Filter interviews by
I applied via Campus Placement and was interviewed in Jun 2021. There were 4 interview rounds.
SCR is a semiconductor device used for controlling high power circuits.
SCR stands for Silicon Control Rectifier.
It is a type of thyristor.
It is used for controlling high power circuits.
It has three terminals: anode, cathode, and gate.
It can be turned on by applying a small voltage to the gate terminal.
Once turned on, it will continue to conduct even if the gate voltage is removed.
It is commonly used in power electronic...
Primary and secondary I and V of transformer are related by the turns ratio.
The primary and secondary currents are inversely proportional to their respective turns ratios.
The primary and secondary voltages are directly proportional to their respective turns ratios.
The turns ratio is the ratio of the number of turns in the primary winding to the number of turns in the secondary winding.
The relationship between primary a...
Logic gates are electronic components that perform logical operations on one or more binary inputs.
They are the building blocks of digital circuits.
There are seven basic types of logic gates: AND, OR, NOT, NAND, NOR, XOR, and XNOR.
Logic gates can be combined to create more complex circuits.
They are used in computer processors, calculators, and other digital devices.
Logic gates operate on binary values, where 0 represen
A flip-flop is a digital circuit that can store one bit of information and has two stable states.
It is used in digital electronics to store binary data.
It has two stable states - SET and RESET.
It can be implemented using logic gates like NAND, NOR, etc.
Types of flip-flops include SR flip-flop, D flip-flop, JK flip-flop, and T flip-flop.
Example: A D flip-flop stores one bit of data and has a single input (D) and two out
A bridge rectifier is an electronic circuit that converts AC to DC voltage using diodes arranged in a bridge configuration.
It is used to convert AC voltage to DC voltage.
It consists of four diodes arranged in a bridge configuration.
The output of a bridge rectifier is a pulsating DC voltage.
It is commonly used in power supplies and battery chargers.
The bridge rectifier is more efficient than a half-wave rectifier.
Exampl...
Temperature in the range of 1000°C can be measured using thermocouples or optical pyrometers.
Thermocouples are made of two different metals that generate a voltage proportional to the temperature difference between the two junctions.
Optical pyrometers measure the intensity of the thermal radiation emitted by the object and convert it into temperature.
Both methods require calibration and consideration of environmental f...
Engine testing evaluates performance, efficiency, and emissions to ensure reliability and compliance with standards.
Conduct bench tests to measure power output and torque under various conditions.
Perform durability testing by running the engine for extended periods to assess wear and tear.
Use dynamometers to simulate real-world driving conditions and gather performance data.
Evaluate emissions using specialized equipmen...
I was interviewed in Nov 2024.
Two stroke engines have a power stroke every two strokes, while four stroke engines have a power stroke every four strokes.
Two stroke engines have a simpler design with fewer moving parts.
Four stroke engines are more fuel efficient and produce less pollution.
Examples: Two stroke engines are commonly used in chainsaws and dirt bikes, while four stroke engines are found in cars and motorcycles.
Force Motors interview questions for popular designations
I applied via Naukri.com and was interviewed in Nov 2024. There was 1 interview round.
Get interview-ready with Top Force Motors Interview Questions
I applied via Approached by Company and was interviewed in Oct 2024. There was 1 interview round.
Hydraulic systems use fluid to transmit power and are commonly found in machinery and equipment.
Understand the basic principles of hydraulic systems, including Pascal's Law and how pressure is transmitted through a confined fluid.
Learn how to operate hydraulic equipment safely, including proper use of controls and understanding potential hazards.
Regularly inspect hydraulic systems for leaks, damage, or other issues tha...
Pneumatic systems use compressed air to transmit power, while hydraulic systems use fluid (usually oil) to transmit power.
Pneumatic systems use compressed air as the medium for power transmission.
Hydraulic systems use fluid (usually oil) as the medium for power transmission.
Pneumatic systems are typically used in lighter applications, such as air brakes in vehicles.
Hydraulic systems are used in heavier applications, su...
Four stroke engines have separate intake, compression, power, and exhaust strokes, while two stroke engines combine intake and exhaust in one stroke.
Four stroke engines have valves for intake and exhaust, while two stroke engines use ports
Four stroke engines are more fuel efficient and produce less pollution
Two stroke engines have simpler design and are lighter in weight
Examples: Four stroke - car engines, Two stroke -
Beam loading refers to the distribution of forces and moments acting on a beam.
Beam loading includes both the external loads applied to a beam and the internal reactions within the beam.
Types of beam loading include point loads, distributed loads, and concentrated moments.
Understanding beam loading is crucial for designing beams that can support the expected loads without failing.
Examples of beam loading scenarios incl...
A force diagram is a visual representation of the forces acting on an object.
Identify all the forces acting on the object
Draw arrows to represent the direction and magnitude of each force
Label each force with its name and value
Ensure that the forces are balanced if the object is in equilibrium
I applied via Naukri.com and was interviewed in Mar 2024. There were 3 interview rounds.
Mechanics
Som
Tom
Dom
Turbo
Fluid
Material
Material property ion carbon diagram is a graphical representation of the relationship between material properties and carbon content.
Material property ion carbon diagram shows how material properties change with varying carbon content.
Common material properties include hardness, strength, and ductility.
Examples of materials that exhibit changes in properties with carbon content include steel and cast iron.
The list count of a vernier caliper typically includes the main scale and the vernier scale.
The list count of a vernier caliper is usually 2, consisting of the main scale and the vernier scale.
The main scale is typically graduated in millimeters or inches, while the vernier scale allows for more precise measurements.
The vernier scale has divisions that are slightly smaller than those on the main scale, enabling measure...
I study drawing by practicing regularly, taking classes, studying anatomy, observing real life objects, and seeking feedback from others.
Practice regularly to improve skills and develop a personal style
Take drawing classes to learn new techniques and receive guidance from instructors
Study anatomy to understand the structure of the human body and improve figure drawing
Observe real life objects to improve observational s...
I applied via Recruitment Consulltant and was interviewed in Jan 2024. There were 3 interview rounds.
The material properties of metal used in automobiles include strength, stiffness, ductility, and corrosion resistance.
Strength: Metals used in automobiles need to have high strength to withstand various loads and stresses.
Stiffness: Metals should also have good stiffness to maintain the shape and structure of the vehicle.
Ductility: Some amount of ductility is required to allow for deformation without fracturing.
Corrosi...
The duration of Force Motors interview process can vary, but typically it takes about less than 2 weeks to complete.
based on 103 interviews
Interview experience
based on 1.7k reviews
Rating in categories
Junior Engineer
612
salaries
| ₹0 L/yr - ₹0 L/yr |
Engineer
377
salaries
| ₹0 L/yr - ₹0 L/yr |
Senior Engineer
352
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Engineer
266
salaries
| ₹0 L/yr - ₹0 L/yr |
Assistant Manager
241
salaries
| ₹0 L/yr - ₹0 L/yr |
Tata Motors
Mahindra & Mahindra
Ashok Leyland
Maruti Suzuki