AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Dilip Buildcon
Compare
Proud winner of ABECA 2025 - AmbitionBox Employee Choice Awards
Filter interviews by
Dilip Buildcon Interview Questions and Answers for Freshers
9 Interview questions
TMT bars typically range from 6mm to 40mm in diameter.
TMT bars come in various diameters, commonly ranging from 6mm to 40mm.
The diameter of TMT bars is usually specified by the manufacturer or supplier.
The diameter of TMT bars can vary based on the specific construction requirements.
Material receiving process involves accepting, inspecting, and recording incoming materials for a store.
Accepting deliveries from suppliers
Inspecting materials for quality and quantity
Recording received materials in inventory system
Notifying relevant departments of received materials
Resolving any discrepancies or issues with received materials
I worked at a local grocery store where I assisted customers, managed inventory, and ensured a pleasant shopping experience.
Assisted customers with product inquiries and provided recommendations.
Managed inventory by restocking shelves and organizing products.
Handled cash register operations and processed transactions efficiently.
Maintained cleanliness and organization of the store environment.
Collaborated with tea...
Effective site management involves identifying issues, coordinating solutions, and ensuring smooth operations on construction sites.
Conduct regular site inspections to identify potential problems early, such as safety hazards or material shortages.
Facilitate communication among team members to address issues promptly, like scheduling conflicts or equipment failures.
Implement a problem-solving framework, such as ro...
Risk is the likelihood of harm occurring, while hazards are potential sources of harm.
Risk is the probability of an event happening and the severity of its consequences
Hazards are potential sources of harm that can cause injury, illness, or damage to property
Risk assessment involves identifying hazards and evaluating the likelihood and severity of harm
Examples of hazards include chemicals, machinery, and environme...
Leveling is a process of determining the height of a point relative to a reference point. A leveling machine is used to measure the height difference between two points.
Leveling is used in surveying to determine the elevation of a point relative to a reference point.
A leveling machine, such as a level or a theodolite, is used to measure the height difference between two points.
The height difference is calculated b...
Safety precautions, risk assessment, road signs, ISI marking, barricades, and basic computer knowledge are important for a safety engineer.
Safety precautions are measures taken to prevent accidents or injuries.
Risk assessment is the process of identifying potential hazards and evaluating the likelihood and severity of harm.
Road signs are important for communicating information to drivers and pedestrians.
ISI markin...
There are mainly three grades of cement commonly used in construction: Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), and Portland Slag Cement (PSC.
Ordinary Portland Cement (OPC) is the most commonly used type of cement.
Portland Pozzolana Cement (PPC) is a blend of OPC and pozzolanic materials like fly ash, silica fumes, etc.
Portland Slag Cement (PSC) is a blend of OPC and granulated blast furnac...
Auto level machine is a surveying instrument used to measure height differences.
Auto level machine uses a telescope to measure height differences between two points.
It is commonly used in construction and civil engineering projects.
The machine is set up on a tripod and leveled using the built-in bubble level.
The operator looks through the telescope and adjusts the height until the crosshairs are on the target.
The ...
Dilip Buildcon Interview Experiences for Freshers
21 interviews found
Anonymous
(5 Questions)
- Q1. What is your working experience
- Ans.
I have over 5 years of experience in retail management, including overseeing store operations, managing inventory, and leading a team of employees.
Managed store operations to ensure smooth functioning
Handled inventory management to optimize stock levels
Led a team of employees to achieve sales targets
Implemented strategies to improve customer satisfaction
Trained new staff on company policies and procedures
- Q2. What is MRN, GRN , STN
- Ans.
MRN stands for Material Receipt Note, GRN stands for Goods Receipt Note, and STN stands for Stock Transfer Note.
MRN is a document used to record the receipt of materials from a supplier.
GRN is a document used to record the receipt of goods from a supplier.
STN is a document used to record the transfer of stock from one location to another.
- Q3. What is material receivingprosser
- Ans.
Material receiving process involves accepting, inspecting, and recording incoming materials for a store.
Accepting deliveries from suppliers
Inspecting materials for quality and quantity
Recording received materials in inventory system
Notifying relevant departments of received materials
Resolving any discrepancies or issues with received materials
- Q4. How many grades of cement are there
- Ans.
There are mainly three grades of cement commonly used in construction: Ordinary Portland Cement (OPC), Portland Pozzolana Cement (PPC), and Portland Slag Cement (PSC.
Ordinary Portland Cement (OPC) is the most commonly used type of cement.
Portland Pozzolana Cement (PPC) is a blend of OPC and pozzolanic materials like fly ash, silica fumes, etc.
Portland Slag Cement (PSC) is a blend of OPC and granulated blast furnace sla...
- Q5. How many dia is used in TMT BAR
- Ans.
TMT bars typically range from 6mm to 40mm in diameter.
TMT bars come in various diameters, commonly ranging from 6mm to 40mm.
The diameter of TMT bars is usually specified by the manufacturer or supplier.
