Upload Button Icon Add office photos

Filter interviews by

Gulf Contracting Co. WLL Interview Questions, Process, and Tips

Updated 4 Aug 2024

Top Gulf Contracting Co. WLL Interview Questions and Answers

Gulf Contracting Co. WLL Interview Experiences

Popular Designations

2 interviews found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Aug 2023. There were 5 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. Grade of steel used in construction
  • Ans. 

    Grade of steel used in construction varies based on the specific requirements of the project, with common grades including A36, A572, and A588.

    • Grade of steel used in construction depends on factors such as strength, corrosion resistance, and weldability.

    • Common grades of steel used in construction include A36, A572, and A588.

    • Higher grade steels like A572 and A588 are often used for structural components in buildings and...

  • Answered by AI
  • Q2. Concrete proportions
Round 2 - Technical 

(2 Questions)

  • Q1. Important of Curring in construction
  • Ans. 

    Curing in construction is essential for ensuring the strength and durability of concrete structures.

    • Curing helps in maintaining the moisture content in concrete, allowing it to properly hydrate and gain strength.

    • Proper curing reduces the risk of cracking and increases the longevity of the structure.

    • Common curing methods include water curing, membrane curing, and curing compounds.

    • Examples of curing techniques include co...

  • Answered by AI
  • Q2. Formwork load weight
Round 3 - Technical 

(2 Questions)

  • Q1. Safe bearing capacity of soil
  • Ans. 

    Safe bearing capacity of soil refers to the maximum pressure that can be applied to the soil without risking shear failure.

    • Safe bearing capacity is determined by conducting soil tests such as standard penetration tests or cone penetration tests.

    • Factors affecting safe bearing capacity include soil type, moisture content, and depth of the soil.

    • It is important to consider the safe bearing capacity when designing foundatio...

  • Answered by AI
  • Q2. Cube test of concrete
  • Ans. 

    Cube test of concrete is a method to determine the compressive strength of concrete by casting cubes and testing them after a specified curing period.

    • Cube test involves casting concrete cubes of standard size and curing them under specified conditions.

    • After the curing period, the cubes are tested in a compression testing machine to determine their compressive strength.

    • The compressive strength of concrete is an importan...

  • Answered by AI
Round 4 - HR 

(2 Questions)

  • Q1. Experience as civil engineer
  • Ans. 

    I have over 10 years of experience as a civil engineer working on various projects including infrastructure development and construction management.

    • Managed multiple construction projects from planning to completion

    • Designed and implemented structural engineering solutions

    • Collaborated with architects, contractors, and government agencies

    • Ensured compliance with building codes and regulations

    • Performed site inspections and ...

  • Answered by AI
  • Q2. Salary/accommodation/ transportation/ medical
Round 5 - Assignment 

Project lesson learn

Senior Project Engineer Interview Questions asked at other Companies

Q1. Types of road:- 1 Flexible pavements .... .. . 2 Rigid pavements Flexible pavement:- embankment thickness 3m,large size soil particles 75mm lumps and cloud. Liquid limit <50% ,plastic limit<25%, swelling and shrnkag<50%, cbr as per... read more
View answer (2)

Interview Questionnaire 

1 Question

  • Q1. FIDIC

Interview Preparation Tips

Interview preparation tips for other job seekers - Learn FIDIC from the start to end.

Assistant Quantity Surveyor Interview Questions asked at other Companies

Q1. Do sub-contractors prepare bills?
View answer (1)

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Easy
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before May 2018. There were 2 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. What is Your Current Sallary.
  • Ans. 

    I am currently earning $60,000 per year.

    • My current salary is $60,000 per year.

    • I am satisfied with my current salary.

    • I believe my salary reflects my experience and qualifications.

  • Answered by AI
  • Q2. Expected salary
  • Q3. Negotiable sallary how much you negotiate.
  • Q4. Yourself Introduction.
  • Q5. About Your projects, experience and some technical question . I.e. procedure of work , productivity of workman and how to start your activities etc.

Interview Preparation Tips

You should be confident don't be nervous and Give your best.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
2-4 weeks
Result
Selected Selected

I was interviewed before May 2017.

Interview Questionnaire 

4 Questions

  • Q1. Good discussion with accounts team
  • Q2. Having good discussion with team
  • Q3. Good discussion for salary and others
  • Q4. Good company for working
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Question IFc drawing and ISo drawing
Round 3 - One-on-one 

(1 Question)

  • Q1. Technology and document controller
Round 4 - HR 

(1 Question)

  • Q1. About locations and payment

Interview Preparation Tips

Interview preparation tips for other job seekers - Make continuous improvement and keep roles in mind in document controller management

I applied via LinkedIn and was interviewed in Aug 2021. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Detailed process and documentation of hedging.
  • Ans. 

    Hedging process involves identifying risks, selecting appropriate instruments, and documenting the strategy.

    • Identify the risks to be hedged

    • Select appropriate hedging instruments

    • Document the hedging strategy and rationale

    • Monitor and adjust the hedge as necessary

    • Ensure compliance with regulatory requirements

    • Examples of hedging instruments include futures, options, and swaps

  • Answered by AI
  • Q2. Don't know answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Very good experience with Mr Divya Raghuvanshi and Yogesh sir

Many more questions asked by sir
Each and every small point they ask
Don't bluff in cv
They ask all through your cv only
Good discussion for 40 mins
Very much talented ppl
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-

Interview Questionnaire 

2 Questions

  • Q1. Type of pile , why we provide pile,pile dia , lvup vup svup type questions
  • Ans. 

    Piles are used in construction to transfer loads from a structure to a stronger layer of soil or rock below the surface.

    • Types of piles include driven piles, bored piles, and screw piles.

    • Piles are provided to support structures on weak or compressible soil, to resist uplift forces, or to provide lateral support.

    • The diameter of a pile is determined based on the load it needs to support and the soil conditions.

    • LVUP (Large...

  • Answered by AI
  • Q2. Mostly we use two types of pile (1) friction pile (2)end bearing pile

Interview Preparation Tips

Interview preparation tips for other job seekers - Please read MORTH AN

Senior Designer Bim Interview Questions & Answers

AECOM user image Anonymous

posted on 10 Feb 2021

Interview Questionnaire 

2 Questions

  • Q1. Why do you want to join Aecom.
  • Q2. What kind of projects have you done? And what is the probem face of them. And how to resolve.

Interview Preparation Tips

Interview preparation tips for other job seekers - Aecom is a big name in the engineering field, here we will get a lot to learn so that our future will grow well. Tell the truth about what you know or else you will face problems. Because next you have to do all the work yourself. Because of the high work load, no one can help you much. I worked at Aecom for seven years. I have learned a lot there. Salary always comes on time. Due to pendamic we had to leave the job due to lack of work. But the Aecom company had done our full and final settelement within a month. Aecom is a very good company. If I get a chance to work in the company again, I would definitely like to join. Workload is very high. Deadline is very less, which affects its quality of work.

I applied via Naukri.com and was interviewed in Sep 2020. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. How much cement used for making 1m³ concrete
  • Ans. 

    The amount of cement used for making 1m³ of concrete varies depending on the desired strength and type of concrete.

    • The cement content typically ranges from 300 to 400 kg/m³ for general-purpose concrete.

    • For high-strength concrete, the cement content can be as high as 500 kg/m³ or more.

    • The water-cement ratio also affects the amount of cement required.

    • Admixtures and additives may be used to modify the properties of the co...

  • Answered by AI
  • Q2. 360 kg
  • Q3. How much steel used for 1m³ concreting
  • Ans. 

    The amount of steel used for 1m³ concreting varies depending on the type of concrete and the structural requirements.

    • The steel used in concrete is typically in the form of reinforcing bars (rebar) or welded wire mesh.

    • The amount of steel required for 1m³ of concrete depends on the structural requirements and the type of concrete being used.

    • For example, a standard reinforced concrete slab may require 70-100 kg of steel p...

  • Answered by AI
  • Q4. This answer given by a formula & some thumbrules of this answer

Interview Preparation Tips

Interview preparation tips for other job seekers - Basic knowledge is the best knowledge.....interviewer asked so much questions to ask but I'm ready to give his answers .It lasted for about 30 minutes.Luckily I was able to answer most of the questions correctly. I tried to give my best. My advice is to stay calm & should apply presence of mind.

Interview Questionnaire 

2 Questions

  • Q1. HSE Policy & Audit reports
  • Q2. HSE Documentation & HSE Trainer

Gulf Contracting Co. WLL Interview FAQs

How many rounds are there in Gulf Contracting Co. WLL interview?
Gulf Contracting Co. WLL interview process usually has 5 rounds. The most common rounds in the Gulf Contracting Co. WLL interview process are Technical, HR and Assignment.
How to prepare for Gulf Contracting Co. WLL interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Gulf Contracting Co. WLL. The most common topics and skills that interviewers at Gulf Contracting Co. WLL expect are Design Development, Architecture, Bim, Communication Skills and Concept Design.
What are the top questions asked in Gulf Contracting Co. WLL interview?

Some of the top questions asked at the Gulf Contracting Co. WLL interview -

  1. Grade of steel used in construct...read more
  2. Important of Curring in construct...read more
  3. Safe bearing capacity of s...read more

Tell us how to improve this page.

Gulf Contracting Co. WLL Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Gulf Contracting Co. WLL Reviews and Ratings

based on 66 reviews

4.5/5

Rating in categories

4.6

Skill development

4.1

Work-life balance

3.9

Salary

4.6

Job security

4.4

Company culture

3.5

Promotions

4.5

Work satisfaction

Explore 66 Reviews and Ratings
Civil Engineer
10 salaries
unlock blur

₹10 L/yr - ₹15.8 L/yr

HSE Officer
9 salaries
unlock blur

₹7.8 L/yr - ₹14 L/yr

Construction Management
5 salaries
unlock blur

₹36 L/yr - ₹55 L/yr

QA QC Engineer
4 salaries
unlock blur

₹11.2 L/yr - ₹24 L/yr

Safety Engineer
4 salaries
unlock blur

₹6 L/yr - ₹6 L/yr

Explore more salaries
Compare Gulf Contracting Co. WLL with

Larsen & Toubro Limited

4.0
Compare

Shapoorji Pallonji Group

4.1
Compare

Tata Projects

4.2
Compare

Hindustan Construction Company

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview