Filter interviews by
I applied via Walk-in and was interviewed before Dec 2023. There were 4 interview rounds.
I am a dedicated and experienced instrumentation technician with a strong background in troubleshooting and maintaining various types of equipment.
Over 5 years of experience in the field of instrumentation technology
Proficient in reading and interpreting technical drawings and schematics
Skilled in calibrating and repairing instrumentation equipment such as pressure gauges, flow meters, and temperature sensors
Strong kno...
My salary expectation is in line with industry standards and reflects my experience and qualifications.
Research industry standards for Instrumentation Technicians in the area
Consider your level of experience and qualifications
Be prepared to negotiate based on job responsibilities and benefits offered
Live zero is a term used in instrumentation to refer to a situation where the instrument reads zero when the input signal is zero.
Live zero ensures that the instrument is accurately measuring the input signal without any offset or error.
It is important for ensuring the reliability and accuracy of the instrument readings.
Examples include pressure gauges that should read zero when there is no pressure applied, or tempera...
I start my day by reviewing the schedule, checking equipment, performing maintenance tasks, troubleshooting issues, and documenting work done.
Review the schedule for the day
Check equipment for any issues
Perform maintenance tasks as needed
Troubleshoot any instrumentation issues that arise
Document work done for record keeping
Safety is the practice of preventing accidents, injuries, and hazards in the workplace.
Safety involves following proper procedures and protocols to minimize risks
It includes using personal protective equipment (PPE) when necessary
Regular maintenance and inspections of equipment and machinery are essential for safety
Safety also involves proper training and communication among team members
Examples: wearing a hard hat in ...
A hazard is a potential source of harm or danger that could cause injury, damage, or loss.
A hazard can be a physical condition, activity, or substance that has the potential to cause harm.
Hazards can be classified into categories such as biological, chemical, physical, ergonomic, and psychosocial.
Examples of hazards include slippery floors, toxic chemicals, loud noises, heavy lifting, and workplace stress.
Identifying a...
Near miss is a potential accident that did not result in injury or damage, accident is an unplanned event that results in injury or damage, incident is any event that disrupts normal operations.
Near miss is a close call where an accident almost happened but was avoided.
Accident is an unplanned event that results in injury, damage, or loss.
Incident is any event that disrupts normal operations, regardless of outcome.
Exam...
A risk is the potential of gaining or losing something of value. It involves uncertainty and the possibility of negative outcomes.
Risk is inherent in any decision or action taken.
It involves assessing the likelihood of an event occurring and the potential impact if it does.
Examples include financial risks, safety risks, and health risks.
What you ever worked in the substation? if yes tell us the proceddure and requirments for working in the substation
posted on 28 Jun 2022
I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.
Always start first and be crisp and interactive and stick to the topic
I applied via Walk-in and was interviewed before Apr 2020. There was 1 interview round.
A transformer is an electrical device that transfers electrical energy from one circuit to another through electromagnetic induction.
Transformers are used to increase or decrease the voltage of an alternating current (AC) power supply.
They consist of two coils of wire, known as the primary and secondary coils, which are wrapped around a magnetic core.
When an AC voltage is applied to the primary coil, it creates a magne...
The type of breaker used depends on the electrical load and the circuit requirements.
The most common types of breakers are standard, AFCI, GFCI, and dual-function.
Standard breakers are used for general-purpose circuits.
AFCI breakers are used for circuits that power bedrooms and living rooms.
GFCI breakers are used for circuits that power bathrooms, kitchens, and outdoor areas.
Dual-function breakers combine AFCI and GFCI...
Conductors are materials that allow electricity to flow through them. There are different types of conductors used in electrical systems.
Copper is the most commonly used conductor in electrical wiring
Aluminum is also used as a conductor, especially in high voltage power transmission
Silver is the best conductor, but it is too expensive for most applications
Gold is also a good conductor, but it is even more expensive tha...
MCB is a miniature circuit breaker while MCCB is a molded case circuit breaker.
MCB is used for low current applications while MCCB is used for high current applications.
MCB is rated up to 100 amps while MCCB can be rated up to 2500 amps.
MCCB has adjustable trip settings while MCB does not.
MCCB is more expensive than MCB.
