used in various applications such as pumps, fans, compressors, and conveyor systems.

    • They do not require any physical connection between the rotor and the stator.

    • The rotating magnetic field in the stator induces current in the rotor, causing it to rotate.

    • Induction motors are efficient,...

  • Answered by AI

I applied via Campus Placement and was interviewed before Jul 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Current affairs and technical both questions will come be ready

Round 2 - Technical 

(2 Questions)

  • Q1. Question about what you studied technical branch that will ask
  • Q2. Round 3 HR Personal information, occupation of father and mother

Interview Preparation Tips

Topics to prepare for JSW Steel Junior Engineer interview:
  • Mechanical Engineering
  • Heat Treatment
  • Hot roller
  • Cold roller
Interview preparation tips for other job seekers - Good work environment, growth is good and I'm Lott of learned in this job
Contribute & help others!
anonymous
You can choose to be anonymous

Jindal Steel and Power Interview FAQs

How many rounds are there in Jindal Steel and Power Quality Assurance Engineer Trainee interview?
Jindal Steel and Power interview process usually has 1 rounds. The most common rounds in the Jindal Steel and Power interview process are Technical.
What are the top questions asked in Jindal Steel and Power Quality Assurance Engineer Trainee interview?

Some of the top questions asked at the Jindal Steel and Power Quality Assurance Engineer Trainee interview -

  1. Low of thermodynam...read more
  2. Strength of mater...read more

Recently Viewed

INTERVIEWS

Star Health & Allied Insurance

No Interviews

INTERVIEWS

PNB MetLife

No Interviews

INTERVIEWS

Aditya Birla Sun Life Insurance

No Interviews

INTERVIEWS

ICICI Prudential Life Insurance

No Interviews

INTERVIEWS

Kotak Mahindara Life Insurance

No Interviews

INTERVIEWS

Simplex Infrastructures

No Interviews

INTERVIEWS

Viraj Profiles

No Interviews

INTERVIEWS

Bajaj Allianz Life Insurance

No Interviews

DESIGNATION

INTERVIEWS

Tata AIA Life Insurance

No Interviews

Tell us how to improve this page.

Jindal Steel and Power Quality Assurance Engineer Trainee Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 588 Interviews
Jindal Stainless Interview Questions
4.2
 • 205 Interviews
JSW Group Interview Questions
3.9
 • 109 Interviews
Jindal Saw Interview Questions
4.0
 • 98 Interviews
Rashmi Metaliks Interview Questions
3.4
 • 77 Interviews
View all
Assistant Manager
2.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
977 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Engineer
763 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
615 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Jindal Steel and Power with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent