Add office photos
Filter interviews by
First Quantum Minerals Interview Questions, Process, and Tips
Top First Quantum Minerals Interview Questions and Answers
- Q1. Distinguish a near miss and an Accidend and an ancident.asked in Instrumentation Technician interview
- Q2. What would you do as a supervisor inchrge of ensuring government compliance is conplied at all times versus your company demanding you to favour it?asked in Process Supervisor interview
- Q3. What are some of the parameters you look at in a Grinding circuit?asked in Mill Operator interview
First Quantum Minerals Interview Experiences
11 interviews found
Anonymous
General knowledge kind of tests
(2 Questions)
- Q1. Government regulations and policies
- Q2. What would you do as a supervisor inchrge of ensuring government compliance is conplied at all times versus your company demanding you to favour it?
- Ans.
As a supervisor, I would prioritize government compliance over company demands.
Educate and communicate the importance of government compliance to the company
Establish clear policies and procedures for government compliance
Monitor and audit compliance regularly
Address any non-compliance issues promptly and take appropriate actions
Document all compliance efforts and maintain records
Seek legal advice if necessary to ensur...
(6 Questions)
- Q1. What is the core business of an effluent treatment plant?
- Ans.
The core business of an effluent treatment plant is to treat and manage wastewater from industrial processes.
Effluent treatment plants are responsible for removing pollutants and contaminants from wastewater before it is discharged into the environment.
They use various treatment processes such as physical, chemical, and biological methods to treat the wastewater.
Effluent treatment plants ensure compliance with environm...
- Q2. What is the relationship between minerals and acid?
- Ans.
Minerals can react with acid to form salts and release hydrogen gas.
Minerals can undergo chemical reactions with acids.
The reaction between minerals and acid can result in the formation of salts.
Hydrogen gas may be released during the reaction.
The reaction rate can vary depending on the type of mineral and acid involved.
Examples of minerals that react with acid include limestone (calcium carbonate) and dolomite (calciu
- Q3. What do u understand by the term ACID MINE DRAINAGE (AMD)?
- Ans.
ACID MINE DRAINAGE (AMD) refers to the acidic water that is formed when sulfide minerals in rocks are exposed to air and water.
ACID MINE DRAINAGE (AMD) is a major environmental problem in mining areas.
It occurs when sulfide minerals, such as pyrite, are exposed to air and water, leading to the formation of sulfuric acid.
The acidic water can contaminate surface water, groundwater, and soil, causing harm to aquatic life ...
- Q4. How do you deal with such a challenge?
- Ans.
I deal with challenges by analyzing the situation, developing a plan, and effectively communicating with team members.
Analyze the challenge to understand its root cause
Develop a plan of action to address the challenge
Communicate the plan to team members and assign tasks
Monitor progress and provide guidance and support
Regularly evaluate the effectiveness of the plan and make adjustments as needed
- Q5. What would you do if your superior asks you to work under presure and do short cuts in order to beat time on the tasks?
- Ans.
I would prioritize quality and safety over beating time and follow the established processes.
I would communicate with my superior to understand the reasons behind the request and express my concerns about compromising quality and safety.
I would emphasize the importance of following established processes and the potential risks of taking shortcuts.
I would propose alternative solutions to improve efficiency without compr...
- Q6. What would you do to your subordinates potrays very bad attitudes towards work?
- Ans.
As a Process Supervisor, I would address subordinates with bad attitudes by implementing a combination of communication, motivation, and disciplinary actions.
Hold a team meeting to discuss the importance of positive attitudes and the impact it has on productivity and team morale.
Provide clear expectations and goals to each team member, emphasizing the importance of their role in achieving overall success.
Offer incentiv...
Behavioural and safety pinciples.and i worn the interviwers blessings.
Interview Preparation Tips
Process Supervisor Interview Questions asked at other Companies
Selected
I applied via Company Website and was interviewed in Sep 2023. There were 4 interview rounds.
On how to operate the graders during raining season and after season.
Components indication
(1 Question)
- Q1. Oparetional technology
Selected
I applied via Walk-in and was interviewed before Dec 2023. There were 4 interview rounds.
(3 Questions)
- Q1. Tell us more about your self.
- Ans.
I am a dedicated and experienced instrumentation technician with a strong background in troubleshooting and maintaining various types of equipment.