Examples of MCB brands include Legrand and Schneider while examples of MCCB brands include Siemens a
I applied via Campus Placement and was interviewed before Sep 2021. There were 2 interview rounds.
G.k,maths,english helth, wait, hight
I applied via Walk-in and was interviewed in Jun 2024. There was 1 interview round.
posted on 13 Jan 2022
I was interviewed in Dec 2021.
MGND stands for Main Ground. It refers to the primary grounding point in an electrical system.
MGND is the main grounding point in an electrical system.
It is typically connected to the earth ground to provide a safe path for electrical current to flow in case of a fault.
MGND helps protect equipment and personnel from electrical shocks.
It is an essential component in ensuring electrical safety and proper functioning of t
Grounding negative in inverters helps in reducing electromagnetic interference (EMI) and noise.
Grounding negative in inverters helps in reducing EMI and noise.
It also helps in improving the efficiency of the inverter.
Grounding negative is done to provide a reference point for the inverter's output voltage.
It also helps in protecting the inverter from voltage spikes and surges.
Examples of inverters that use negative gro...
I applied via Company Website
Coordinate with site teams to ensure smooth operation of site activities.
Regular communication with site teams to understand their needs and challenges
Provide necessary support and resources to site teams
Address any issues or conflicts that may arise among site teams
Ensure all site activities are aligned with project timelines and goals
I was interviewed before Sep 2022.
Production is the process of creating goods and services using resources like labor, machinery, and materials.
Production involves converting raw materials into finished products.
It includes activities such as manufacturing, assembling, packaging, and quality control.
Efficient production processes can lead to cost savings and increased output.
Examples of production include car manufacturing, food processing, and clothin
Production efficiency can be determined by analyzing production output, minimizing waste, optimizing processes, and utilizing resources effectively.
Analyze production output to ensure it meets targets and quality standards
Minimize waste by implementing lean manufacturing principles
Optimize processes by identifying bottlenecks and inefficiencies
Utilize resources effectively by managing inventory levels and production sc
5S is a methodology for organizing a workplace to improve efficiency and effectiveness by maintaining cleanliness and organization.
Sort - separate necessary items from unnecessary ones
Set in order - arrange necessary items in a logical and efficient manner
Shine - clean and inspect the work area regularly
Standardize - establish guidelines and procedures for maintaining the first 3 S's
Sustain - ensure the 5S system is co...
All type crusher equipment sarvice
All type crusher equipment sarvice
There are various types of crushers and plants used in industries for crushing and processing materials.
Types of crushers include jaw crushers, cone crushers, impact crushers, and gyratory crushers.
Plants used for crushing and processing materials include stationary plants, portable plants, and mobile plants.
Crushers and plants are used in industries such as mining, construction, and recycling.
Tools are classified into hand tools, power tools, cutting tools, measuring tools, and torque wrenches are used to apply a specific amount of torque to a fastener.
Hand tools include hammers, screwdrivers, pliers, wrenches, etc.
Power tools include drills, saws, sanders, grinders, etc.
Cutting tools include scissors, knives, shears, etc.
Measuring tools include rulers, tape measures, calipers, etc.
Torque wrenches are used ...
Washers are thin plates with a hole in the center used to distribute load and prevent damage to surfaces.
Flat washers: used to distribute load and prevent damage to surfaces
Lock washers: used to prevent nuts and bolts from loosening
Spring washers: used to absorb shock and vibration
Belleville washers: used to compensate for thermal expansion or contraction
Wave washers: used to provide flexibility and prevent loosening
C-
Spanners are tools used to tighten or loosen nuts and bolts. There are various types of spanners available for different purposes.
Open-end spanner
Ring spanner
Combination spanner
Adjustable spanner
Pipe wrench
Socket wrench
Torque wrench
posted on 21 Dec 2023
I applied via Company Website and was interviewed in Nov 2023. There were 2 interview rounds.
based on 2 interviews
Interview experience
based on 4 reviews
Rating in categories
Instrumentation Technician
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Mechanical Technician
3
salaries
| ₹0 L/yr - ₹0 L/yr |
Hindalco Industries
Vedanta Resources
Metso
Adani Enterprises