Bosch Product Manager Interview Questions and Answers

Q1. What is your J.D
Add your answer
Q2. How to handle manpower in shift
Ans. 
Manpower in shift can be handled by proper planning, communication, training, and monitoring.
• Create a shift schedule that ensures adequate coverage and proper distribution of workload.

• Communicate clearly with employees about their shift timings, responsibilities, and expectations.

• Provide training to employees on their roles and responsibilities during the shift.

• Monitor the performance and productivity of employees duri...read more
Answered by AI
Add your answer

Q1. Self introduction
Add your answer
Q2. Why you want to join jtekt
Ans. 
I want to join JTEKT because of their reputation for innovation and commitment to excellence in the production engineering field.
• JTEKT has a strong reputation for innovation and cutting-edge technology in the production engineering industry.

• I am impressed by JTEKT's commitment to excellence and continuous improvement in their products and processes.

• I believe that working at JTEKT will provide me with valuable opportuni...read more
Answered by AI
Add your answer

Q1. What is 7 QC
Ans. 
7 QC is a set of quality control tools used in manufacturing to identify and solve production problems.
• 7 QC stands for Seven Quality Control tools

• These tools include Pareto analysis, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart

• They are used to analyze data, identify root causes of problems, and make informed decisions for process improvement
Answered by AI
Add your answer
Q2. What is ppl and pplh
Ans. 
PPL stands for Production Per Labour and PPLH stands for Production Per Labour Hour.
• PPL is a measure of how much production is achieved per unit of labor input.

• PPLH is a measure of how much production is achieved per labor hour.

• Both metrics are used to evaluate the efficiency of production processes.

• For example, if a factory produces 100 units with 10 workers, the PPL would be 10 units per worker.

• If the same factory op...read more
Answered by AI
Add your answer

Don't join in this group

Q1. Production work
Add your answer
Q2. Experience Questions
Add your answer
Q3. Technical Questions
Add your answer
Q4. Experience Questions and
Add your answer

Q1. Production Department
Add your answer

Q1. Engineing drawing
Ans. 1st angle and 3rd angle difrrenent
Answered Anonymously
Add your answer
Q2. What is tolarance
Ans. 
Tolerance refers to the acceptable range of variation in a physical dimension or property of a material or product.
• Tolerance is the difference between the maximum and minimum limits of a dimension or property.

• It ensures that parts fit together properly and function as intended.

• Tolerance can be specified as a numerical value or a range, such as +/- 0.1mm.

• Examples include the tolerance for the diameter of a shaft or the
Answered by AI
View 1 more answer
Q3. Micro meter least count
Ans. 
The least count of a micrometer is the smallest measurement that can be read on the scale.
• The least count of a micrometer is typically 0.01mm or 0.001mm depending on the type of micrometer.

• It is determined by the number of divisions on the thimble and the main scale.

• For example, a micrometer with 50 divisions on the thimble and a main scale reading in mm will have a least count of 0.01mm.
Answered by AI
Add your answer
Q4. O.01 least count
Add your answer
Q5. What is fig and fixture
Ans. 
A jig is a type of tool used to control the location and/or motion of another tool. A fixture is a work-holding or support device used in the manufacturing industry.
• Jigs are used to guide cutting tools, while fixtures are used to hold workpieces in place during machining operations.

• Jigs and fixtures are commonly used in manufacturing processes such as welding, drilling, and milling.

• Examples of jigs include drill jigs, ...read more
Answered by AI
Add your answer
Q6. Tool ko guid krta hai and fixture job ko hold krta hai
Add your answer

Q1. What is the difference between motor and generator?
Ans. 
Motors convert electrical energy into mechanical energy, while generators convert mechanical energy into electrical energy.
• Motors use electricity to produce motion, while generators use motion to produce electricity

• Motors have a rotor that spins within a stator, while generators have a rotor that is turned by an external force

• Examples of motors include electric fans and washing machines, while examples of generators in
Answered by AI
Add your answer

Q1. About work experience ?
Add your answer
Q2. About job responsibilities
Add your answer

Q1. What is line balancing?
Ans. 
Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.
• Involves distributing workload evenly among workstations

• Minimizes idle time and bottlenecks

• Improves productivity and efficiency

• Example: In an assembly line, tasks are allocated to different stations to ensure smooth flow of production
Answered by AI
Add your answer
Q2. What is pillars of TPM and it's benefits?
Ans. 
TPM pillars are key principles for Total Productive Maintenance, leading to improved equipment reliability and productivity.
• Pillar 1: Autonomous Maintenance - Involving operators in routine maintenance tasks to prevent breakdowns.

• Pillar 2: Planned Maintenance - Scheduled maintenance activities to keep equipment in optimal condition.

• Pillar 3: Quality Maintenance - Ensuring equipment is capable of producing quality produ...read more
Answered by AI
Add your answer
Q3. What is 5s and explain it?
Ans. 
5s is a methodology used to organize a workplace for efficiency and effectiveness by identifying and storing items used, maintaining the area and items, and sustaining the new order.
• Sort: Separate necessary items from unnecessary ones.

• Set in order: Arrange necessary items in a logical and efficient manner.

• Shine: Clean and inspect the work area regularly.

• Standardize: Establish standards and procedures for maintaining th...read more
Answered by AI
Add your answer
Q4. What is bottlenecks
Ans. 
Bottlenecks are points in a process where the flow of work is impeded or slowed down, causing delays and inefficiencies.
• Bottlenecks can occur due to limited resources, such as equipment or manpower

• Identifying and addressing bottlenecks is crucial for improving overall productivity

• Examples of bottlenecks include a machine that frequently breaks down, causing a backlog in production

• Implementing strategies like cross-trai...read more
Answered by AI
Add your answer