Upload Button Icon Add office photos

Bses Rajdhani Power

Compare button icon Compare button icon Compare

Filter interviews by

Bses Rajdhani Power Engineer Interview Questions and Answers

Updated 1 May 2022

Bses Rajdhani Power Engineer Interview Experiences

1 interview found

I applied via Naukri.com and was interviewed before May 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. What is ELCB ,explain its working
  • Ans. 

    ELCB stands for Earth Leakage Circuit Breaker. It is a safety device that automatically switches off the electrical circuit when it detects current leakage.

    • ELCB is also known as RCCB (Residual Current Circuit Breaker).

    • It works by comparing the incoming and outgoing current in a circuit.

    • If there is a difference in current, it means that some current is leaking to the earth, and the ELCB trips the circuit.

    • ELCB is used to...

  • Answered by AI
  • Q2. What are DERC guidelines
  • Ans. 

    DERC guidelines are regulations set by the Delhi Electricity Regulatory Commission for the power sector in Delhi.

    • DERC guidelines regulate the power sector in Delhi

    • They cover areas such as tariff determination, grid connectivity, and power purchase agreements

    • The guidelines aim to ensure fair and transparent practices in the power sector

    • DERC guidelines are regularly updated to keep up with changing industry trends and te

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - not good for outsource employees,deskjob is fine ,u have to fave lots of pressure in site job ,also u have to face seasonal change , pollution ,but salary remains same for all. ,only 5 days work only this is the advantage

Interview questions from similar companies

Interview Preparation Tips

Round: Other Interview
Experience: There is one round combined interview(Technical+HR)
They have mentioned very clearly what they are looking for.
In HR they asked questions based on hobbies
Tips: Since they have mentioned very clearly what they are looking for so give more importance to that things

Skill Tips: Refresh all basics but particularly Thermal engineering not entire mechanical engineering
Skills: Thermal engineering, Mechanical engineering
College Name: IIT MADRAS

Interview Preparation Tips

Round: Resume Shortlist
Experience: Initial shortlisting was based on resume
Tips: A good resume ensure your selection for interview

Round: Technical Interview
Experience: There was one round Technical cum HR Interview
For technical
The questions were on basics of power systems(Undergraduate stuff) but more oriented towards PGCIL work that is related to Transformers,Generators,Transmission lines etc.
Apart from this basic knowledge of HVDC were tested.also questions were asked related to the indian powergrid like voltage levelsuse of phasor ,measurement units,Interconnection of grids, major HVDC links etc.
For HR
They asked about my hobbies,schooling etc.general HR questions ,nothing peculiar
Tips: 1.Focus on the Basics of power systems(mostly undergraduate level)
2.Also go through reports(Technical,about future plans,enquiry reports of grid collapse) which found on PGCIL website and other websites like ministry of power,CERC etc.

General Tips: One has to be very confident and relaxed
Skill Tips: They will see how your knowledge in power systems help PGCIL .so Focus on topic related to PGCIL like Generators,Transformers,Transmission lines etc.
Skills: Substation Automation, Power systems
College Name: IIT MADRAS

Interview Questionnaire 

1 Question

  • Q1. One building designed for some place like delhi later supposed to shifted to chennai then will yo do changes in the design?if yes explain

Interview Preparation Tips

Round: Technical Interview
Experience: One round Technical cum HR interview
Typical PSU interview ,casual questions about my project and questions related to that only-Earthquake effect on structures and its design process. Richter scale and any other scale for earthquake.
Wind and Earthquake code provisions like return period in both cases, severemost Earthquake ever occured on ground.

Skill Tips: Generally Questions Asked from your project so clear the concept of project. Earthquake effect on a structure and its design process was asked.
Skills: Based on project
College Name: IIT MADRAS

Interview Questionnaire 

2 Questions

  • Q1. Earthquake effects on structures and its design process. Richter scale and other scales for earthquakes
  • Ans. 

    Earthquake effects on structures and design process, including Richter scale and other scales.

    • Earthquakes can cause various effects on structures, such as shaking, ground rupture, and liquefaction.

    • The design process for structures takes into account the potential seismic forces and aims to ensure safety.

    • The Richter scale is a logarithmic scale used to measure the magnitude of an earthquake.

    • Other scales used for earthqu...

  • Answered by AI
  • Q2. A building designed for some place like Delhi, later supposed to shifted to Chennai, then will you do changes in the design? If yes explain. Would you prefer OPC or PPC for Delhi climate?

Interview Preparation Tips

Round: Interview
Experience: Will be like a typical PSU interview. Technical questions especially the ones related to your projects can be expected.
Tips: Preparation: Maintain a good CGPA
Scholastic achievements
Projects done

Skill Tips: ""
College Name: IIT Madras

I applied via Other and was interviewed before Jul 2017. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What type of dampings are there in case of vibration.
  • Ans. 

