Add office photos
Filter interviews by
Dheya Engineering Technologies CAE Engineer Interview Questions, Process, and Tips
Dheya Engineering Technologies CAE Engineer Interview Experiences
1 interview found
Anonymous
I applied via Referral and was interviewed before Oct 2021. There was 1 interview round.
(5 Questions)
- Q1. What is stress, poisons ratio, endurance limit?
- Ans.
Stress is the force per unit area, Poisson's ratio is the ratio of lateral to axial strain, and endurance limit is the maximum stress a material can withstand without breaking after a certain number of cycles.
Stress is the measure of the internal forces acting within a material, which can cause deformation or failure.
Poisson's ratio is a measure of a material's ability to deform in response to an applied force, and is ...
- Q2. How does stiffness vary and what are the factors affecting it?
- Ans.
Stiffness varies with material, geometry, and loading conditions.
Stiffness is the ability of a material to resist deformation under load.
Materials with higher Young's modulus have higher stiffness.
Stiffness also depends on the geometry of the structure.
For example, a thicker beam will be stiffer than a thinner beam.
Loading conditions such as the magnitude and direction of the load also affect stiffness.
For instance, a ...
- Q3. How to determine deflection of a material/component?
- Ans.
Deflection of a material/component can be determined by analyzing its stress and strain under a load.
Calculate the stress and strain of the material/component
Use the material's Young's modulus to determine its stiffness
Apply the load and calculate the resulting deflection using the stiffness and stress/strain
Consider any external factors that may affect the deflection, such as temperature or moisture
Use simulation soft...
- Q4. What is young's modulus of steel?
- Ans.
Young's modulus of steel is around 200 GPa.
Young's modulus is a measure of the stiffness of a material.
It is defined as the ratio of stress to strain within the elastic limit.
Steel has a high Young's modulus, making it a strong and rigid material.
The value of Young's modulus for steel can vary depending on the specific type and grade of steel.
For example, the Young's modulus of mild steel is around 200 GPa, while for h
- Q5. 2 different materials with same cross section are taken. Equal tensile forces are applied to each of them. Which one will deflect more?
- Ans.
The material with lower Young's modulus will deflect more.
Young's modulus determines the stiffness of a material.
The material with lower Young's modulus will have more deflection under the same force.
For example, rubber has a lower Young's modulus than steel and will deflect more under the same force.
Interview Preparation Tips
- Vibration
- strength of materials
- Heat Transfer
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Jan 2024. There was 1 interview round.
(3 Questions)
- Q1. How validate your model?
- Ans.
To validate a CAE model, various methods can be used such as comparing simulation results with experimental data, conducting sensitivity analyses, and performing model correlation.
Compare simulation results with experimental data to ensure accuracy
Conduct sensitivity analyses to assess the impact of input parameters on the model
Perform model correlation by comparing predicted behavior with real-world observations
Valida...
- Q2. How define boundary?
- Ans.
Boundary is the limit or edge of a system or object.
Boundary defines the extent or scope of something.
It separates one system or object from another.
Boundaries can be physical, such as walls or fences, or conceptual, such as rules or regulations.
In engineering, boundaries are often defined to specify the limits within which a system or component operates.
For example, in CAE analysis, boundary conditions are set to defi
- Q3. What are parameters you check
- Ans.
Parameters checked by a CAE Engineer
Material properties
Boundary conditions
Mesh quality
Convergence criteria
Simulation results
Interview Preparation Tips
Skills evaluated in this interview
Selected
I applied via Referral and was interviewed before Nov 2023. There was 1 interview round.
(2 Questions)
- Q1. What is fea general equation
- Ans.
The FEA general equation is a mathematical representation used in Finite Element Analysis to solve complex engineering problems.
The FEA general equation relates the stiffness matrix, displacement vector, and force vector in a system of linear equations.
It is used to simulate the behavior of structures under various loading conditions.
The equation is typically solved iteratively using numerical methods like the finite e...
- Q2. What is warpage
- Ans.
Warpage is the deformation or distortion of a material, typically caused by uneven cooling or stress.
Warpage occurs when different parts of a material cool at different rates, causing uneven shrinkage.
It can also be caused by internal stresses within the material.
Warpage is a common issue in plastic injection molding and can lead to dimensional inaccuracies in the final product.
To prevent warpage, proper cooling and st...
Interview Preparation Tips
Selected
I applied via campus placement at Vidya Vardhaka College of Engineering, Mysore and was interviewed in Nov 2024. There were 2 interview rounds.
I am Manohara GC complete my graduation in Vidya vardhaka clg of engineering i know about AutoCAD CATIA and solid edge
"*****" this is mail id please share this link
(5 Questions)
- Q1. What was impact of Accenture?
- Ans.
Accenture has had a significant impact on the design engineering industry, particularly in the areas of technology innovation and digital transformation.
Accenture has helped design engineers leverage advanced technologies such as AI, IoT, and AR/VR to enhance product development processes.
Accenture's expertise in digital transformation has enabled design engineers to streamline operations, improve efficiency, and deliv...
- Q2. May i what to be doing this ur company?
- Ans.
Accenture is a global professional services company that specializes in information technology (IT) services and management consulting. They offer many career paths across different technologies, business areas, and industries.
- Q3. How to build my career?
- Ans.
To build your career as a Design Engineer, focus on gaining relevant education, experience, networking, and continuous learning.
Obtain a degree in engineering or a related field
Gain practical experience through internships or entry-level positions
Build a strong portfolio showcasing your design projects
Network with professionals in the industry and attend design events
Stay updated on the latest design trends and technol
- Q4. How to get the job in your company?
- Ans.
you need to pass Cognitive and Technical assessment. After passing these assessments, you will have to take the Coding Test. After Coding Test, you will have to give communication assessment and then, the Accenture interview round
- Q5. What is main contribute with me?
- Ans.
My main contribution would be my strong design skills and problem-solving abilities.
Strong design skills to create innovative and efficient solutions
Ability to analyze problems and come up with effective design solutions
Experience in using CAD software and other design tools
Collaboration with cross-functional teams to bring designs to life
Interview Preparation Tips
- AutoCAD
- Basic mechanical engineering
- Solid Works
I applied via Walk-in and was interviewed in Dec 2024. There was 1 interview round.
(4 Questions)
- Q1. Introduce yourself
- Q2. Explain your projects
- Q3. Basic hydraulics
- Q4. Materials
(2 Questions)
- Q1. Difference between flip flops and latch
- Q2. Difference between verilog and system verilog
I applied via Naukri.com and was interviewed in Aug 2024. There were 4 interview rounds.
Kindly arrange the aptitude test is Online mode
(3 Questions)
- Q1. Current work load
- Q2. About the company related work
- Q3. About working experience and current working details
(2 Questions)
- Q1. Family background & privious company background
- Q2. Salary & company policy
Metting with top management
(2 Questions)
- Q1. What is bgp protocol
- Q2. What is ospf protocol
(2 Questions)
- Q1. Hello, what is ur name, tell me
- Q2. How are you, tell me abt ur self
Interview Preparation Tips
Selected
I applied via Job Portal and was interviewed in Apr 2024. There were 2 interview rounds.
(1 Question)
- Q1. How much is your expectations?
(1 Question)
- Q1. Why Genpact for your carrier?
Interview Preparation Tips
Dheya Engineering Technologies Interview FAQs
Some of the top questions asked at the Dheya Engineering Technologies CAE Engineer interview -
Tell us how to improve this page.
Interview Questions for Popular Designations
- Design Engineer Interview Questions
- Senior Design Engineer Interview Questions
- R&D Engineer Interview Questions
- Structural Engineer Interview Questions
- Senior CAE Engineer Interview Questions
- Electrical Design Engineer Interview Questions
- Piping Engineer Interview Questions
- CAD Design Engineer Interview Questions
- Show more
People are getting interviews through
Interview Questions from Similar Companies
Dheya Engineering Technologies CAE Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Design Engineer
10
salaries
|  ₹2 L/yr - ₹6.5 L/yr |
|
Senior CAE Engineer
4
salaries
| ₹6 L/yr - ₹6 L/yr |
|
FEA Engineer
4
salaries
| ₹1.8 L/yr - ₹5 L/yr |
|
Lead Cfd Engineer
3
salaries
| ₹7.2 L/yr - ₹10.5 L/yr |
TCS
Infosys
Wipro
Tech Mahindra
Calculate your in-hand salary
- Home >
- Interviews >
- Dheya Engineering Technologies Interview Questions >
- Dheya Engineering Technologies CAE Engineer Interview Questions