Over 5 years of experience in the field of instrumentation technology
Proficient in reading and interpreting technical drawings and schematics
Skilled in calibrating and repairing instrumentation equipment such as pressure gauges, flow meters, and temperature sensors
Strong kno...
- Q2. Your Salary Expection.
- Ans.
My salary expectation is in line with industry standards and reflects my experience and qualifications.
Research industry standards for Instrumentation Technicians in the area
Consider your level of experience and qualifications
Be prepared to negotiate based on job responsibilities and benefits offered
- Q3. Any thing you would like to ask,
(3 Questions)
- Q1. What is live zero?
- Ans.
Live zero is a term used in instrumentation to refer to a situation where the instrument reads zero when the input signal is zero.
Live zero ensures that the instrument is accurately measuring the input signal without any offset or error.
It is important for ensuring the reliability and accuracy of the instrument readings.
Examples include pressure gauges that should read zero when there is no pressure applied, or tempera...
- Q2. Tell us how you go about your day at your work place.
- Ans.
I start my day by reviewing the schedule, checking equipment, performing maintenance tasks, troubleshooting issues, and documenting work done.
Review the schedule for the day
Check equipment for any issues
Perform maintenance tasks as needed
Troubleshoot any instrumentation issues that arise
Document work done for record keeping
- Q3. In most cased questions are based on the Cv and work sinario.
(4 Questions)
- Q1. What is safety?
- Ans.
Safety is the practice of preventing accidents, injuries, and hazards in the workplace.
Safety involves following proper procedures and protocols to minimize risks
It includes using personal protective equipment (PPE) when necessary
Regular maintenance and inspections of equipment and machinery are essential for safety
Safety also involves proper training and communication among team members
Examples: wearing a hard hat in ...
- Q2. What is a hazard?
- Ans.
A hazard is a potential source of harm or danger that could cause injury, damage, or loss.
A hazard can be a physical condition, activity, or substance that has the potential to cause harm.
Hazards can be classified into categories such as biological, chemical, physical, ergonomic, and psychosocial.
Examples of hazards include slippery floors, toxic chemicals, loud noises, heavy lifting, and workplace stress.
Identifying a...
- Q3. Distinguish a near miss and an Accidend and an ancident.
- Ans.
Near miss is a potential accident that did not result in injury or damage, accident is an unplanned event that results in injury or damage, incident is any event that disrupts normal operations.
Near miss is a close call where an accident almost happened but was avoided.
Accident is an unplanned event that results in injury, damage, or loss.
Incident is any event that disrupts normal operations, regardless of outcome.
Exam...
- Q4. What is a risk?
- Ans.
A risk is the potential of gaining or losing something of value. It involves uncertainty and the possibility of negative outcomes.
Risk is inherent in any decision or action taken.
It involves assessing the likelihood of an event occurring and the potential impact if it does.
Examples include financial risks, safety risks, and health risks.
What you ever worked in the substation? if yes tell us the proceddure and requirments for working in the substation
Interview Preparation Tips
Instrumentation Technician Interview Questions asked at other Companies
I applied via LinkedIn and was interviewed in Apr 2023. There were 4 interview rounds.
Dover test , trying to figure out how you think.
Crew management, not only to hear from your supervisor but together as one goal
Check how you can oparete the machine
First Quantum Minerals interview questions for popular designations
Selected
I applied via Company Website and was interviewed before Mar 2023. There were 3 interview rounds.
(1 Question)
- Q1. Tell us about yourself?
- Ans. Started by mentioning my name, academic qualifications and job experience, also mentioned about my skills and capabilities.
(4 Questions)
- Q1. Explain the grinding circuit at the company you currently working for?
- Ans.
The grinding circuit at my current company consists of a primary crusher, SAG mill, ball mill, and cyclones.
The primary crusher reduces the ore to a manageable size for the SAG mill.
The SAG mill grinds the ore to a finer size using large steel balls.
The ball mill further grinds the ore to achieve the desired particle size.
Cyclones are used to separate the ground ore from the water in the circuit.
The final product is th...
- Q2. What are some of the parameters you look at in a Grinding circuit?
- Ans.
Parameters in a Grinding circuit include particle size distribution, mill power consumption, and circulating load.
Particle size distribution: Ensuring the desired size of particles is achieved through grinding.
Mill power consumption: Monitoring the energy used by the mill to optimize efficiency.
Circulating load: Managing the amount of material circulating within the circuit for proper grinding.