    There are several types of dampings in case of vibration, including viscous damping, hysteretic damping, and structural damping.

    • Viscous damping: It occurs when a fluid or viscous material is used to dissipate energy and reduce vibration.

    • Hysteretic damping: It is caused by the internal friction within a material, which converts mechanical energy into heat.

    • Structural damping: It is inherent in the structure itself and is...

  • Answered by AI

Interview Preparation Tips

General Tips: It was held in Delhi at Nehru palace in year 1985 after an all India written test.I was recruited in ITI Ltd a month before and so was relaxed not to prepare much for the interview. I told the interviewers that I just finished my 2 ND semester of M.Tech. at Itbhu.one member was from IIT Delhi and I could not answer viscous damping, inertial damping etc for his question on types of damping and I was rejected.Selection was made of my 2 years junior of graduation college who too had joined ITI Ltd in 1985.
Skills: Analytical Skills
Duration: >3 Months

I was interviewed before Nov 2016.

Interview Questionnaire 

3 Questions

  • Q1. About yourself
  • Q2. Will you work at any location
  • Ans. 

    Yes, I am willing to work at any location for the Senior Engineer position.

    • I am open to relocating for the right opportunity

    • I have experience working in different locations

    • I am flexible and adaptable to new environments

  • Answered by AI
  • Q3. Why you think you can work in any adverse situation
  • Ans. 

    I have a proven track record of staying calm and focused in challenging situations, allowing me to problem-solve effectively.

    • I have experience working in high-pressure environments and have successfully delivered projects on time despite obstacles.

    • I am adaptable and can quickly assess a situation to determine the best course of action.

    • I have strong problem-solving skills and can think creatively to find solutions in ad

  • Answered by AI

Interview Preparation Tips

Round: Test
Duration: 1 hour
Total Questions: 100

Round: Group Discussion
Duration: 20 minutes

Engineer Interview Questions & Answers

CESC user image Anonymous

posted on 22 Sep 2021

I applied via Campus Placement and was interviewed before Sep 2020. There were 4 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. Draw Induction Motor equivalent ckt.
  • Ans. 

    Induction Motor equivalent circuit consists of stator and rotor circuits with mutual induction.

    • The stator circuit includes three-phase winding and a power source.

    • The rotor circuit includes rotor winding and a short-circuited conductor.

    • The mutual induction between stator and rotor circuits causes the rotor to rotate.

    • The equivalent circuit can be represented using a circuit diagram with resistances, inductances, and mutu...

  • Answered by AI
  • Q2. Draw B-H curve
  • Ans. 

    B-H curve is a graph that shows the relationship between magnetic field strength and magnetic flux density.

    • B-H curve is used to characterize the magnetic properties of a material.

    • It is a plot of magnetic flux density (B) versus magnetic field strength (H).

    • The slope of the curve at any point is the permeability of the material at that point.

    • The curve can be used to determine the saturation point of a material.

    • Examples o...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Focus mostly on Electrical Machines and Power systems if you belong to electrical background.

Interview Questionnaire 

2 Questions

  • Q1. Tell me about your self
  • Q2. Time maintenance to your project

Interview Questionnaire 

1 Question

  • Q1. Why should we hire you ?

Bses Rajdhani Power Interview FAQs

How many rounds are there in Bses Rajdhani Power Engineer interview?
Bses Rajdhani Power interview process usually has 2 rounds. The most common rounds in the Bses Rajdhani Power interview process are Resume Shortlist and Technical.
What are the top questions asked in Bses Rajdhani Power Engineer interview?

Some of the top questions asked at the Bses Rajdhani Power Engineer interview -

  1. what is ELCB ,explain its work...read more
  2. what are DERC guideli...read more

Tell us how to improve this page.

Bses Rajdhani Power Engineer Salary
based on 110 salaries
₹3 L/yr - ₹9.2 L/yr
At par with the average Engineer Salary in India
View more details

Bses Rajdhani Power Engineer Reviews and Ratings

based on 23 reviews

3.4/5

Rating in categories

3.2

Skill development

3.2

Work-life balance

2.9

Salary

3.7

Job security

3.3

Company culture

2.4

Promotions

3.2

Work satisfaction

Explore 23 Reviews and Ratings
Assistant Manager
192 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Electrical Engineer
163 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
119 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Engineer
110 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
98 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Bses Rajdhani Power with

Tata Power

3.9
Compare

Adani Power

3.9
Compare

Reliance Power

4.1
Compare

NTPC

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview