Upload Button Icon Add office photos

Filter interviews by

Clear (1)

CIE Automotive Production Associate Interview Questions, Process, and Tips

Updated 20 Jul 2022

CIE Automotive Production Associate Interview Experiences

1 interview found

I applied via Referral and was interviewed in Jan 2022. There was 1 interview round.

Round 1 - HR 

(5 Questions)

  • Q1. What is the difference between 2STROKE AND 4 STROKE ENGINE?
  • Ans. 

    2-stroke engines have a power stroke every revolution, while 4-stroke engines have a power stroke every other revolution.

    • 2-stroke engines are simpler and lighter than 4-stroke engines.

    • 2-stroke engines have a higher power-to-weight ratio than 4-stroke engines.

    • 2-stroke engines require a mixture of oil and fuel, while 4-stroke engines have separate oil and fuel systems.

    • 4-stroke engines are more fuel-efficient and produce ...

  • Answered by AI
  • Q2. What is the least count of vanier caliper?
  • Ans. 

    The least count of a Vernier caliper is typically 0.1 mm or 0.02 mm.

    • The least count is the smallest measurement that can be read on the scale of the caliper.

    • It depends on the design and precision of the caliper.

    • For example, a standard Vernier caliper may have a least count of 0.1 mm, while a digital caliper may have a least count of 0.02 mm.

  • Answered by AI
  • Q3. What is centrifugal pump?
  • Ans. 

    A centrifugal pump is a mechanical device that uses centrifugal force to move fluids through a piping system.

    • It works by converting rotational kinetic energy into hydrodynamic energy.

    • Fluid enters the pump through the center of a rotating impeller and is flung outward by centrifugal force.

    • The fluid then exits the pump through a discharge nozzle.

    • Centrifugal pumps are commonly used in industries such as oil and gas, chemi...

  • Answered by AI
  • Q4. Difference between petrol and diesel engine
  • Ans. 

    Petrol engines use spark ignition while diesel engines use compression ignition.

    • Petrol engines use a spark plug to ignite the fuel-air mixture while diesel engines compress the air to a high temperature and pressure to ignite the fuel.

    • Petrol engines are generally more powerful and responsive while diesel engines are more fuel-efficient and have more torque.

    • Petrol engines are lighter and quieter while diesel engines are...

  • Answered by AI
  • Q5. What is screw gauge?
  • Ans. 

    Screw gauge is a measuring instrument used to measure the diameter of a wire or thickness of a sheet.

    • Also known as micrometer screw gauge

    • Consists of a U-shaped frame with a screw mechanism

    • The screw has a calibrated scale and a thimble for precise measurement

    • Used in industries like manufacturing, engineering, and metalworking

    • Example: Used to measure the thickness of a sheet of metal in a factory

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Guys i suggest you that face your interview confidently

Best of luck

Rate your
company

🤫 100% anonymous

How was your last interview experience?

Share interview

Interview questions from similar companies

I was interviewed in Dec 2016.

Interview Questionnaire 

4 Questions

  • Q1. Difference between a two stroke and a four stroke engine?
  • Ans. 

    A two-stroke engine completes a power cycle in two strokes of the piston, while a four-stroke engine completes it in four strokes.

    • Two-stroke engines have a simpler design and are lighter than four-stroke engines.

    • Two-stroke engines have a higher power-to-weight ratio but lower fuel efficiency compared to four-stroke engines.

    • Four-stroke engines have separate intake, compression, power, and exhaust strokes, while two-stro...

  • Answered by AI
  • Q2. Pictorial representation of a SI engine with valve opening and showing tdc and bdc.
  • Ans. 

    A pictorial representation of a SI engine with valve opening, TDC, and BDC.

    • SI engine stands for Spark Ignition engine, which is commonly used in gasoline-powered vehicles.

    • Valve opening refers to the movement of the intake and exhaust valves to allow fuel-air mixture in and exhaust gases out of the combustion chamber.

    • TDC (Top Dead Center) is the position of the piston at the extreme top of its stroke.

    • BDC (Bottom Dead Ce...

  • Answered by AI
  • Q3. What change will u make or what improvement will you do to any product manufactured by TVS?
  • Ans. 

    I would improve the fuel efficiency of TVS motorcycles by implementing advanced engine technology.

    • Implementing electronic fuel injection system for better fuel management

    • Introducing hybrid technology for improved mileage

    • Optimizing aerodynamics of the motorcycle for reduced drag

    • Using lightweight materials for better fuel economy

  • Answered by AI
  • Q4. Tell me about yourself.
  • Ans. 

    I am a dedicated production engineer with a strong background in manufacturing processes and quality control.

