Upload Button Icon Add office photos

Filter interviews by

Celeros Flow Technology Interview Questions and Answers

Updated 6 Jan 2025

Celeros Flow Technology Interview Experiences

Popular Designations

5 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Jul 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Tool Test 

(3 Questions)

  • Q1. Was asked to 3D model a pump casing. others have got some other components.
  • Q2. Interview questions were about API 610.
  • Q3. Also some basics in Mechanical engineering, Fits and drafting is checked.
Round 3 - HR 

(2 Questions)

  • Q1. Why Celeros flow technology?
  • Ans. 

    Celeros flow technology offers innovative solutions for optimizing fluid handling systems.

    • Celeros flow technology provides advanced solutions for improving efficiency and performance in fluid handling systems.

    • Their products are designed to enhance reliability and reduce maintenance costs.

    • Celeros has a proven track record of delivering high-quality flow technology solutions to various industries.

    • The company's commitment...

  • Answered by AI
  • Q2. Expectations from company, general HR questions. explained on boarding questions etc.,

Design Engineer Interview Questions asked at other Companies

Q1. Stress Strain curve, What will happen if you use petrol in diesel engine and Diesel in petrol engone.
View answer (6)
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. All about pump instruments

Interview Preparation Tips

Interview preparation tips for other job seekers - Good interview almost 4 level

Senior Instrument Engineer Interview Questions asked at other Companies

Q1. What type of instruments do you have in plant?
View answer (3)

Interview Questions & Answers

user image Anonymous

posted on 6 Jan 2025

Interview experience
2
Poor
Difficulty level
Easy
Process Duration
4-6 weeks
Result
No response

I applied via Approached by Company and was interviewed before Jan 2024. There were 3 interview rounds.

Round 1 - One-on-one 

(1 Question)

  • Q1. Vendors handled in the industry? Knowledge on inco terms
Round 2 - One-on-one 

(1 Question)

  • Q1. Vendor selection basis
Round 3 - HR 

(1 Question)

  • Q1. Salary expectations

Interview Preparation Tips

Interview preparation tips for other job seekers - The HR team reached out to me for an interview for the position in Bangalore and I had indicated my existing package with my then company. Post this initial discussion they scheduled further technical rounds with the global team leaders.
The final round was the HR round which kept getting postponed for reasons from their end. They were insistent on me telling them the number I wanted as a package. I did share the number and later on I was ghosted by the HR and the team. Multiple calls, messages and emails went unanswered. If budget or my skills were a problem, any answer would have sufficed. FYI, I understand that the same HR team is still around today.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Technical questions regarding api, pumps.

Mechanical Engg. Design Interview Questions asked at other Companies

Q1. What are the Drawing softwares you're aware of And How much relevant experience you have in for each software
View answer (3)

Celeros Flow Technology interview questions for popular designations

 Senior Instrument Engineer

 (1)

 Design Engineer

 (1)

 Senior Service Engineer

 (1)

 Mechanical Engg. Design

 (1)

I applied via Naukri.com and was interviewed in Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Regarding Joining and Notice Period
Round 3 - Technical 

(1 Question)

  • Q1. Questions regarding my experience and hand on experience.

Interview Preparation Tips

Interview preparation tips for other job seekers - Keep focus on your strength. Give simple and straight answer.

Senior Service Engineer Interview Questions asked at other Companies

Q1. 1) what are the geometries of cnc lathe, vmc machine 2) how to calculate feed ,speed, rpm , spindle power. 3) How to change bearing of ball screw. 4) what are types of bearings and their angles for angular bearing, what types of combination... read more
View answer (1)

Interview questions from similar companies

I applied via Naukri.com and was interviewed in Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Business analysis

Interview Preparation Tips

Interview preparation tips for other job seekers - Medium difficulty
Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Recruitment Consulltant and was interviewed before Feb 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Case Study 

Practise very well in advance with sample cases in mock sessions

Round 3 - Case Study 

Practise very well in advance with real cases with your friends

Round 4 - HR 

(2 Questions)

  • Q1. Friendly conversation with open perspective and consideration for your asks
  • Q2. Be ready to discuss your expectations in this round

Interview Preparation Tips

Interview preparation tips for other job seekers - research very well be authentic and curious during the process

Interview Preparation Tips

Round: HR Interview
Experience: They had 4 interviews.
McK1: Have faint recollections. However I remember I did well on the case and had loadsa HR involved specially in my work on internships and research paper.

Round: Technical Interview
Experience: McK2: The interviewer was a PhD in Chem Engg from Stanford followed by an MBA from Harvard. I found this before going in and got real nervous. He started off with some Chemical Engg questions and soon realized it was no use! (He did even comment that I had not learnt anything in Chem engg in the 4 years). We then moved on a case of petrochemical industry where a new player wanted to enter an oversaturated market. I concluded that scale is important and the entry has to be below the existing market price. Some HR including my question to him. Had a long discussion on Foreign MBA vs Indian MBA. At the end of the interview, I guess I had done a good enough job (surprisingly after the start I had) and was called in for the next 2 interviews..

Round: Case Study Interview
Experience: McK3: This was a disaster! And a big one. I was given an extremely easy case on nuclear reactor vs coal reactor economics. Simple mathematics which I screwed up because of just 1 simple error. I realized the same pretty late and pointed it out. He said it was ok. No HR

Round: Other Interview
Experience: McK4: The whole interview was a discussion on my BTP and seminar. BTP was related to Phosphoric Acid production. The discussion revolved around whether phosphoric acid should be produced in India or whether we should produce it outside from where we import ore. Then we moved on to my seminar which was related to Kyoto Protocol. Finally I asked question on how different is a foreign MBA vis a vis an Indian one. Very peaceful and fun interview!
Tips: The single biggest mistake I committed was going in a haste into the McK 3rd interview. I got involved in some placement work between the interviews and forgot to carry my folder or even a pen. This is probably why I did not do well on the case (which was probably the easiest of all 8). Its very important that you take 5 minutes off before walking in, get your composure and stop worrying about other things and just attend to the interview on hand. Key learnings included the fact that it is relatively difficult to come back if you don't start well. Thus its is better to take something like 5 seconds before you answer the first 2-3 questions to recollect thoughts, organize them and frame them well. Also that you need to be comfortable with everything on your resume. I appeared for 8 interviews and never mentioned/was asked anything related to MI which I thought was the most important point on my resume. Instead I was questioned on my hobbies. Smallest points on the resume could be the ones you are grilled most on. Another very important thing about case interviews is the fact that the interviewer will be guiding you all through to the final solution. Any thing that he speaks should be heard and taken notice of. Most of the times there will be a small hint given at some point and all you need to do is catch on to it! Structuring your answers is extremely important. One more important thing to keep in mind is that all your answers should kind of show to the company that you can FIT into the company, the job and the culture. It is also important you walk in with the feeling that you can get the job. Specifically in cases, if you get stuck, take some time off to think. Structure your solution well, it carries the maximum weight.

General Tips: Firstly suit up only in case you are comfortable in it. It makes no sense to wear it and be uncomfortable throughout. And in my opinion even if you do not wear one, it never goes against you (at least consulting). For companies like FMCG/Tech its better not to suit up because it doesn't go with the company cultures. If its IBanking, it is good if you wear one. It is very important that you have some questions for the interviewer for any given company. And it is more important that the questions are intelligent and genuine. Attending PPT/ reading up website is a must for the same. Most importantly you should not talk to any other candidate on interview experience before your interview. The interview changes for every candidate. If say for example you hear the case beforehand, the company is bound to find out which would ruin your chances for sure. Further talking to people who have already appeared increases the nervousness. Posture is something that you have to take care of. People have a tendency to relax which should not be the case. You should seem eager for both the interview and the job. While answering any question the most important things to keep in mind are • Take 5 seconds off before venturing into any answer. Compose your thoughts real well. Then start. Its better to get the whole thing in a impactful way then to miss out on certain points. It also doubles up as giving the interview a feel that you are thinking before answering.
College Name: IIT BOMBAY

Interview Preparation Tips

Round: Interview
Experience: There were four interviews, with a case study and some HR questions in each. 
The first interviewer was an IIT Delhi alumnus and asked me a case on whether a telecom company should go for exploring the 3G license option. He provided me with information as and when I asked for it. Later during the interview, I asked him about his experience with McKinsey. 
The second interview involved a case on acquiring land for a B-School. The case was mainly qualitative and the HR questions were also straightforward. Giving a thought to goals and aspirations helped. 
My third interview was with a partner. Again, standard PI questions: something about yourself, why consulting, what if not McKinsey, important attributes of a good leader, why should we hire you etc. The case was on the design on entry and exit gates for Delhi Metro. 
My final interview was again with a partner and there was no HR part. It started with a case, and then there was nothing else to discuss. Anything and everything that could possibly go wrong did. I did badly in the case and towards the end made errors with simple calculations as well.
Tips: It is important to think on your feet even if you are not able to make much headway with the case. This case had sealed my fate.

General Tips: Most of the times, things go on as they are supposed to, we do what we are assigned, meet deadlines and get it over with. Knowing what to do after four or five years of study at IIT is one of those deciding phases where we have to do something out of routine, think about what we actually want, what we can get from where we are. 
Here is an account of how I went about making my decisions and preparing for it. In one of those routine placement talks, a speaker remarked, ‘there are two ways you can choose a career- by extrapolation from what you have right now and by interpolation from your long term goal’. This helps one realize the importance of identification of long term goal. In my opinion, once a person is convinced about that, it is easy to pull off an interview; more importantly, it is easy to identify which options to prepare for. 
I’d eliminated higher studies at around the middle of fourth year and was convinced to sit for McKinsey and core companies. Resume preparation began at around August with the master resume followed by a resume for core electrical companies which come to campus. Later I made a one page resume for McKinsey. Preparing for McKinsey helped a great deal in preparing for the HR section of the interviews. After McKinsey results, I revised the electrical courses required for the companies which were coming to the campus.
The first day was hectic with a whole lot of companies lined up. One had to be prepared for
all the companies because the shortlist came just the night earlier.
College Name: IIT KANPUR

Interview Preparation Tips

Round: Test
Experience: McKinsey has an aptitude test, but the test results don't have a significant weight in final decision. 
Resume shortlist for consulting companies is perhaps the most competitive among all firms and therefore,
in the interest of meaningful utilization of time, it's best to start case study preparation only after the shortlist is out. There's typically little more than a month between then and placement day, which is more than enough to prepare for any interview.

General Tips: Application process to all companies starts typically with a resume shortlist and therefore it is of utmost importance to write a good, impressive resume. A lot of people with great credentials fail to make this initial mark because their resume is poorly organized. It's good to have resume points, but it's equally important, if not more, to write them properly. Writing a perfect resume is an art that needs to be learnt
and God bless McKinsey for conducting an amazingly helpful workshop on resume writing.
It's a great idea to attend the workshop even if you are completely sure of never joining McKinsey.

Resume-writing is an iterative and time consuming process. So, best start a fortnight before deadline. Remember that it's a one-time effort. Once a good resume is ready, it can be used throughout the placement season with minor modifications. Do it once and do it correct. It took me about four or five iterations to end up with my final resume. It's a good idea to show the resume to lots of colleagues and seniors and challenge them to tear it down word-by-word.
College Name: IIT MADRAS

Celeros Flow Technology Interview FAQs

How many rounds are there in Celeros Flow Technology interview?
Celeros Flow Technology interview process usually has 2-3 rounds. The most common rounds in the Celeros Flow Technology interview process are Resume Shortlist, HR and Technical.
How to prepare for Celeros Flow Technology interview?
Go through your CV in detail and study all the technologies mentioned in your CV. Prepare at least two technologies or languages in depth if you are appearing for a technical interview at Celeros Flow Technology. The most common topics and skills that interviewers at Celeros Flow Technology expect are SAP, Pumps, Customer Experience, Advertising and AutoCAD.
What are the top questions asked in Celeros Flow Technology interview?

Some of the top questions asked at the Celeros Flow Technology interview -

  1. Why Celeros flow technolo...read more
  2. Was asked to 3D model a pump casing. others have got some other componen...read more
  3. Vendors handled in the industry? Knowledge on inco te...read more

Tell us how to improve this page.

Celeros Flow Technology Interview Process

based on 6 interviews

Interview experience

3.3
  
Average
View more

Interview Questions from Similar Companies

MagicBricks Interview Questions
4.3
 • 325 Interviews
Sheenlac Paints Interview Questions
4.5
 • 205 Interviews
ABC Consultants Interview Questions
3.9
 • 194 Interviews
Chegg Interview Questions
4.1
 • 158 Interviews
Tracxn Interview Questions
3.1
 • 102 Interviews
MAQ Software Interview Questions
2.0
 • 102 Interviews
Testbook.com Interview Questions
3.6
 • 101 Interviews
Turing Interview Questions
3.3
 • 96 Interviews
View all

Celeros Flow Technology Reviews and Ratings

based on 31 reviews

3.7/5

Rating in categories

3.1

Skill development

4.0

Work-life balance

3.4

Salary

3.8

Job security

3.5

Company culture

3.1

Promotions

3.5

Work satisfaction

Explore 31 Reviews and Ratings
Design Engineer - Screw Pump

Bangalore / Bengaluru

6-10 Yrs

Not Disclosed

Design Engineer - Closures/Pressure Vessels

Bangalore / Bengaluru

3-6 Yrs

Not Disclosed

Design Engineer - Gate Valves

Bangalore / Bengaluru

6-8 Yrs

₹ 6-10 LPA

Explore more jobs
Senior Design Engineer
14 salaries
unlock blur

₹9.5 L/yr - ₹17 L/yr

Design Engineer
12 salaries
unlock blur

₹6 L/yr - ₹15.5 L/yr

Applications Engineer
6 salaries
unlock blur

₹5 L/yr - ₹11.6 L/yr

Associate Analyst
6 salaries
unlock blur

₹4 L/yr - ₹5.6 L/yr

Financial Analyst
5 salaries
unlock blur

₹5.8 L/yr - ₹7.6 L/yr

Explore more salaries
Compare Celeros Flow Technology with

MagicBricks

4.3
Compare

State Street Syntel

3.7
Compare

Sterling & Wilson

4.1
Compare

AXA Business Services

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview