Filter interviews by
Subject matter experience and area of work
MLSS stands for Mixed Liquor Suspended Solids.
MLSS refers to the concentration of suspended solids in a mixed liquor sample.
It is an important parameter in wastewater treatment processes.
MLSS is measured in milligrams per liter (mg/L) or parts per million (ppm).
It indicates the biological activity and treatment efficiency of the system.
Maintaining optimal MLSS levels is crucial for effective wastewater treatment.
A flow diagram of an ETP shows the process of treating wastewater before it is discharged into the environment.
The flow diagram typically includes the different stages of treatment, such as screening, sedimentation, and disinfection.
It may also show the equipment used in each stage, such as pumps, filters, and chemical dosing systems.
The diagram should indicate the flow of water through the system, including any recirc...
To minimize hazardous waste, we implement measures such as waste reduction, recycling, and proper disposal.
We conduct waste audits to identify areas where waste can be reduced.
We implement a waste reduction program that includes reducing the use of hazardous materials.
We recycle materials such as paper, plastic, and metal.
We properly dispose of hazardous waste by following regulations and using licensed disposal facili...
Powder wastes should be disposed of properly to avoid environmental hazards.
Segregate the powder waste according to its type and toxicity level.
Dispose of non-hazardous powder waste in regular trash bins.
Hazardous powder waste should be collected in sealed containers and labeled properly.
Contact a licensed waste disposal company to properly dispose of hazardous powder waste.
Follow local and federal regulations for powd...
There are four types of fire: Class A, Class B, Class C, and Class D. Each type requires a specific type of fire extinguisher.
Class A fires involve ordinary combustibles such as wood, paper, or cloth. Water or foam extinguishers are suitable for this type of fire.
Class B fires involve flammable liquids such as gasoline or oil. Carbon dioxide or dry chemical extinguishers are suitable for this type of fire.
Class C fires...
Jockey pump is a small pump used to maintain pressure in a fire protection system.
Jockey pump is used in fire protection systems to maintain pressure in the system.
It is a small pump that operates continuously to keep the pressure within a certain range.
It is typically used in conjunction with larger fire pumps that are activated when the pressure drops below a certain level.
Jockey pumps are important for ensuring that...
Fire water capacity can be calculated based on the fire hazard classification and the size of the facility.
Determine the fire hazard classification of the facility
Calculate the required fire flow rate based on the classification
Determine the duration of the fire event
Multiply the fire flow rate by the duration to get the fire water capacity
Consider any additional factors such as fire department response time and water
Fire load can be calculated by determining the amount of combustible materials in a given area.
Identify all combustible materials in the area
Determine the weight or volume of each material
Calculate the heat release rate of each material
Add up the heat release rates to get the total fire load
Consider the ventilation and layout of the area in the calculation
Condensate water is generated in a boiler when steam is condensed back into water.
Condensate water is a byproduct of the steam generation process in a boiler
It is generated when steam is cooled and condensed back into water
This water is typically high in purity and can be reused in the boiler or for other purposes
Methods for generating condensate water include using heat exchangers or cooling towers
posted on 19 Feb 2025
I was interviewed before Feb 2024.
Ipca Laboratories interview questions for popular designations
I applied via Walk-in and was interviewed in Oct 2022. There were 2 interview rounds.
Coatings can be classified into various types based on their composition and application.
Organic coatings - made of carbon-based compounds, used for corrosion protection and aesthetics
Inorganic coatings - made of non-carbon-based compounds, used for high-temperature resistance and electrical insulation
Metal coatings - made of metals like zinc, aluminum, and copper, used for corrosion protection
Ceramic coatings - made o...
Get interview-ready with Top Ipca Laboratories Interview Questions
I applied via Campus Placement and was interviewed in May 2023. There were 3 interview rounds.
Pharmaceutics pharmacology
I applied via Referral and was interviewed before Nov 2023. There was 1 interview round.
Hydraulic and pneumatic circuits are used in machinery to transmit power using fluids or gases.
Hydraulic circuits use oil as the fluid to transmit power, while pneumatic circuits use air or gas.
Both circuits consist of a pump/compressor, valves, actuators, and reservoirs.
Hydraulic circuits are used in heavy machinery like excavators, while pneumatic circuits are used in tools like air compressors.
Hydraulic circuits pro...
I applied via LinkedIn and was interviewed in Jan 2023. There were 2 interview rounds.
I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 2 interview rounds.
Top trending discussions
Some of the top questions asked at the Ipca Laboratories interview -
The duration of Ipca Laboratories interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 167 interviews
Interview experience
based on 2.8k reviews
Rating in categories
Junior Officer
628
salaries
| ₹0 L/yr - ₹0 L/yr |
Officer
536
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Officer
444
salaries
| ₹0 L/yr - ₹0 L/yr |
Research Associate
239
salaries
| ₹0 L/yr - ₹0 L/yr |
Executive
230
salaries
| ₹0 L/yr - ₹0 L/yr |
Sun Pharmaceutical Industries
DRJ & CO
Cipla
Lupin