Ore feed rate: Controllin...
- Q3. What challenges did you face or do you face during the grinding process?
- Q4. What is the purpose of grinding?
- Ans.
Grinding is the process of removing material from a workpiece to achieve the desired shape and surface finish.
To remove excess material from a workpiece
To achieve the desired shape and dimensions
To improve surface finish and accuracy
To sharpen cutting tools
Examples: grinding metal parts to precise measurements, sharpening drill bits
(2 Questions)
- Q1. How much salary do you expect?
- Q2. If you are given the opportunity to join us, what is the notice period to your current employer?
Interview Preparation Tips
One day all will be well.
Mill Operator Interview Questions asked at other Companies
I applied via Company Website and was interviewed in Mar 2022. There were 3 interview rounds.
(4 Questions)
- Q1. What are the four principles of Drilling
- Q2. Tell us about your self
- Ans. Steven Mwape are my names, born in 1978,lam male married with 5 children.i did my primary school at Kakema primary school, Junior secondary school at Kabunene Basic school and senior secondary school at Kalumbwa High School.i worked with Safe tech international security company as a security officer,I also worked with Farmers and pit as a Driller and I also worked with FQMO as a Driller, currently I have no employment.
- Q3. Tell us your salary expectations per month
- Ans. Which my fellow Drillers are getting.
- Q4. Tell us hazards which are familiar with Drilling
(3 Questions)
- Q1. What do you think you are the best candidate for the job?
- Ans. I'm the best candidate because of the experience and knowledge that I acquired while working as a Driller
- Q2. What contribution are you going to bring to the organization.
- Q3. Why do you want to work with our company?
- Ans. To revamp production and earn my living
Interview Preparation Tips
- Safety Management System
trevor susa
Selected
I applied via Approached by Company and was interviewed before Jul 2022. There were 5 interview rounds.
6 people from management was in the meeting and the HR
After oral interviews we started writing test
(4 Questions)
- Q1. They started asking about self assessment
- Q2. How do you handle pressure,?
- Q3. Asking about safety and workload procedures
- Q4. Asking about career record of services
(2 Questions)
- Q1. Salary expectations and other benefits
- Q2. How much would you like we offer you?
Pule Everisto
Selected
I applied via Approached by Company and was interviewed before Oct 2022. There were 4 interview rounds.
Dover test passing marks is 80% and above
(5 Questions)
- Q1. Tell us about your self
- Q2. Tell us about your work experience
- Q3. Why do you want to join this company
- Q4. How can you manage pressure at work
- Q5. What impact can you bring to this company once you employed
Demonstrate how to operate a drill rig
Interview Preparation Tips
Driller Interview Questions asked at other Companies
I applied via Recruitment Consultant and was interviewed before Dec 2020. There were 3 interview rounds.
Interview Questionnaire
4 Questions
- Q1. What are four principles of Drilling?
- Q2. Tell us about yourself?
- Q3. Tell us how much your expectations in terms of salary per month
- Q4. Tell us hazards which are familiar with Drilling?
Interview Preparation Tips
I applied via Walk-in and was interviewed before Oct 2020. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. Why do you think you are the best candidate for the job?.
- Q2. What contribution are you going to bring to the organisation.
- Q3. How are you going to balance work and personal responsibilities.
Interview Preparation Tips
Top trending discussions
First Quantum Minerals Interview FAQs
Tell us how to improve this page.
First Quantum Minerals Interviews By Designations
- First Quantum Minerals Driller Interview Questions
- First Quantum Minerals Heavy Duty Mechanic Interview Questions
- First Quantum Minerals Instrumentation Technician Interview Questions
- First Quantum Minerals Mechanical Technician Interview Questions
- First Quantum Minerals Mill Operator Interview Questions
- First Quantum Minerals Process Supervisor Interview Questions
Interview Questions for Popular Designations
First Quantum Minerals Interview Process
based on 6 interviews
Interview experience
Interview Questions from Similar Companies
First Quantum Minerals Reviews and Ratings
based on 100 reviews
Rating in categories
|
Instrumentation Technician
3
salaries
|  ₹0.8 L/yr - ₹3 L/yr |
|
Mechanical Technician
3
salaries
| ₹22.4 L/yr - ₹80 L/yr |
Hindalco Industries
Vedanta Resources
Metso Outotec
Coal India
- Home >
- Interviews >
- First Quantum Minerals Interview Questions
