Upload Button Icon Add office photos

Filter interviews by

Capacite Structures bbs engineer Interview Questions and Answers

Updated 15 Nov 2020

Capacite Structures bbs engineer Interview Experiences

1 interview found

bbs engineer Interview Questions & Answers

user image Aasar Mehdi Sayed

posted on 15 Nov 2020

I applied via Referral and was interviewed in Oct 2020. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Unit weight of 32mm dia bar
  • Ans. 

    The unit weight of 32mm dia bar is 6.31 kg/m.

    • The unit weight of steel bars can be calculated using the formula: D^2/162.25, where D is the diameter of the bar in mm.

    • For 32mm dia bar, the unit weight is calculated as 32^2/162.25 = 6.31 kg/m.

    • Unit weight is an important factor in construction as it helps in determining the weight of the structure and the amount of material required.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I was asked what is the unit weight of 32mm dia bar. I answered it's 7850kg/m^3
Interviewer said it's wrong.
Then I came to know interviewer want to know weight of 32mm dia bar per metre lenght. Then I answered it's 32^2÷162.

Interview questions from similar companies

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Mar 2024. There was 1 interview round.

Round 1 - Technical 

(3 Questions)

  • Q1. Density of steel concrete and pcc all
  • Ans. 

    Density of steel, concrete, and PCC varies based on composition and materials used.

    • Density of steel is around 7850 kg/m^3

    • Density of normal concrete is around 2400 kg/m^3

    • Density of PCC (Plain Cement Concrete) is around 2200 kg/m^3

    • Density can vary based on the mix design and additives used

  • Answered by AI
  • Q2. Regarding about quality of concrete ,and all types of construction materials
  • Q3. Structural related questions of beam and slab and all

Interview Preparation Tips

Interview preparation tips for other job seekers - Whatever mentioned in ur resume or CV be thoroughly prepared on that.

I applied via Approached by Company and was interviewed in Jul 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Whats Survey.type of survey.what's of BBS.
  • Ans. 

    BBS stands for Behavior-Based Safety. It is a type of survey used to identify and prevent workplace hazards.

    • BBS focuses on observing and analyzing employee behavior to identify potential safety hazards

    • The survey involves collecting data on the frequency and severity of unsafe behaviors

    • The goal of BBS is to create a safer work environment by addressing the root causes of unsafe behavior

    • Examples of BBS surveys include sa...

  • Answered by AI
  • Q2. Self introduction. Name

Interview Preparation Tips

Topics to prepare for Om Metals Infraprojects Senior Engineer interview:
  • Technically
  • Visual Basic
Interview preparation tips for other job seekers - Good interview ,relax after interview.and join company.

I appeared for an interview before Dec 2019.

Interview Questionnaire 

1 Question

  • Q1. Only written exam conducted is SSC JE and DV process

Interview Preparation Tips

Interview preparation tips for other job seekers - This is JE post for 3 branches civil mechanical and electrical. People interested in govt job apply for this job

I applied via Indeed and was interviewed in Nov 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Every question related to your Current job role
Round 3 - HR 

(1 Question)

  • Q1. Salary nagotiation and benefits discussion

Interview Preparation Tips

Interview preparation tips for other job seekers - Read your resume carefully and go blindly
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Feb 2023. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Explain your work profile.
Round 3 - Technical 

(1 Question)

  • Q1. Second round with plant head.
Round 4 - HR 

(1 Question)

  • Q1. Salary discussion.

Interview Questionnaire 

2 Questions

  • Q1. Plant start up , commissioning and bring back to operation . Major hazard faced in the Plant
  • Ans. 

    The major hazard faced during plant start up, commissioning and bringing back to operation is equipment failure.

    • Equipment failure due to improper installation or maintenance

    • Electrical hazards during commissioning

    • Chemical leaks or spills during start up

    • Fire hazards due to ignition sources

    • Safety hazards due to lack of proper training or procedures

    • Environmental hazards due to improper waste disposal

    • Human error during star

  • Answered by AI
  • Q2. Documentation , preparation of monthly report and quality control rreport

I applied via Referral and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Group Discussion 

Past work experience, trainings etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Do Swot analysis of your skills and highlight Strengths. softly mention weakness and action plan to overcome it.

I applied via Campus Placement and was interviewed before Jan 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. BMD DIAGRAM OF PROPED CANTILEVER BEAM
  • Ans. 

    BMD diagram of a propped cantilever beam shows the variation of bending moment along the length of the beam.

    • BMD diagram is a graphical representation of bending moment variation.

    • Propped cantilever beam is a beam that is fixed at one end and supported by a prop at some distance from the fixed end.

    • The BMD diagram of a propped cantilever beam has two maximum points, one at the fixed end and the other at the prop.

    • The bendi...

  • Answered by AI
  • Q2. Zero ata end and curve with max at support at other end
  • Ans. 

    The question is unclear and requires clarification.

    • The question needs to be rephrased or clarified.

    • It is unclear what is being asked.

    • More information is needed to provide an answer.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Show confidence give good answer

Interview Questionnaire 

6 Questions

  • Q1. Self instructions with writer exam
  • Q2. Basic questions
  • Q3. Competitive question
  • Q4. General questions
  • Q5. Technical round basic
  • Q6. Dept in technical round

Interview Preparation Tips

Round: Resume Shortlist
Experience: First the will select resume

Tell us how to improve this page.

Senior Store Officer
6 salaries
unlock blur

₹4.8 L/yr - ₹6 L/yr

Civil Engineer
6 salaries
unlock blur

₹3.6 L/yr - ₹9 L/yr

Civil Site Engineer
5 salaries
unlock blur

₹4.2 L/yr - ₹6.8 L/yr

Deputy General Manager Execution
4 salaries
unlock blur

₹18 L/yr - ₹18 L/yr

Civil Lab Technician
4 salaries
unlock blur

₹3.1 L/yr - ₹4.1 L/yr

Explore more salaries
Compare Capacite Structures with

McNally Bharat Engineering

4.0
Compare

Military Engineer Services

4.4
Compare

Chetak Enterprises

4.0
Compare

Jash Engineering

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview