Engineers India Site Engineer Interview Questions and Answers

Q1. What is the main components part of cement?
Ans. 
The main components of cement are limestone, clay, and gypsum.
• Limestone: primary raw material used in cement production

• Clay: provides silica, alumina, and iron oxide necessary for cement

• Gypsum: regulates setting time and helps control the rate of hardening
Answered by AI
Add your answer
Q2. What is the maximum percentage (%) of carbon and silicon using in cement?
Ans. 
The maximum percentage of carbon and silicon in cement is typically around 5% and 3% respectively.
• Maximum percentage of carbon in cement is around 5%

• Maximum percentage of silicon in cement is around 3%

• Higher percentages can affect the quality and properties of the cement
Answered by AI
Add your answer

General aptitude test

Q1. Thermodynamics and heat mass transfer subject
Add your answer

Q1. Subject-thermodynmics
Add your answer

Q1. Previous working experience detailed. Documents verification
Add your answer

Q1. What is concrete Temperature
Ans. 
Concrete temperature refers to the temperature of freshly mixed concrete.
• Concrete temperature affects the setting time and strength development of concrete.

• It is important to control the temperature of concrete during mixing, transportation, and placement.

• High temperatures can accelerate the setting time and reduce workability, while low temperatures can slow down setting and strength gain.

• Concrete temperature is typic...read more
Answered by AI
View 1 more answer
Q2. Precocious of water structure joint
Ans. 
Precocious of water structure joint refers to the ability of a joint to withstand water pressure and prevent leakage.
• Water structure joints should be designed and constructed to be watertight.

• Various types of joints can be used in water structures, such as expansion joints, construction joints, and control joints.

• Proper sealing materials and techniques should be employed to ensure the integrity of the joints.

• Regular in...read more
Answered by AI
View 1 more answer
Q3. Cube test results in 7 days & 28 days
Ans. 
Cube test results are used to determine the compressive strength of concrete at 7 and 28 days.
• Cube test involves casting cubes of concrete and testing them under compression

• Results are reported in terms of compressive strength in MPa or psi

• 7-day results are used to determine early strength and 28-day results are used to determine ultimate strength

• Concrete with a compressive strength of at least 20 MPa is considered sui
Answered by AI
Add your answer
Q4. 7 days Results 65% & 28 days Results 99.99%
Add your answer

Q1. I was asked to make a presentation on laser technology.
Add your answer

Knowledge of the English language, its vocabulary and comprehension. Ability to solve basic mathematical problem, which shows the capacity to use an analytical approach to everyday puzzles.

My GD topic was renewable energy.

Q1. Tell me about yourself
Ans. 
I am a Senior Engineer with 10+ years of experience in designing and implementing complex systems.
• 10+ years of experience in engineering

• Specialize in designing and implementing complex systems

• Strong problem-solving skills

• Experience with various programming languages such as Java, Python, and C++
Answered by AI
Add your answer
Q2. Why do you want to leave your previous company and join GAIL
Ans. 
Seeking new challenges and growth opportunities at GAIL.
• Desire for new challenges and opportunities for growth

• Interested in working in a different industry or with different technologies

• Attracted to GAIL's reputation and projects

• Seeking a more collaborative and innovative work environment
Answered by AI
Add your answer
Q3. What do your parents do
Ans. 
My parents are both retired now, but my father used to work as a civil engineer and my mother was a teacher.
• Father worked as a civil engineer

• Mother was a teacher

• Both are retired now
Answered by AI
Add your answer
Q4. Have you ever visited Delhi earlier
Ans. 
Yes, I have visited Delhi earlier for a business trip.
• Visited Delhi for a business trip

• Explored historical sites like Red Fort and Qutub Minar

• Enjoyed local cuisine like butter chicken and chaat
Answered by AI
Add your answer
Q5. How did you reach Noida for interview
Add your answer
Q6. Where are you staying in Noida for interview process
Ans. 
I am staying at a hotel in Sector 18, Noida for the interview process.
• Staying at a hotel in Sector 18, Noida

• Close to the interview location

• Comfortable accommodation for the duration of the process
Answered by AI
Add your answer
Q7. Related family background
Add your answer

Q1. Detailed technical questions about bearing, pump, furnace tubes (1st and 2nd pass)MOC, TLE MOC, heat exchanger tube MOC, TEMA codes and classification etc.
Add your answer
Q2. Decoking process of cracking furnace, Naphtha circuit of furnace with sketches,
Ans. 
Decoking process involves removing coke deposits from cracking furnace and naphtha circuit to maintain efficiency.
• Decoking process involves burning off coke deposits using controlled combustion.

• Mechanical decoking involves using high-pressure water jets to remove coke deposits.

• Chemical decoking involves using solvents or acids to dissolve coke deposits.

• Regular decoking is essential to prevent blockages and maintain fur
Answered by AI
Add your answer
Q3. Detailed refrigeration cycles
Ans. 
Refrigeration cycles are thermodynamic processes used in refrigerators and air conditioners to transfer heat from a low temperature reservoir to a high temperature reservoir.
• Refrigeration cycles typically involve four main components: compressor, condenser, expansion valve, and evaporator.

• The refrigerant undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the space being coole...read more
Answered by AI
Add your answer
Q4. Safety related questions which I couldn't answer well
Add your answer
Q5. Safety procedures before starting of hot job
Ans. 
Safety procedures before starting a hot job include obtaining a hot work permit, conducting a hazard assessment, ensuring proper ventilation, and having fire extinguishing equipment nearby.
• Obtain a hot work permit before starting any hot job

• Conduct a hazard assessment to identify potential risks

• Ensure proper ventilation in the work area to prevent buildup of flammable gases

• Have fire extinguishing equipment nearby and r
Answered by AI
Add your answer
Q6. Furnace tubes Welding related questions
Add your answer
Q7. Scaffolding and insulation related general questions (easy)
Add your answer

Q1. How will you identify if a pump is cavitating while working on a DCS panel?
Ans. 
To identify if a pump is cavitating while working on a DCS panel, you can look for certain indicators.
• Monitor the pump's suction pressure. If it is fluctuating or dropping below the specified range, it may indicate cavitation.

• Check the pump's discharge pressure. If it is higher than normal, it could be a sign of cavitation.

• Listen for unusual noises such as a rattling or grinding sound coming from the pump.

• Inspect the p...read more
Answered by AI
View 2 more answers
Q2. How would you prepare a hydrocarbon vessel for vessel entry?
Ans. 
To prepare a hydrocarbon vessel for vessel entry, follow these steps:
• Ensure the vessel is properly isolated from the process and all sources of energy

• Ventilate the vessel to remove any flammable or toxic gases

• Perform a thorough inspection of the vessel for any signs of leaks or damage

• Implement proper lockout/tagout procedures to prevent accidental activation of equipment

• Provide appropriate personal protective equipment...read more
Answered by AI
View 2 more answers