Add office photos
Filter interviews by
Glastronix Interview Questions and Answers
Glastronix Interview Experiences
6 interviews found
(1 Question)
- Q1. Tool test in Solidworks to draw a Sheetmetal jeep
(1 Question)
- Q1. Material properties and difference between ss304 and 306
- Ans.
SS304 and SS316 are both stainless steel alloys, but with different compositions and properties.
SS304 is composed of 18% chromium and 8% nickel, while SS316 has 16% chromium, 10% nickel, and 2% molybdenum.
SS316 is more corrosion resistant than SS304, especially in chloride environments.
SS316 is often used in marine applications or in environments with high levels of salt or chemicals.
SS304 is more affordable and common...
(1 Question)
- Q1. Introduce yourself
Design & Development Engineer Interview Questions asked at other Companies
(1 Question)
- Q1. Knowledge about material mass, jigs and fictures
Costing Engineer Interview Questions asked at other Companies
(3 Questions)
- Q1. Specific density of mild steel
- Ans.
The specific density of mild steel is approximately 7.85 g/cm³.
Specific density is the ratio of mass to volume of a substance.
Mild steel is a low carbon steel with a density close to that of iron.
The specific density of mild steel can vary slightly depending on the composition and manufacturing process.
The specific density of mild steel is commonly used in engineering calculations and material selection.
- Q2. Specific density of aluminium
- Ans.
The specific density of aluminium is 2.7 g/cm³.
Specific density is the ratio of mass to volume of a substance.
Aluminium has a low density compared to other metals.
The specific density of aluminium is important in engineering applications.
The specific density of aluminium is 2.7 g/cm³ or 2700 kg/m³.
- Q3. Purchase engineer roles
Interview Preparation Tips
Technical material knowledge
Purchase Engineer Interview Questions asked at other Companies
(2 Questions)
- Q1. Specific density of mild steel
- Ans.
The specific density of mild steel is approximately 7.85 g/cm³.
Specific density is the ratio of mass to volume of a substance.
Mild steel is a low carbon steel with a density similar to that of iron.
The specific density of mild steel can vary slightly depending on its composition and manufacturing process.
- Q2. Specific density of aluminium
- Ans.
The specific density of aluminum is 2.7 g/cm³.
Specific density is the ratio of mass to volume of a substance.
Aluminum has a low density compared to other metals.
The specific density of aluminum is important in engineering applications.
The specific density of aluminum is 2.7 g/cm³ or 2700 kg/m³.
Interview Preparation Tips
Develop skills like negotiation, supply chain
And also learn software like AutoCAD CATIA
Purchase Engineer Interview Questions asked at other Companies
Glastronix interview questions for popular designations
(2 Questions)
- Q1. Specific density of aluminium
- Ans.
The specific density of aluminium is 2.7 g/cm³.
Specific density is the ratio of mass to volume of a substance.
Aluminium has a low density compared to other metals.
The specific density of aluminium can vary slightly depending on the alloy used.
The specific density of aluminium is important in engineering applications such as designing aircraft and automobiles.
- Q2. Specific density of mild steel
- Ans.
The specific density of mild steel is approximately 7.85 g/cm³.
Specific density is the ratio of mass to volume of a material.
Mild steel is a low carbon steel with a density similar to that of iron.
The specific density of mild steel can vary slightly depending on the composition and manufacturing process.
The specific density of mild steel is commonly used in engineering calculations and material selection.
Interview Preparation Tips
Material knowledge
Inventory management
Row material Procurement
Lean manufacturing
Purchase Engineer Interview Questions asked at other Companies
I applied via Referral and was interviewed before Mar 2021. There was 1 interview round.
(2 Questions)
- Q1. Mechanical related questions like machines
- Q2. Tool test on softwares
Interview Preparation Tips
Design Engineer Interview Questions asked at other Companies
Top trending discussions
Interview questions from similar companies
I applied via Campus Placement
It was a MCQ test on CS Fundamentals. We have to answer 50 questions in 40 minutes. Accuracy is must. Company have its own cutoff and it's usually high. So try to gain maximum marks as possible. The results were announced in 1.5 hrs. The selected candidates will be appearing for the coding challenge.
There are 5 questions. 1 easy , 3 medium, 1 hard. You should solve atleast 4 questions to get shortlisted for the interview. Results are announced in 2-3 hours. Take a look at these questions. One of the questions from the coding challenge will be asked in the interview.
(5 Questions)
- Q1. Email validation question from coding challenge
- Q2. Binary Search on rotated arrays
- Q3. About projects (reason behind using the mentioned database)
- Q4. Use of package.json file
- Q5. What are scripts in package.json file
Interview Preparation Tips
Selected
I applied via LinkedIn and was interviewed in Dec 2024. There were 2 interview rounds.
General basic assessment.
(1 Question)
- Q1. They will give you few PDFs to read and then MCQ from that.
Interview Preparation Tips
On the starting date you'll again message one person(Yashima Kamra) on Skype, they'll give you 'Zulip'(it's an open source chat system, interface is kind of like Discord but too basic) access. Now you need to message in an assigned group in Zulip. The Zulip part is 'Training' in real but good luck getting any support from the other person. He/she will just give you commands, and if you ask any questions or ask for assistance to understand the new process they'll simply ignore that.
Then if you're lucky like me one day they'll report that you're ate fault, you haven't reported so they've revoked your Zulip access.
I have joined there or you can say hoped to work atleast(as it was 4 hours/day job) but that's not possible it seems.
If you're looking for jobs here I'd suggest to give it a try ofcourse so that people can actually know about this company's rubbish people.
E-Commerce Executive Interview Questions & Answers
Amazon Sellers Services
Anonymous
posted on 3 Jan 2025
Selected
I applied via Naukri.com and was interviewed in Dec 2024. There were 2 interview rounds.
(3 Questions)
- Q1. How to work in Amazon
- Q2. What the salary
- Q3. How to work in e-commerce
(2 Questions)
- Q1. How to work in Amazon
- Q2. What the salary
Interview Preparation Tips
School Teacher Interview Questions & Answers
Mdn Edify Education
SATHVIK VISHAK K
posted on 11 Jan 2025
(1 Question)
- Q1. General discussion
(1 Question)
- Q1. Demo in our specialist subject
(2 Questions)
- Q1. General discussion about ourselves.
- Q2. About work experience
Glastronix Interview FAQs
Tell us how to improve this page.
Glastronix Interviews By Designations
Interview Questions for Popular Designations
Glastronix Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
Glastronix Reviews and Ratings
based on 33 reviews
Rating in categories
|
Design & Development Engineer
20
salaries
|  ₹2.2 L/yr - ₹7.5 L/yr |
|
Design Engineer
19
salaries
| ₹2.5 L/yr - ₹5.4 L/yr |
|
Costing Engineer
10
salaries
| ₹2.8 L/yr - ₹6 L/yr |
|
PPC Engineer
10
salaries
| ₹2.5 L/yr - ₹5.2 L/yr |
|
Quality Engineer
8
salaries
| ₹3 L/yr - ₹3.8 L/yr |
Optiemus Electronics
Sasken
HCLTech
Wipro
- Home >
- Interviews >
- Glastronix Interview Questions
