Filter interviews by
I was interviewed before Feb 2024.
Cleaning is the process of removing dirt, germs, and impurities from surfaces. Insuring cleaning is done involves proper training, supervision, and use of appropriate cleaning agents.
Cleaning involves removing dirt, germs, and impurities from surfaces to maintain hygiene.
Insuring cleaning is done involves proper training of staff on cleaning procedures.
Supervision is essential to ensure cleaning tasks are completed tho...
GMP stands for Good Manufacturing Practice, a set of guidelines ensuring products are consistently produced and controlled according to quality standards.
GMP is a system for ensuring that products are consistently produced and controlled according to quality standards.
It covers all aspects of production from the starting materials, premises, and equipment to the training and personal hygiene of staff.
Examples of GMP re...
HVAC stands for Heating, Ventilation, and Air Conditioning. AHU stands for Air Handling Unit.
HVAS/AHU are essential components of HVAC systems used to regulate and circulate air in buildings.
AHU typically consists of a blower, heating or cooling elements, filters, dampers, and sound attenuators.
They help maintain indoor air quality, temperature, and humidity levels for comfort and safety.
Examples of AHU include rooftop...
Housekeeping refers to the management and organization of a living or working space to maintain cleanliness and order.
Housekeeping involves cleaning and tidying up various areas such as bedrooms, bathrooms, kitchens, and common areas.
It includes tasks like dusting, vacuuming, mopping floors, and washing dishes.
Organizing items, decluttering spaces, and disposing of trash are also part of housekeeping.
Regular maintenanc...
Calibration is the process of comparing measurements of an instrument or device to a known standard to ensure accuracy.
Calibration involves adjusting the instrument or device to align with the standard
It is important to ensure accurate and reliable measurements
Calibration helps in maintaining quality control and meeting regulatory requirements
Examples include calibrating thermometers, scales, and pressure gauges
I applied via Approached by Company and was interviewed before Apr 2023. There were 2 interview rounds.
Deviation refers to the act of departing from the usual or accepted standards, especially in a production process.
Deviation can occur when a product does not meet the specified requirements or standards.
It can also refer to a change in a process or procedure that was not authorized.
Deviation must be documented and investigated to determine the root cause and prevent recurrence.
Examples of deviation include using incorr...
I applied via Recruitment Consulltant and was interviewed before Nov 2022. There were 2 interview rounds.
I have 5 years of experience in production planning and scheduling in a manufacturing industry.
Managed production schedules to meet deadlines
Coordinated with different departments for smooth workflow
Implemented lean manufacturing principles to improve efficiency
Ipca Laboratories interview questions for designations
I applied via Walk-in and was interviewed before Oct 2022. There were 3 interview rounds.
Get interview-ready with Top Ipca Laboratories Interview Questions
Top trending discussions
Validation in production involves ensuring that processes and products meet quality standards.
Validation involves verifying that equipment, processes, and systems are operating correctly and consistently.
Validation also includes confirming that products meet specifications and quality standards.
Documentation of validation activities is essential for regulatory compliance and continuous improvement.
Examples of validatio...
Safety permits are essential for ensuring compliance with regulations and maintaining a safe work environment.
Safety permits are required for certain activities or equipment to ensure they meet safety standards.
Production officers must be familiar with the types of safety permits needed in their industry.
They are responsible for obtaining and renewing safety permits as needed.
Failure to comply with safety permit requir...
Distillation is a process used to separate components of a liquid mixture based on differences in boiling points.
Distillation involves heating the liquid mixture to create vapor, then cooling the vapor to condense it back into liquid form.
The components with lower boiling points will vaporize first and be collected as the distillate, while the components with higher boiling points remain in the original container.
Commo...
Deviations in production processes must be promptly identified, investigated, and documented to ensure product quality and compliance.
Deviation should be reported immediately to the appropriate personnel
Investigate the root cause of the deviation
Document all findings and actions taken
Implement corrective and preventive actions to prevent recurrence
Review and approve deviation reports before closure
CAPA refers to Corrective and Preventive Actions taken to address non-conformities and prevent recurrence.
Identify the root cause of the issue
Develop a corrective action plan to address the issue
Implement the corrective action plan
Monitor the effectiveness of the corrective action
Implement preventive actions to prevent recurrence
Data integrity refers to the accuracy, consistency, and reliability of data throughout its lifecycle.
Ensuring data is accurate and reliable
Maintaining consistency of data
Preventing unauthorized access or modifications
Implementing data validation processes
Regularly backing up data to prevent loss
Batch failures should be analyzed to identify root causes and prevent future occurrences.
Investigate the root cause of the batch failure
Implement corrective actions to prevent future failures
Document the findings and actions taken for future reference
Communicate with relevant stakeholders about the batch failure and resolution
Conduct a review of the production process to identify potential areas for improvement
Handling of deviations involves identifying, investigating, and resolving any deviations from standard procedures or specifications.
Deviation should be documented and reported immediately
Investigate root cause of deviation
Implement corrective and preventive actions
Review and update procedures to prevent future deviations
posted on 13 Aug 2024
I applied via Campus Placement
Vent filter in RMG plays a crucial role in preventing contamination and maintaining the required air flow.
Vent filter helps in maintaining the required air flow in the RMG machine.
It prevents contamination by filtering out dust, particles, and other impurities from entering the machine.
Regular maintenance and replacement of vent filters are necessary to ensure optimal performance.
Vent filter also helps in maintaining t...
I applied via Campus Placement and was interviewed in Jun 2024. There was 1 interview round.
I applied via Walk-in and was interviewed in Sep 2023. There was 1 interview round.
Granulation process involves the formation of granules from powder particles.
Powder particles are agglomerated to form granules.
Granulation can be achieved through wet or dry methods.
Wet granulation involves adding a liquid binder to the powder mixture.
Dry granulation involves compacting the powder mixture without the use of liquids.
Examples of granulation equipment include fluid bed granulators and roller compactors.
Capsules are solid dosage forms in which the drug is enclosed in a hard or soft soluble container.
Capsules can be classified as hard gelatin capsules or soft gelatin capsules.
Hard gelatin capsules are made of two pieces that fit together, while soft gelatin capsules are made of a single piece.
Capsules can be filled with powder, granules, pellets, or liquids.
Examples of capsules include Tylenol capsules and Vitamin E ca
Two types of row material are natural materials and synthetic materials.
Natural materials come from plants, animals, or minerals (e.g. cotton, wool, wood)
Synthetic materials are man-made through chemical processes (e.g. plastic, nylon, polyester)
Raw material dispensing science involves the accurate measurement and distribution of materials for production.
Raw material dispensing involves measuring and distributing materials needed for production processes.
Accurate measurements are crucial to ensure the quality and consistency of the final product.
Proper labeling and storage of raw materials is essential to prevent mix-ups and contamination.
Automated dispensing ...
based on 4 interviews
Interview experience
based on 54 reviews
Rating in categories
Junior Officer
630
salaries
| ₹1.5 L/yr - ₹5 L/yr |
Officer
537
salaries
| ₹1.9 L/yr - ₹5.9 L/yr |
Senior Officer
447
salaries
| ₹2.8 L/yr - ₹8 L/yr |
Research Associate
237
salaries
| ₹1.8 L/yr - ₹6.1 L/yr |
Executive
235
salaries
| ₹3.8 L/yr - ₹9.6 L/yr |
Sun Pharmaceutical Industries
DRJ & CO
Cipla
Lupin