Future Architectural Glass Quality Engineer Interview Questions and Answers

Q1. Slump test procedure
Ans. 
The slump test is a method to measure the workability of fresh concrete.
• A slump cone is filled with fresh concrete and compacted in three layers

• The cone is then lifted and the amount of slump is measured

• The slump value indicates the consistency of the concrete

• The test is performed in accordance with ASTM C143 or EN 12350-2 standards
Answered by AI
Add your answer
Q2. Types of concrete, materials used for concrete
Ans. 
Concrete is a composite material made up of cement, water, and aggregates.
• Types of concrete include plain, reinforced, pre-stressed, and lightweight.

• Materials used for concrete include cement, water, aggregates (sand, gravel, crushed stone), and admixtures (chemicals added to improve properties).

• Different types of aggregates can be used to achieve different properties, such as strength, durability, and workability.

• Admi...read more
Answered by AI
Add your answer

Q1. Benefits of rmc over site mix
Ans. 
RMC offers better quality, consistency, and efficiency compared to site mix.
• RMC is produced in a controlled environment, ensuring consistent quality.

• It reduces the need for on-site storage of raw materials and equipment.

• RMC reduces the risk of human error and increases efficiency.

• It also reduces the amount of waste generated on-site.

• RMC can be customized to meet specific project requirements.

• Site mix, on the other hand...read more
Answered by AI
Add your answer
Q2. Mix ratios for grade of concrete
Ans. 
Mix ratios for grade of concrete
• Mix ratios for concrete vary depending on the grade of concrete required

• For example, for M20 grade concrete, the mix ratio would be 1:1.5:3 (cement:sand:aggregate)

• Higher grade concrete requires a higher proportion of cement in the mix

• The mix ratio should be carefully calculated to ensure the desired strength and durability of the concrete
Answered by AI
Add your answer

Social issues, need for rmc, work culture, salary negotiations

Q1. Concrete mix design and process
Add your answer
Q2. Durability & Chemistry behind concrete, cement, ggbs & steel
Ans. 
Durability of concrete is influenced by the chemistry of its components like cement, ggbs, and steel.
• Concrete durability is affected by factors like water-cement ratio, curing methods, and quality of ingredients.

• Cement provides the binding properties in concrete and its composition affects the strength and durability.

• Ground Granulated Blast Furnace Slag (GGBS) is a byproduct of steel production and can enhance the dura...read more
Answered by AI
Add your answer

Q1. What motivates you to join in JSW Group
Ans. 
I am motivated to join JSW Group because of their strong reputation in the industry, opportunities for growth and development, and their commitment to quality and innovation.
• Strong reputation in the industry

• Opportunities for growth and development

• Commitment to quality and innovation
Answered by AI
Add your answer
Q2. What are the achievements & difficult situations you have handled in previous role
Ans. 
In my previous role, I successfully implemented a new quality control system resulting in a 20% reduction in defects.
• Implemented a new quality control system

• Achieved a 20% reduction in defects

• Handled difficult situations by conducting root cause analysis and implementing corrective actions
Answered by AI
Add your answer

Online aptitude test

Q1. Tell me about yourself.
Ans. I am an energetic person, an effective communicator, and a quick learner.a great deal of technical exposure along with the importance of working in a team and the value of client satisfaction.
Answered Anonymously
Add your answer
Q2. Why do you want to work for our company?
Ans. I feel that with my current skill sets and my experience job requirements this role presented are a perfect match for me. I could visualize myself in that role as it aligned with my career aspirations, skills, and expertise. Besides, I have researched your company and found that it has impressive and promising projections which made me excited to be a part of the amazing future. I would take pride in working under the ...read more
Answered Anonymously
Add your answer

Q1. What is a slump cone
Ans. 
A slump cone is a tool used in construction to measure the consistency of fresh concrete.
• A slump cone is a funnel-shaped device made of metal or plastic.