    • Graduated with a degree in Mechanical Engineering

    • Experience working in a manufacturing plant for 3 years

    • Proficient in CAD software for designing production layouts

    • Implemented lean manufacturing principles to improve efficiency

    • Led a team in reducing production downtime by 20%

  • Answered by AI

Interview Preparation Tips

Round: Test
Experience: Basic aptitude questions including a few basic technical questions
Duration: 1 hour
Total Questions: 60

Round: Technical + HR Interview
Experience: Interviewers were friendly, started with a casual talk, about themselves then asking about me, my interests and stuff, then they got into technical stuff followed by few HR questions
Tips: Be free and answer confidently

Skills: Presence Of Mind, Technical Skills, Behavioural Skills
College Name: IIT Madras

I applied via Campus Placement and was interviewed before May 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Tell me about your self?

Interview Preparation Tips

Interview preparation tips for other job seekers - .

I was interviewed in Jul 2017.

Interview Preparation Tips

Skills: Qulity, Quick Maths

I applied via Campus Placement and was interviewed before Aug 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

(1 Question)

  • Q1. Objective type question of 50 marks
Round 3 - Aptitude Test 

20 marks objective questions for aptitude test

Round 4 - One-on-one 

(1 Question)

  • Q1. Question asked according to subject such as Engineering Drawing, Production Process etc.

Interview Preparation Tips

Interview preparation tips for other job seekers - you should prepare answers for the question according to your branch paper. All question were asked from my subject paper of all semester. You must be able to communicate properly with interviewer.

I applied via Recruitment Consultant and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Ash well Ash qualifications according questions asked and experience skill relative questions

Interview Preparation Tips

Interview preparation tips for other job seekers - About your self and discuss your family relative and second round written test and experience skill is available yeh not

Interview Questionnaire 

1 Question

  • Q1. Production planing
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Mathamatics resoning

I applied via Company Website and was interviewed before Dec 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Technical 

(5 Questions)

  • Q1. How to manage your man power?
  • Q2. Technical questions about machines.
  • Q3. How to maintain production quantity and quality output?
  • Ans. 

    Maintain production quantity and quality output by optimizing processes, training employees, and monitoring performance.

    • Regularly review and optimize production processes to eliminate inefficiencies and reduce waste.

    • Provide ongoing training and development opportunities for employees to improve their skills and knowledge.

    • Implement quality control measures to ensure that products meet or exceed customer expectations.

    • Mon...

  • Answered by AI
  • Q4. Questions about family backgrounds
  • Q5. Introduce yourself about your own

Interview Preparation Tips

Interview preparation tips for other job seekers - Sir,
I will thankfull for given this opportunity to Express my knowledge..
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Problem solving
  • Q2. Documents update
Contribute & help others!
anonymous
You can choose to be anonymous

CIE Automotive Interview FAQs

How many rounds are there in CIE Automotive Production Associate interview?
CIE Automotive interview process usually has 1 rounds. The most common rounds in the CIE Automotive interview process are HR.
What are the top questions asked in CIE Automotive Production Associate interview?

Some of the top questions asked at the CIE Automotive Production Associate interview -

  1. What is the difference between 2STROKE AND 4 STROKE ENGI...read more
  2. What is the least count of vanier calip...read more
  3. Difference between petrol and diesel eng...read more

Recently Viewed

JOBS

Gushwork

14 jobs

JOBS

Browse jobs

Discover jobs you love

JOBS

GroundTruth

33 jobs

PHOTOS

Growisto

7 office photos

JOBS

Maa Jagdamba Trading

No Jobs

JOBS

JPMorgan Chase & Co.

No Jobs

INTERVIEWS

CIE Automotive

60 top interview questions

JOBS

Raintree Family Office

No Jobs

JOBS

StepsIN Technologies

No Jobs

JOBS

Allied Engineering Works

No Jobs

Tell us how to improve this page.

Anonymously discuss salaries, work culture, and many more

Get Ambitionbox App

Interview Questions from Similar Companies

Tata Motors Interview Questions
4.2
 • 999 Interviews
Maruti Suzuki Interview Questions
4.2
 • 586 Interviews
Hero MotoCorp Interview Questions
4.1
 • 334 Interviews
TVS Motor Interview Questions
4.0
 • 313 Interviews
Bajaj Auto Interview Questions
3.9
 • 267 Interviews
Ashok Leyland Interview Questions
4.1
 • 239 Interviews
UNO Minda Interview Questions
4.0
 • 169 Interviews
Exide Industries Interview Questions
3.5
 • 169 Interviews
View all

Fast track your campus placements

View all
Quality Engineer
157 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
127 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
113 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
100 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Executive
93 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare CIE Automotive with

Bharat Forge

3.9
Compare

Mahindra & Mahindra

4.1
Compare

Tata Motors

4.2
Compare

Ashok Leyland

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview