Add office photos
Filter interviews by
Construction Supervisor Engineer Interview Questions and Answers
Construction Supervisor Engineer Interview Experiences
1 interview found
Selected
I applied via Company Website and was interviewed in Aug 2022. There were 3 interview rounds.
I have an affair with civil in 2014
After this I have done a b.tach in 2020
(3 Questions)
- Q1. How much is the ground level How much is the Pilinat level
- Ans.
The ground level refers to the level of the earth's surface, while the Pilinat level is not specified.
The ground level is the reference point for measuring heights and depths.
The Pilinat level could be a specific level within a building or structure.
Without further information, it is not possible to determine the exact Pilinat level.
- Q2. How much is the sill level How much is the lintal level
- Ans.
The sill level and lintel level are measurements used in construction to ensure proper alignment and support of doors and windows.
The sill level refers to the horizontal measurement of the bottom part of a door or window frame.
The lintel level refers to the horizontal measurement of the top part of a door or window frame.
These measurements are important to ensure that doors and windows are properly aligned and supporte...
- Q3. How much is the slab level How much is the Parapit level
- Ans.
The slab level and parapet level are measurements used in construction to determine the height of different structural elements.
The slab level refers to the height of the horizontal slab or floor in a building.
The parapet level refers to the height of the protective wall or barrier at the edge of a roof or balcony.
These measurements are important for ensuring proper alignment and construction of the building.
The slab l...
Interview Preparation Tips
I am fresher
I am like this job
Top trending discussions
Interview questions from similar companies
Selected
I applied via Job Portal and was interviewed in Mar 2024. There was 1 interview round.
(5 Questions)
- Q1. What is Grade of M20
- Ans.
Grade of M20 refers to the mix ratio of concrete where M denotes mix and 20 represents the compressive strength in N/mm^2 after 28 days.
M20 concrete mix consists of 1 part cement, 1.5 parts sand, and 3 parts aggregate.
The compressive strength of M20 concrete after 28 days is 20 N/mm^2.
It is commonly used for residential construction like foundations, slabs, and beams.
- Q2. What is Grade of M25
- Ans.
Grade of M25 refers to the mix design of concrete with a compressive strength of 25 MPa.
M25 grade concrete is a mix design with a compressive strength of 25 MPa after 28 days of curing.
It is commonly used in construction for residential buildings, bridges, and pavements.
The mix proportion for M25 grade concrete is usually 1:1:2 (cement:sand:aggregate).
- Q3. 4.75 to 10 size of sieve
- Ans.
4.75 to 10 size of sieve refers to the range of particle sizes that can pass through the sieve.
4.75 to 10 size of sieve indicates the range of particle sizes that can pass through the sieve mesh.
Particles smaller than 4.75 will pass through, while particles larger than 10 will be retained on the sieve.
This range is commonly used in particle size analysis in industries like construction and mining.
- Q4. What is sinking fund method
- Ans.
Sinking fund method is a way for a company to set aside money over time to repay a debt or replace an asset.
Sinking fund method involves regular contributions to a fund specifically designated for repaying debt or replacing assets.
The purpose of the sinking fund is to ensure that enough money is available when the debt matures or the asset needs to be replaced.
By using the sinking fund method, a company can avoid havin...
- Q5. What is annuity
- Ans.
An annuity is a financial product that provides a series of payments at regular intervals.
Annuities are typically used for retirement income or to provide a steady income stream.
There are different types of annuities such as fixed annuities, variable annuities, and indexed annuities.
Annuities can be purchased with a lump sum payment or through a series of payments over time.
The payments from an annuity can be guarantee...
After the shortlisting of CVs, list was sent for those who were eligible for the OT. The online test included aptitude + technical. There were pretty easy to moderate questions but time was less.
(1 Question)
- Q1. It was the technical round interview. Ours was online. It went up to 50 mins.
(1 Question)
- Q1. The portal will be open for 1 hr and within that time some questions are to be answered by making a video and uploading it.
(1 Question)
- Q1. Questions related to HR
(1 Question)
- Q1. Selected candidates would be asked to visit the mentioned hospital for this round.
(1 Question)
- Q1. Explain about yourself
Selected
I applied via Approached by Company and was interviewed in Oct 2023. There were 3 interview rounds.
(2 Questions)
- Q1. Ask about Career employment History
- Q2. Ask about my self introduction
(2 Questions)
- Q1. Ask about my previous company employment history and work experience briefly
- Q2. Ask about last working project with brief explanation various project structure components
Interview Preparation Tips
Selected
I applied via Referral and was interviewed in Jan 2024. There was 1 interview round.
(1 Question)
- Q1. Lime plant TBD capacity of Tata steel
- Ans.
The capacity of Tata Steel's lime plant is yet to be determined.
The capacity of the lime plant is currently unknown and is still to be decided by Tata Steel.
Tata Steel is likely in the process of determining the optimal capacity for their lime plant.
The capacity of the lime plant will depend on various factors such as production requirements, market demand, and technological capabilities.
Interview Preparation Tips
(1 Question)
- Q1. Concrete and site management
(2 Questions)
- Q1. Describe out your self
- Q2. What is your job responsibilty
(2 Questions)
- Q1. What is your salary expectation
- Q2. Why you change the job
Interview Preparation Tips
Engineer Interview Questions & Answers
Megha Engineering & Infrastructures
Anonymous
posted on 22 Nov 2024
Selected
I applied via Company Website and was interviewed before Nov 2023. There was 1 interview round.
(5 Questions)
- Q1. Previous Company Job Roles & Responsibility.
- Ans.
I was responsible for designing and implementing various engineering projects, managing a team of engineers, and ensuring project deadlines were met.
Designed and implemented engineering projects
Managed a team of engineers
Ensured project deadlines were met
- Q2. Basic Knowledge Of Machineries.
- Q3. How to manage your department as a HOD or In-charge?
- Q4. Schedule Maintenance About Machineries.
- Ans.
Scheduled maintenance of machineries is crucial for ensuring optimal performance and longevity.
Create a maintenance schedule based on manufacturer recommendations
Regularly inspect and clean machineries to prevent breakdowns
Replace worn out parts before they cause major issues
Keep detailed records of maintenance activities for future reference
- Q5. ERP or SAP related knowledge checked by them also.
Interview Preparation Tips
- Machinery Maintenance
- Team Management
sumit tyagi
Selected
I applied via Naukri.com and was interviewed before Mar 2023. There were 2 interview rounds.
(1 Question)
- Q1. Personal family background
(1 Question)
- Q1. Technical questions regarding machine maintenance
Construction Supervisor Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Business Representative Interview Questions
- Paint Shop Engineer Interview Questions
- Billing Incharge Interview Questions
- Assistant Account Executive Interview Questions
- Operations Administrator Interview Questions
- Liaison Manager Interview Questions
- Regional Legal Manager Interview Questions
- Deputy Officer Interview Questions
- Show more
People are getting interviews through
Engineer Interview Questions from Similar Companies
Construction Supervisor Engineer Reviews and Ratings
based on 1 review
Rating in categories
|
Supervisor
25
salaries
|  ₹1.8 L/yr - ₹5 L/yr |
|
Site Supervisor
19
salaries
| ₹1.8 L/yr - ₹4.5 L/yr |
|
Civil Site Engineer
17
salaries
| ₹1.5 L/yr - ₹4.2 L/yr |
|
Supervisor Incharge
7
salaries
| ₹2 L/yr - ₹11.3 L/yr |
|
Construction Engineer
6
salaries
| ₹0.6 L/yr - ₹4.2 L/yr |
Larsen & Toubro Limited
Tata Projects
Shapoorji Pallonji Group
Punj Lloyd
Calculate your in-hand salary
- Home >
- Interviews >
- Construction Supervisor Interview Questions >
- Construction Supervisor Engineer Interview Questions