• It is filled with freshly mixed concrete and then lifted vertically to see how much the concrete slumps or settles.

• The amount of slump indicates the consistency of the concrete mix.

• Different types of slumps (true slump, shear slump, collapse slump) can indicate differe...read more
Answered by AI
View 1 more answer
Q2. What is a quebe test
Ans. 
A quebe test is a quality control test used to determine the presence of specific substances or characteristics in a sample.
• Quebe tests are commonly used in industries such as pharmaceuticals, food and beverage, and environmental testing.

• Examples of quebe tests include pH testing, microbial testing, and chemical analysis.

• The results of a quebe test help ensure that products meet quality standards and regulatory require
Answered by AI
Add your answer
Q3. The quebe test is square Ready Mix Concrete Strenth K. N. meter
Add your answer

Q1. What is the quality
Ans. 
Quality is the measure of excellence or superiority of a product or service.
• Quality is meeting or exceeding customer expectations

• It involves consistency, reliability, and durability

• Quality can be measured through various metrics such as defect rates, customer satisfaction, and compliance with standards
Answered by AI
View 1 more answer
Q2. What is tha testing for lab
Ans. 
Testing for lab involves conducting various experiments and analyses to ensure the quality and accuracy of products or processes.
• Testing involves following specific procedures and protocols to collect data and analyze results.

• Different types of tests may be conducted depending on the purpose, such as chemical analysis, microbiological testing, or physical testing.

• Quality control testing is essential to identify any def...read more
Answered by AI
Add your answer
Q3. What is tha testing for lab technicianin this plan
Add your answer

Personal behaviour and English vocabulary

Q1. Core working area
Add your answer
Q2. Practical experience
Add your answer
Q3. Management skills
Add your answer

Q1. Only salary negotiation and HR questions
Add your answer

Q1. What is QMS System
Ans. 
QMS System stands for Quality Management System, which is a set of policies, processes, and procedures required for planning and execution in the core business area of an organization.
• QMS System helps in ensuring that products and services meet customer requirements and regulatory standards

• It includes documentation, training, audits, corrective actions, and continuous improvement processes

• Examples of QMS Systems includ
Answered by AI
Add your answer
Q2. What is your privious Experience
Add your answer
Q3. What do you know about Plastic Testing
Ans. 
Plastic testing involves evaluating the physical, mechanical, and chemical properties of plastic materials to ensure quality and safety.
• Plastic testing includes tests for strength, flexibility, impact resistance, and thermal properties.

• Common testing methods for plastics include tensile testing, impact testing, hardness testing, and thermal analysis.

• Chemical testing is also important to assess the stability and compati...read more
Answered by AI
Add your answer
Q4. What is in process Inspection
Ans. 
In process inspection is the examination or measurement of work in progress to ensure it meets quality standards.
• In process inspection involves checking products or components at various stages of production

• It helps identify and correct any issues early on to prevent defects in the final product

• Examples include measuring dimensions of a part during machining or visually inspecting welds during fabrication
Answered by AI
Add your answer
Q5. How to Handle Customer Complaint
Ans. 
Handle customer complaints by listening, empathizing, investigating, resolving, and following up.
• Listen actively to the customer's complaint without interrupting.

• Empathize with the customer's situation and show understanding.

• Investigate the root cause of the complaint to prevent future occurrences.

• Resolve the issue by offering a solution or compensation if necessary.

• Follow up with the customer to ensure their satisfact
Answered by AI
Add your answer
Q6. How to control Global Rejection
Ans. 
Global rejection can be controlled by implementing robust quality control measures, continuous monitoring, and proactive problem-solving strategies.
• Implement robust quality control measures to identify and address potential issues early on

• Establish clear quality standards and guidelines for all processes

• Utilize data analysis and statistical tools to track rejection rates and identify trends

• Implement corrective and prev...read more
Answered by AI
Add your answer

Q1. Some technical questions
Add your answer

Q1. Some discussions for previous company's
Add your answer