Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by Btl Epc Team. If you also belong to the team, you can get access from here

Btl Epc Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Btl Epc Senior Planning Engineer Interview Questions and Answers

Updated 14 May 2024

Btl Epc Senior Planning Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Referral and was interviewed in Apr 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. About planning question asked
  • Q2. Interview was pure technical

Interview questions from similar companies

I applied via Recruitment Consulltant and was interviewed in Oct 2020. There were 5 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Basic of fabrication, materials welding processes, distortion control methods, lifting techniques
  • Q2. Telephonic conversation regarding basics of welding and material properties
  • Q3. Interview with a panel of 4 judges
  • Q4. Salary negotiation notice period etc

Interview Preparation Tips

Interview preparation tips for other job seekers - Be prepared. Be honest. Say no if you don't know the answer instead of guessing or pretending

I applied via Naukri.com and was interviewed before Oct 2021. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Tell me something about your self??
  • Q2. What is your daily work management???
Round 3 - HR 

(1 Question)

  • Q1. Why are you want to change company??

Interview Preparation Tips

Interview preparation tips for other job seekers - If you have expain DWM properly and Position in organization chart then your selection is confirm.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Sep 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is a resistor?
  • Ans. 

    A resistor is an electronic component that resists the flow of electrical current.

    • Resistors are used to control the amount of current flowing in a circuit.

    • They are measured in ohms (Ω) and have color-coded bands to indicate their resistance value.

    • Resistors dissipate energy in the form of heat when current flows through them.

    • Common types of resistors include carbon film, metal film, and wirewound resistors.

  • Answered by AI
  • Q2. What is a transistor?
  • Ans. 

    A transistor is a semiconductor device used to amplify or switch electronic signals.

    • Transistors are fundamental building blocks of modern electronic devices.

    • They can amplify electrical signals, control the flow of current, and act as switches.

    • Common types of transistors include bipolar junction transistors (BJTs) and field-effect transistors (FETs).

  • Answered by AI

I applied via Company Website and was interviewed in Feb 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Based upon experience the question is different from each other.
Round 3 - One-on-one 

(1 Question)

  • Q1. Background and experience related questions
Round 4 - One-on-one 

(1 Question)

  • Q1. Technical Background and field related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - I had shared all my experience and knowledge of how I accomplished my work.
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Properly align and format text in your resume. A recruiter will have to spend more time reading poorly aligned text, leading to high chances of rejection.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Refrigeration cycle ?
  • Ans. 

    Refrigeration cycle is a thermodynamic cycle used in refrigerators and air conditioning systems to transfer heat from a low temperature reservoir to a high temperature reservoir.

    • Consists of four main components: compressor, condenser, expansion valve, and evaporator

    • Refrigerant is compressed in the compressor, then condensed in the condenser, expanded in the expansion valve, and evaporated in the evaporator

    • Heat is absor...

  • Answered by AI
  • Q2. Theory on refrigeration
  • Ans. 

    Refrigeration theory involves the transfer of heat from a low temperature region to a high temperature region using a refrigerant.

    • Refrigeration is based on the principles of thermodynamics, specifically the second law which states that heat naturally flows from a higher temperature to a lower temperature.

    • The refrigeration cycle consists of four main components: compressor, condenser, expansion valve, and evaporator.

    • The...

  • Answered by AI
  • Q3. Compressor clearances
Round 3 - HR 

(1 Question)

  • Q1. Why u want to join Kirloskar

I applied via Naukri.com and was interviewed in May 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. They just asked basics que. related to job profile.. seeking confidence..

Interview Preparation Tips

Interview preparation tips for other job seekers - Be confident.... should have basic knowledge of process. and knowledege of work and items.. and their costing and commercial terms.
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-

I applied via Referral

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Don’t add your photo or details such as gender, age, and address in your resume. These details do not add any value.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Work Experience Questions
Round 3 - HR 

(1 Question)

  • Q1. Behavioral Questions
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Rehire so only salary negotiations

Interview Questionnaire 

6 Questions

  • Q1. Drum level transmitter
  • Q2. Boiler interlocking
  • Q3. Vibration sensors
  • Q4. Turbine parameters and interlocking
  • Q5. DCS tag assigning process
  • Ans. 

    DCS tag assigning process involves assigning unique names to process variables for monitoring and control.

    • DCS tag assigning process is crucial for efficient process control and monitoring.

    • Each tag represents a process variable and is assigned a unique name for easy identification.

    • Tags can be assigned manually or automatically based on the process requirements.

    • Tag naming conventions should be consistent and follow indus...

  • Answered by AI
  • Q6. Smart positioners like Simens Sipart 02

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident don't nervous

Skills evaluated in this interview

Btl Epc Interview FAQs

How many rounds are there in Btl Epc Senior Planning Engineer interview?
Btl Epc interview process usually has 1 rounds. The most common rounds in the Btl Epc interview process are Technical.
What are the top questions asked in Btl Epc Senior Planning Engineer interview?

Some of the top questions asked at the Btl Epc Senior Planning Engineer interview -

  1. About planning question as...read more
  2. Interview was pure techni...read more

Tell us how to improve this page.

Btl Epc Senior Planning Engineer Interview Process

based on 1 interview

Interview experience

5
  
Excellent
View more

Interview Questions from Similar Companies

Thermax Limited Interview Questions
4.1
 • 252 Interviews
ABB Interview Questions
4.1
 • 238 Interviews
JNS Instruments Interview Questions
3.8
 • 27 Interviews
Ingersoll Rand Interview Questions
4.0
 • 27 Interviews
Shakti Pumps Interview Questions
3.8
 • 25 Interviews
Kennametal Interview Questions
3.6
 • 24 Interviews
ESAB Interview Questions
4.1
 • 22 Interviews
Tega Industries Interview Questions
3.7
 • 21 Interviews
View all

Btl Epc Senior Planning Engineer Reviews and Ratings

based on 1 review

4.0/5

Rating in categories

2.0

Skill development

4.0

Work-life balance

4.0

Salary

3.0

Job security

2.0

Company culture

3.0

Promotions

4.0

Work satisfaction

Explore 1 Review and Rating
Assistant Manager
16 salaries
unlock blur

₹4.5 L/yr - ₹6.9 L/yr

Junior Engineer
14 salaries
unlock blur

₹2.4 L/yr - ₹4.8 L/yr

Site Engineer
14 salaries
unlock blur

₹3.2 L/yr - ₹5.5 L/yr

Senior Engineer
13 salaries
unlock blur

₹4 L/yr - ₹6.8 L/yr

Senior Manager
13 salaries
unlock blur

₹5.8 L/yr - ₹9.5 L/yr

Explore more salaries
Compare Btl Epc with

Thermax Limited

4.1
Compare

ABB

4.1
Compare

Isgec Heavy Engineering

3.8
Compare

Kirloskar Pneumatic

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview