Edge Pharma Interview Questions and Answers

Q1. Could you explain the schematic flow of a purified water system?
Ans. 
A purified water system typically consists of multiple stages to remove impurities and ensure water quality.
• The water first goes through a pre-treatment stage to remove large particles and debris.

• Next, the water is passed through a series of filters to remove smaller particles and impurities.

• After filtration, the water may undergo processes such as reverse osmosis or distillation to further purify it.

• Finally, the purif...read more
Answered by AI
Add your answer
Q2. What is the procedure for calibrating the RPM indicator?
Ans. 
The procedure for calibrating the RPM indicator involves adjusting the settings to ensure accurate readings.
• Ensure the RPM indicator is connected to a stable power source.

• Use a known standard RPM value to compare the indicator readings.

• Adjust the calibration settings on the indicator until it matches the standard value.

• Repeat the process if necessary to achieve accurate calibration.

• Document the calibration process for
Answered by AI
Add your answer

Q1. Can you tell me about yourself?
Ans. 
Experienced engineering professional with a background in QA and management roles.
• Over 8 years of experience in engineering QA

• Managed a team of QA engineers at previous company

• Strong background in software testing methodologies

• Certified in Agile and Scrum practices

• Passionate about continuous improvement and quality assurance
Answered by AI
Add your answer
Q2. What is the current strength of the team you are managing, and how do you manage them?
Ans. 
I currently manage a team of 10 engineers in the QA department. I utilize a combination of leadership, communication, and technical skills to effectively manage the team.
• Regularly communicate with team members to understand their needs and challenges

• Provide guidance and support to help team members achieve their goals

• Set clear expectations and goals for the team

• Delegate tasks effectively based on team members' strength...read more
Answered by AI
Add your answer

Good and not that much difficult

Q1. Good, interview was gone very smooth and you should know about what you mentioned in resume
Add your answer

Q1. They will ask about personal information and inform you about your role
Add your answer

Q1. Types of solvents Toluene, methanol,ethanol etc
Ans. 
Solvents are substances that dissolve other substances to form a solution.
• Toluene is commonly used as a solvent in paint thinners and nail polish removers.

• Methanol is used as a solvent in the production of formaldehyde and as a fuel for vehicles.

• Ethanol is used as a solvent in the production of perfumes, medicines, and personal care products.

• Other types of solvents include acetone, chloroform, and hexane.
Answered by AI
Add your answer
Q2. Types of dryer Rotary dryer Spray dryer Heat pump dryer Fluidzed bed dryer
Ans. 
There are four types of dryers: rotary, spray, heat pump, and fluidized bed.
• Rotary dryer uses a rotating drum to dry materials.

• Spray dryer uses hot gas to evaporate moisture from a liquid.

• Heat pump dryer uses a heat pump to remove moisture from the air.

• Fluidized bed dryer uses hot air to suspend and dry particles in a fluidized bed.
Answered by AI
Add your answer
Q3. What is the expansion of PH Potential hydrogen
Ans. 
PH stands for Potential Hydrogen.
• PH is a measure of acidity or alkalinity of a solution.

• It is measured on a scale of 0 to 14, with 7 being neutral.

• A PH below 7 indicates acidity, while above 7 indicates alkalinity.

• PH is important in various fields such as chemistry, biology, and environmental science.
Answered by AI
Add your answer

Q1. Shop floor activities in Production, From Dispensing to packing
Ans. 
Shop floor activities in production involve dispensing, manufacturing, packaging, and quality control.
• Dispensing of raw materials

• Manufacturing of products

• Packaging of finished goods

• Quality control checks throughout the process

• Cleaning and maintenance of equipment

• Documentation of all activities

• Training of personnel

• Adherence to safety protocols
Answered by AI
Add your answer
Q2. Line clearance details, End point in granulation, critical points in RMG.
Add your answer
Q3. Compression machine parameters , and defects identify
Ans. 
Compression machine parameters and defects identification
• Compression machine parameters include force, speed, and displacement

• Defects can be identified through visual inspection and testing

• Common defects include cracks, voids, and delamination

• Testing methods include ultrasonic testing and dye penetrant inspection
Answered by AI
Add your answer

Q1. What are your salary expectations?
Add your answer
Q2. What is your family background?
Add your answer
Q3. Share details of your previous job.
Add your answer
Q4. Why should we hire you?
Add your answer
Q5. Why are you looking for a change?
Add your answer
Q6. What are your strengths and weaknesses?
Add your answer
Q7. Tell me about yourself.
Add your answer

Q1. Mechanical related questions
Add your answer
Q2. Biopharma industry used utilities
Add your answer

Q1. Sterilization, parental dosage forms, gmp,gdp,wfi,swfi,line clearance, packaging primary,secondary ,territory, glass bottle and it's type, leakage tests, BET test , particulates test,cip,sip,bmr,mfr,sop,au...read more
Add your answer

Q1. Asking general pharma related question for fresher.
Add your answer
Q2. Tell me about your self Body systems
Add your answer

Q1. Self introduction, IPQA related questions
Add your answer