Filter interviews by
I applied via Recruitment Consulltant and was interviewed in Jun 2024. There were 2 interview rounds.
Mathematics questions, general knowledge inquiries, and logical reasoning challenges.
I am a recent graduate with a degree in engineering, eager to learn and contribute to the field.
Recent graduate with a degree in engineering
Passionate about learning and contributing to the field
Eager to apply theoretical knowledge in practical scenarios
The least count of a Vernier caliper is 0.02 mm and the least count of a micrometer is 0.01 mm.
Vernier caliper least count: 0.02 mm
Micrometer least count: 0.01 mm
I was interviewed in May 2024.
I applied via Campus Placement and was interviewed in Jan 2024. There was 1 interview round.
A transformer is a device that transfers electrical energy between two or more circuits through electromagnetic induction. The red wire is typically used as the primary winding in a transformer.
A transformer is a static device that transfers electrical energy between two or more circuits through electromagnetic induction.
The primary winding of a transformer is usually connected to the red wire.
The red wire is responsib...
Transformers work on the principle of electromagnetic induction to transfer electrical energy between two or more circuits.
Transformers have two coils of wire, known as the primary and secondary coils.
When an alternating current flows through the primary coil, it creates a changing magnetic field.
This changing magnetic field induces a voltage in the secondary coil, transferring electrical energy between the coils.
The r...
Types of transformers include step-up, step-down, isolation, autotransformer, and instrument transformers.
Step-up transformer increases voltage output
Step-down transformer decreases voltage output
Isolation transformer provides electrical isolation between primary and secondary windings
Autotransformer has a single winding with multiple taps for different voltage levels
Instrument transformers are used for measuring curre
Red wires are typically used for power connections in electrical circuits.
Red wires are commonly used to connect power sources such as batteries or power supplies to electrical components.
They are also used for connecting switches or outlets to the power source.
In some cases, red wires may indicate a live or hot wire in a circuit.
Red wires are often paired with black wires, which are used for grounding purposes.
It is i...
Copper wires are commonly used for earthing due to their high conductivity and corrosion resistance.
Copper wires are the most commonly used for earthing due to their high conductivity.
Galvanized steel wires can also be used for earthing as they are durable and corrosion-resistant.
Aluminum wires are another option for earthing, but they are less commonly used due to their lower conductivity compared to copper.
The size a...
I applied via Naukri.com and was interviewed in Mar 2024. There was 1 interview round.
Hitachi Astemo Rajasthan Brake Systems interview questions for popular designations
A fuel injector is a component in an internal combustion engine that delivers fuel into the combustion chamber.
Fuel injector is responsible for delivering the right amount of fuel at the right time for combustion
CNG (Compressed Natural Gas) is a type of fuel used in some vehicles, while a fuel injector is a component that delivers fuel in liquid form
The symbol for first angle of projection is a right angle triangle wit...
I applied via Walk-in
Different types of breakers include circuit breakers, fuse breakers, and earth leakage circuit breakers.
Circuit breakers are automatic electrical switches designed to protect an electrical circuit from damage caused by overload or short circuit.
Fuse breakers use a fuse to interrupt the circuit when an overload occurs.
Earth leakage circuit breakers detect small stray voltages on the metal enclosures of electrical equipm...
Hydraulic brakes work by using fluid pressure to transfer force from the brake pedal to the brake pads, resulting in the vehicle slowing down or stopping.
Hydraulic brakes use brake fluid to transfer force from the brake pedal to the brake pads
When the brake pedal is pressed, the brake fluid is forced through the brake lines to the brake calipers
The brake calipers then squeeze the brake pads against the brake rotors, cr...
The principal of hydraulic brake is based on Pascal's law, which states that pressure applied to a fluid in a closed system will be transmitted equally in all directions.
Hydraulic brake system uses brake fluid to transmit pressure from the brake pedal to the brake calipers or wheel cylinders.
When the brake pedal is pressed, the brake fluid is forced through the brake lines, applying pressure to the brake pads or shoes,...
5s is a methodology for organizing a workplace, focusing on efficiency and effectiveness by maintaining cleanliness and order.
Sort - Separate necessary items from unnecessary ones.
Set in order - Arrange items in a logical and efficient manner.
Shine - Clean and inspect the work area regularly.
Standardize - Establish standards and procedures for maintaining the first three S's.
Sustain - Ensure the practices are consisten...
Kaizen is a Japanese business philosophy of continuous improvement in processes and products.
Kaizen focuses on making small, incremental changes to improve efficiency and quality.
It involves all employees in the organization, from top management to frontline workers.
Kaizen promotes a culture of continuous learning and innovation.
Examples of kaizen include implementing 5S methodology, setting up suggestion systems, and
Casting is a manufacturing process in which a liquid material is poured into a mold, where it solidifies into the desired shape.
Liquid material is poured into a mold
Material solidifies into desired shape
Commonly used for metal objects like engine blocks and sculptures
I applied via Approached by Company and was interviewed in May 2023. There were 3 interview rounds.
I have a strong background in sales and account management, with experience in building and maintaining client relationships.
5+ years of experience in sales and account management
Proven track record of exceeding sales targets
Skilled in building and maintaining client relationships
Experience in developing sales strategies and proposals
Strong communication and negotiation skills
Top trending discussions
Some of the top questions asked at the Hitachi Astemo Rajasthan Brake Systems interview -
The duration of Hitachi Astemo Rajasthan Brake Systems interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 28 interviews
Interview experience
based on 205 reviews
Rating in categories
Diploma Trainee Engineer
139
salaries
| ₹0 L/yr - ₹0 L/yr |
Supervisor
57
salaries
| ₹0 L/yr - ₹0 L/yr |
DET
53
salaries
| ₹0 L/yr - ₹0 L/yr |
Junior Engineer
52
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
28
salaries
| ₹0 L/yr - ₹0 L/yr |
Bosch
Continental Automotive Components
ZF Steering Gear
ZF Commercial Vehicle Control Systems