The diameter of TMT bars can vary based on the specific construction requirements.
Interview Preparation Tips
Selected
I appeared for an interview in Apr 2025, where I was asked the following questions.
- Q1. General store related question
- Q2. Normal inventory related
Selected
I appeared for an interview in Feb 2025, where I was asked the following questions.
- Q1. Machinery related
- Q2. Mostly grader & Excavator related
Interview Preparation Tips
Selected
I appeared for an interview in Nov 2024.
Survey
Auto Level, Total Stesan, DGPS
Selected
I applied via Walk-in and was interviewed in Apr 2024. There was 1 interview round.
(3 Questions)
- Q1. Introduction and qualifications
- Q2. Technical questions
- Q3. Salary discussion
Interview Preparation Tips
Selected
I appeared for an interview in Sep 2024, where I was asked the following questions.
- Q1. What is NATM?
- Q2. Define rock bolt?
(1 Question)
- Q1. Why do you want to do internship here?
I applied via Walk-in and was interviewed before Jan 2021. There were 4 interview rounds.
Interview Questionnaire
4 Questions
- Q1. Telephone questions road work
- Q2. Telephone questions
- Q3. Telephone questions
- Q4. Telephone questions road work
Interview Preparation Tips
I applied via Walk-in and was interviewed in Aug 2022. There were 3 interview rounds.
(2 Questions)
- Q1. What is a company and how is work
- Q2. What is your father work
- Ans.
My father is a retired teacher.
My father worked as a teacher for over 30 years.
He taught English and Social Studies to high school students.
He was known for his engaging teaching style and dedication to his students.
After retiring, he enjoys spending time with his grandchildren and traveling.
(3 Questions)
- Q1. What your qualification
- Ans.
I have a diploma in mechanical engineering and completed a vocational training program in tool making.
Diploma in mechanical engineering
Completed vocational training program in tool making
Experience in operating various types of tools and machinery
Knowledge of CAD/CAM software
Ability to read technical drawings and blueprints
- Q2. What what is your skills
- Ans.
I have experience in operating various tools and machinery, with a strong focus on precision and safety.
Proficient in using hand and power tools
Skilled in reading and interpreting technical drawings and blueprints
Knowledgeable in maintaining and troubleshooting equipment
Adherence to safety protocols and regulations
Attention to detail and precision in work
- Q3. Why are join in this field
- Ans.
I am passionate about precision engineering and enjoy working with machines.
I have always been fascinated by how machines work and how they can be used to create intricate designs.
I enjoy the challenge of programming and operating machines to produce high-quality parts.
I take pride in my work and strive to continuously improve my skills and knowledge in this field.
I am excited about the opportunities for growth and adv...
Interview Preparation Tips
- Innovative
Selected
I appeared for an interview in Apr 2023, where I was asked the following questions.
- Q1. Store Inventory Related Questions...... Steel Reconciliation Material incoming & Out coming Housekeeping, Material Tagging Steel Manuel Receive Formula
- Q2. Cement Bag Stacking & Used Formula Self life items receiving and Used Formula
- Q3. Material Indent & Receiving Formula
Top trending discussions
Dilip Buildcon Interview FAQs
Some of the top questions asked at the Dilip Buildcon interview for freshers -
The duration of Dilip Buildcon interview process can vary, but typically it takes about less than 2 weeks to complete.
Tell us how to improve this page.
Dilip Buildcon Interviews By Designations
- Dilip Buildcon Highway Engineer Interview Questions
- Dilip Buildcon Store Executive Interview Questions
- Dilip Buildcon Senior Engineer Interview Questions
- Dilip Buildcon Asst Store Interview Questions
- Dilip Buildcon Mechanical Engineer Interview Questions
- Dilip Buildcon Surveyor Interview Questions
- Dilip Buildcon Structural Engineer Interview Questions
- Dilip Buildcon Assistant Manager Interview Questions
- Show more
Interview Questions for Popular Designations
Overall Interview Experience Rating
based on 9 interview experiences
Difficulty level
Duration
Interview Questions from Similar Companies
Dilip Buildcon Reviews and Ratings
based on 2.7k reviews
Rating in categories
Bhanupali-bilaspur
3-8 Yrs
₹ 5-10 LPA
|
Senior Engineer
217
salaries
|  ₹4 L/yr - ₹10.9 L/yr |
|
Asst Store
202
salaries
| ₹1.6 L/yr - ₹4.2 L/yr |
|
Assistant Manager
199
salaries
| ₹4.7 L/yr - ₹11 L/yr |
|
Engineer
188
salaries
| ₹3.5 L/yr - ₹7.5 L/yr |
|
Store Executive
188
salaries
| ₹2.2 L/yr - ₹5.1 L/yr |
Larsen & Toubro Limited
L&T Construction
Tata Projects
Megha Engineering & Infrastructures
- Home >
- Interviews >
- Dilip Buildcon Interview Questions >
- Dilip Buildcon Interview Questions for Fresher
