AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Huxley Industries Interview Questions, Process, and Tips
Huxley Industries Interview Experiences
1 interview found
Anonymous
(6 Questions)
- Q1. How to looking outtern
- Ans. Output quantity -80*2.2 this formula using
- Q2. How to boiling raw nuts.
- Ans.
Boiling raw nuts involves soaking them in water, bringing the water to a boil, and simmering until the nuts are tender.
Soak raw nuts in water for a few hours or overnight to soften them.
Bring a pot of water to a boil on the stove.
Add the soaked nuts to the boiling water and reduce heat to a simmer.
Cook the nuts until they are tender, usually around 1-2 hours depending on the type of nut.
Drain the nuts and let them cool
- Q3. How many key points in cashew processing
- Ans.
There are several key points in cashew processing, including harvesting, shelling, drying, peeling, grading, and packaging.
Harvesting the cashew nuts from the trees
Shelling to remove the outer shell
Drying the nuts to reduce moisture content
Peeling the inner skin of the nut
Grading the nuts based on size and quality
Packaging the processed cashews for distribution
- Q4. How much outtern difference in shelling to grading output
- Ans.
The outer difference in shelling to grading output can vary depending on factors such as equipment efficiency and quality control measures.
The outer difference in shelling to grading output can be influenced by the efficiency of the shelling process.
Quality control measures during grading can also impact the final output.
Factors such as the type of equipment used and the skill level of the production team can affect th...
- Q5. What is moiture of Finshed goods before packing
- Ans.
The moisture content of finished goods before packing is typically measured to ensure quality and shelf stability.
Moisture content is usually measured as a percentage of the total weight of the finished goods.
The ideal moisture content can vary depending on the type of product, but generally falls between 2-10%.
Excess moisture can lead to mold growth, spoilage, and reduced shelf life.
Moisture levels are often monitored...
- Q6. Which place after packed goods keeping
Interview Preparation Tips
Production Supervisor Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
Interview Preparation Tips
Experience: I was fulfilling their criteria of 60% through out the academics.
Round: Test
Experience: Aptitude was easy. It contained basics of Quants & Logic . Verbal or English part was bit difficult and length. There was a sectional time and sectional cut off.
Round: Interview
Experience: There was only one interview. Both Technical and HR questions were asked in the same interview. Prepare puzzles from the book Puzzles to puzzle you by Shakuntala Devi. This book helped me a lot. Technical questions were very basic but nearly from every subject.
General Tips: BE CONFIDENT. Speak Confident in Interview even if you are not good with ur english.
Skills: English language, Communication Skills, Reasoning Abilities
College Name: Jawaharlal Nehru Engineering College Aurangabad
Interview Preparation Tips
Experience: The resume was as per the norms of our institute’s placement office. One should mention only relevant points in the resume because if they ask you something from the resume and you are unable to answer then they will reject you bluntly.
Round: Test
Experience: In the written test the questions asked were mainly aptitude based. The company had sent us some sample question papers before the written test. The questions in the test appeared from those sample papers only. Most of the questions were tricky – questions were framed in a very lengthy manner and the answers or the data required to solve the question was hidden in the last few lines. Many students wasted their time analysing such questions completely. Out of the 80 odd students who appeared for the test only 11 qualified for the next round.
Round: Technical Interview
Experience: In the technical interview he asked me whether I knew programming, I replied in the negative. He asked me to suggest an algorithm to a problem. The problem was based on swapping of numbers. At first I gave a very bland reply. The interviewer wasn’t convinced by my reply and gave me another opportunity to explain me the process. This time I managed to answer appropriately. The interviewer then enquired about my internship and my projects.
Round: HR Interview
Experience: The HR interview was taken by some top company official. He asked me to narrate any challenging incident in my life that I had to struggle through to emerge out of it. One important thing to note here is that your CGPA would speak for you – if you have a good CGPA half the battle is won.
College Name: IIT ROORKEE
Motivation: TCS recruits a large number of students from various colleges across the country. Knowing this fact beforehand I was not much interested in joining the company. I appeared for its process as a last resort. The company had organized a pre-placement talk. I attended the talk and before appearing for the first round I went through the brochure that was given out during the pre-placement talk.
You do not require any specific information regarding the company to ace the interviews or any questionnaire.
Interview Questionnaire
7 Questions
- Q1. Say something about yourself?
- Q2. Asked on college project
- Q3. Which programming language do you know?
- Ans.
I know multiple programming languages including Java, Python, and C++.
Proficient in Java with experience in developing web applications using Spring framework
Familiar with Python for data analysis and machine learning
Experience in C++ for developing high-performance applications
Also familiar with HTML, CSS, and JavaScript for front-end development
- Q4. What is class, encapsulation and other feature of OOP?
- Ans.
Class is a blueprint for creating objects, encapsulation is the process of hiding data and methods within a class.
Class is a template or blueprint that defines the properties and behaviors of an object.
Encapsulation is the process of bundling data and methods together within a class, hiding the internal details from the outside world.
Other features of OOP include inheritance, polymorphism, and abstraction.
Inheritance a...
- Q5. Write a program to find the sum of the squares of each term of Fibonacci series
- Ans.
Program to find the sum of squares of each term of Fibonacci series
Generate Fibonacci series using loop or recursion
Calculate square of each term
Add all squares to get the sum
- Q6. What can I do for you?
- Q7. Why would you like to join Cognizant?
- Ans.
I would like to join Cognizant because of its reputation as a leading global technology and consulting company.
Cognizant has a strong presence in the industry and is known for its innovative solutions.
I am impressed by Cognizant's commitment to digital transformation and its ability to deliver value to clients.
The company offers excellent career growth opportunities and a supportive work environment.
Cognizant's diverse...
Interview Preparation Tips
Experience: Questions were simple but demanded faster solving ability especially the Quantitative ability section.
Tips: Solve every bit of R.S.Aggarwal for Aptitude problems. www.indiabix.com is a good site to solve questions from all the sections.
Duration: 90 minutes
Round: Interview
Experience: Started with self description to explaining what projects I was involved in. Talked about my role in the project. Then answered questions from C++ programming language and then wrote the program that the interviewer gave me to do.
Tips: Be Confident. Have the problem solving & "Yes I can Do" attitude. Go with a open mind. Listen to the interviewer carefully. Do not stammer. Keep yourself calm and cool. Be honest.
Round: Interview
Experience: Faced normal questions
Tips: Be confident & keep smiling. Keep track of your body language. Be fluent in speaking English.
General Tips: Be confident and a "can do" attitude will help you grab the job.
Skill Tips: """"
Skills: Communication Skill, Proficiency in English, Basic Computer Progamming Knowledge, Learning ability, Aptitude
College Name: IIT Madras
Skills evaluated in this interview
Interview Questionnaire
7 Questions
- Q1. Should “Social Media” technique be used for educational purposes
- Ans.
Yes, social media can be used for educational purposes.
Social media provides a platform for sharing educational content and resources.
It allows for collaboration and communication among students and teachers.
Social media can enhance learning through interactive discussions and real-time feedback.
It can also help in reaching a wider audience and promoting educational initiatives.
Examples include educational YouTube chan...
- Q2. Tell me something about youself
- Ans.
I am a highly motivated and experienced project engineer with a strong background in managing complex engineering projects.
I have a Bachelor's degree in Engineering and have been working as a project engineer for the past 5 years.
I have successfully managed multiple projects from conception to completion, ensuring they are delivered on time and within budget.
I have a proven track record of effectively coordinating with...
- Q3. About the company
- Q4. Who is the present CEO
- Ans.
The present CEO is John Smith.
John Smith is the current CEO of the company.
He has been in this position since 2015.
Under his leadership, the company has experienced significant growth and expansion.
John Smith has a strong background in engineering and project management.
He is known for his strategic vision and ability to drive innovation.
- Q5. Extra-acads related questions
- Q6. Coding related questions(only if your CV shows you are a coding studd)
- Q7. Situation based questions
Interview Preparation Tips
Experience: Its not an elimination round, you can go with your informal clothes on. Any one who has prepared for day 1 and day2 companies will get through this round. Just read news papers and learn to shoot graphs here and there even if it has got absolutely no facts and definitely practice to write a lot.
Tips: Be prepared with both for and against the topic coz the interviewer keeps changing the topic in between the GD.The topic was same as that of the case study Don’t write bullet-ed points, this makes your cases look small. Try applying your vocabulary spectrum. Try to give exhibits even if you don’t know any facts.
Round: Group Discussion
Experience: 12 students on the table, one interviewer.
Tips: Play old school .But don’t wait for your chance, just break into it, but with a gentlemanly attitude. Try giving examples. Throw arbitrary facts to prove your points, if you don’t remember the real figures.
Round: Interview
Tips: Don’t start with your brilliancein your core subject. Tell them you hate your department. Convince them that you won’t ditch them for a Ph.D or an MBA. Tell them you have a friend at Wipro who keeps giving you intel about how great the company is. Look confident and if at times you can be funny, they will appreciate it!!
Skill Tips: 8 and above CGPA is required. Later it was lowered to 7.9, mine was 7.98. They mainly ask HR questions, so being involved in Extra-academic activities gives you more that you can talk of. I had an eye for coding in C++. Helped me on this, but my extra-academics list was enough. Coding was just a bonus. If they are non core its better. But my both the internships were core based. You just have to convince them why you are dropping from core.
College Name: IIT KHARAGPUR
Interview Preparation Tips
Experience: Deloitte selection procedure involves a written test which is
same as CAT format (certainly not that tough). Though I had not joined any test series to prepare for it, but I must strongly recommend that you should actually join a test series (provided by Career Launcher or
TIME). This test series will actually help you to synchronize your mind to the format and moreover it would help to refresh the question solving skills which you used to exercise while preparing for JEE.
Round: Group Discussion
Experience: general topic is given (mostly it is as to how you would go for implementing a new type of technology in a company, and hence you all have to decide the stepwise procedure for the implementation), then whole of the group is called in presentation room where each one is told personally to speak about the same topic as that of GD. This constitutes
second round. Finally, if you clear it, you get to face the interviews.
Tips: From now onwards, start reading newspaper daily. Just give at least one hour reading the editorials from newspaper and make it your habit. Not only for GD's, but for life in general, its very important that you should have a certain view about things happening around you and in the world and newspapers are the best thing which help you form your views and also know about the expert opinions on day to day topics. So, make sure that you read newspaper daily.
Round: Other Interview
Experience: For interview, main thing is that you should be well conversed about everything you have mentioned on your resume. So, before you go for any interview, just make sure that you can speak about for 5 minutes on
every single thing in resume. Deloitte is a company which is open for all the btech students and hence its mainly looking for the students who have a right attitude and are good at their interests.
Tips: have a perfect set of communication skills. I had not done
any special type of preparations for the interview or group discussions but all these skills actually developed during these years. I would advise that in order to gain more confidence at speaking, you should start taking challenges from now on and should actively participate in any sort of debates and GD.
College Name: IIT Roorkee
Interview Questionnaire
6 Questions
- Q1. Which is your favorite subject
- Q2. Difference between C and C++
- Q3. What are the advantages of C++ over C
- Q4. What is polymorphism and how do we achieve it using C++ programming
- Ans.
Polymorphism is the ability of an object to take on many forms. In C++, it is achieved through function overloading and virtual functions.
Polymorphism allows objects of different classes to be treated as objects of a common base class.
Function overloading enables multiple functions with the same name but different parameters.
Virtual functions allow derived classes to override base class functions.
- Q5. What will you do if you have a clash with your colleague
- Q6. If you are given extra work in the office and your girl friend is waiting for you outside, then what will you do
Interview Preparation Tips
Experience: One written test. It contains four sections. Each section contains 25 questions and is of 30 minutes duration.
Tips: Prepare well for technical and aptitude.
Duration: 120 minutes
Total Questions: 100
Round: Technical Interview
Experience: Questions were asked based on my favorite subject.
Tips: Choose your favorite subject as the one you know well.
Round: HR Interview
Experience: He gave me situations to see how I would handle them.
Tips: You must justify yourself with your answers.
General Tips: Brush up all the basics of your core subjects.
Skills: Good technical skills., Good communication skills.
College Name: NA
Skills evaluated in this interview
Interview Questionnaire
8 Questions
- Q1. Give a brief introduction about yourself
- Q2. Explain any one topic from your area of interest
- Q3. Do you know C language? If yes then write a program to print numbers from 1 to 10 excluding 5
- Ans.
Yes, I know C language. Here's a program to print numbers from 1 to 10 excluding 5.
Use a loop to iterate from 1 to 10
Inside the loop, check if the current number is equal to 5
If it is not equal to 5, print the number
- Q4. Recall any question from the quantitative ability section of the test and explain how did you approach the problem
- Ans.
The question was about finding the average of a set of numbers.
I approached the problem by first summing all the numbers in the set.
Then, I divided the sum by the total number of elements in the set to find the average.
I used a loop to iterate through the set and keep track of the sum and count of elements.
- Q5. What all does it take for a person from an electronics background to go into the programming field?
- Q6. Where are you from?
- Q7. How was your technical interview round?
- Q8. Are you willing to relocate?
Interview Preparation Tips
Experience: The online test was of an average difficulty level. There was sufficient time to complete all the questions on time. and there was a negative marking of 0.25.
Tips: One should be thorough with the basics of english, and quantitative ability. Reasoning section needed a lot of practice so as to save time.
Duration: 60 minutes
Total Questions: 50
Round: Technical Interview
Experience: I had a very good experience answering the aforementioned questions as i was confident in all my answers. i did not have a thorough knowledge of c language, So i told the interviewer that i am not adept with programming but i can still try. Hence the interviewer told me that even if i go wrong in programming, he won't be marking me on that basis.
Tips: Always speak the truth whether you know a particular subject or not. This helps the interviewer form an overall idea about you.Put forward your views in a soft and gentle but assertive tone.
Round: HR Interview
Experience: The HR round of interviews was a more general round concerned in knowing the candidate as a person, irrespective of his/ her merits and achievements. It focussed on forming an idea about our personality as an individual
Tips: Be calm, composed and patient in front of the interviewer.
General Tips: One should not be scared or nervous about placements. Patience and confidence should be maintained throughout the recruitment process. Practice placement papers from various websites and also keep yourself updated with current affairs.
Skill Tips: A lot of practice is required to gain speed in doing calculations.
Skills: Speed, Knowledge , Communication Skills
College Name: SRM UNIVERSITY
Motivation: The main motivation for applying to iGATE was the company is a major IT service provider and had been listed in the 100 fastest growing companies by Fortune magazine. Since i had been rejected in companies like Wipro, CTS, Infosys, i applied to this company in the hope of getting selected. Other motivations were my college seniors and teachers.
Funny Moments: When the technical interviewer asked me to explain any topic from my area of interest, I was shocked for a minute because i could not believe that i had been granted so much liberty of choosing any topic from my subject.To crosscheck what i had hear was true or not, i reassured myself by asking him whether he was sure or not. Then the interviewer smiled and told me to proceed.
Skills evaluated in this interview
Interview Questionnaire
14 Questions
- Q1. Given n-ary tree, print the nodes in level-order zig-zag manner. O(n) time
- Q2. Given a BST find the number of pair of nodes which sum upto a given value. O(n) time, O(1) space
- Q3. Given a 2D plane and n points, find the line which passes through maximum number of lines
- Q4. If a/b is recurring like 10/3 print 10/3 as 3.(3), 16/6 as 2.(6)
- Q5. Explain caching, implement LRU caching
- Ans.
Caching is the process of storing frequently used data in a temporary storage to reduce access time. LRU caching removes least recently used data.
Caching improves performance by reducing access time to frequently used data
LRU (Least Recently Used) caching removes the least recently used data to make space for new data
LRU cache can be implemented using a doubly linked list and a hash map
When a cache hit occurs, the acce...
- Q6. Explain working of DNS, implement domain search in DNS
- Q7. What is hashing. Implement domain search using hashing
- Q8. Given a string of alphabet of at most 5 characters. Write a function which returns a unique number for each string with O(1) space
- Q9. Explain working of virtual function
- Q10. There is pointer of base class pointing to derived class. Explain the working with respect to the pointer, if this pointer calls the virtual function of base class
- Q11. How does write head take a value from process buffer and writes on a particular address (Explanation of address bus and register needed)
- Q12. Clone a linked list having an arbit pointer
- Q13. You are given deque(), enque(), isEmpty() function for queue, implement push(), pop(), min() functions of stack. O(1) time was required for min()
- Q14. Convert a binary tree to a DLL such that a next node for DLL is selected in a top down order in zig-zag manner. O(n) space was allowed, but not O(2n)
Interview Preparation Tips
Experience: 1. 20 MCQ
2. 2 coding questions
• Find the diameter of a tree
• Print all anagrams pair in separate line
Round: Technical Interview
Experience: Find the next larger element in a BST, given key might not be in the BST. O(logn) time and O(1) space.Delete all nodes on a DLL whose data is a multiple of 5. O(n) time
College Name: BIT Mesra
Skills evaluated in this interview
THEJUS R
Interview Questionnaire
1 Question
- Q1. Questions were all resume based. Gave importance to Posiions of responsibilities
Interview Preparation Tips
Experience: I talked second and took a stance of defence with development. I tried to talk intermittently for a duration of approx 40 sec each time and for a total of 5 times.
Tips: U should be the guy who had talked the most in GD but care should be taken not to dominate it. Try to tell maximum number of points and try to exhaust all the points when you get your first opportunity.
Duration: 8 minutes
Round: Interview
Experience: They were just checking whether you have the necessary communication and managerial skills and how well you handle the stresses of interview.
Tips: Being thorough with the nooks and corner of your resume and keeping your head cool alone will ensure you get shortlisted.
General Tips: Stay coool throughout the process :)
College Name: IIT Madras
Huxley Industries Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Executive Interview Questions
- Analyst Interview Questions
- Team Lead Interview Questions
- Design Engineer Interview Questions
- Senior Associate Interview Questions
- Graduate Engineer Trainee (Get) Interview Questions
- Associate Software Engineer Interview Questions
- Java Developer Interview Questions
- Show more
Huxley Industries Interview Process
based on 1 interview
Interview experience
Interview Questions from Similar Companies
Huxley Industries Reviews and Ratings
based on 2 reviews
Rating in categories
|
Production Engineer
3
salaries
|  ₹9.7 L/yr - ₹10.7 L/yr |
TCS
Accenture
Wipro
Cognizant
- Home >
- Interviews >
- Huxley Industries Interview Questions
