Upload Button Icon Add office photos

Faurecia

Compare button icon Compare button icon Compare

Filter interviews by

Faurecia Production Engineer Interview Questions and Answers

Updated 28 Jun 2024

Faurecia Production Engineer Interview Experiences

2 interviews found

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(1 Question)

  • Q1. What is the difference between motor and generator?
  • Ans. 

    Motors convert electrical energy into mechanical energy, while generators convert mechanical energy into electrical energy.

    • Motors use electricity to produce motion, while generators use motion to produce electricity

    • Motors have a rotor that spins within a stator, while generators have a rotor that is turned by an external force

    • Examples of motors include electric fans and washing machines, while examples of generators in

  • Answered by AI
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed before Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(2 Questions)

  • Q1. Welding related questions
  • Q2. Robot program related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Easy interview friendly employees don't panic doesn't know the answer

Production Engineer Interview Questions Asked at Other Companies

Q1. How to solve the problem in robot means how to detect fault?
asked in Foxconn
Q2. If product a fails in last stage what is root cause ?
Q3. Minimum value measure by vernier caliper?
Q4. difference between mass production and batch production?
Q5. Did you know about soldering and what is the criteria for solderi ... read more

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Oct 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Verbal, logical and communication aptitude test.

Round 3 - One-on-one 

(1 Question)

  • Q1. Face to face is the last round of interview. There the hr will ask basic questions and personal details about the candidate.
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed in Aug 2023. There was 1 interview round.

Round 1 - Technical 

(6 Questions)

  • Q1. Engineing drawing
  • Ans. 1st angle and 3rd angle difrrenent
  • Answered Anonymously
  • Q2. What is tolarance
  • Ans. 

    Tolerance refers to the acceptable range of variation in a physical dimension or property of a material or product.

    • Tolerance is the difference between the maximum and minimum limits of a dimension or property.

    • It ensures that parts fit together properly and function as intended.

    • Tolerance can be specified as a numerical value or a range, such as +/- 0.1mm.

    • Examples include the tolerance for the diameter of a shaft or the

  • Answered by AI
  • Q3. Micro meter least count
  • Ans. 

    The least count of a micrometer is the smallest measurement that can be read on the scale.

    • The least count of a micrometer is typically 0.01mm or 0.001mm depending on the type of micrometer.

    • It is determined by the number of divisions on the thimble and the main scale.

    • For example, a micrometer with 50 divisions on the thimble and a main scale reading in mm will have a least count of 0.01mm.

  • Answered by AI
  • Q4. O.01 least count
  • Q5. What is fig and fixture
  • Ans. 

    A jig is a type of tool used to control the location and/or motion of another tool. A fixture is a work-holding or support device used in the manufacturing industry.

    • Jigs are used to guide cutting tools, while fixtures are used to hold workpieces in place during machining operations.

    • Jigs and fixtures are commonly used in manufacturing processes such as welding, drilling, and milling.

    • Examples of jigs include drill jigs, ...

  • Answered by AI
  • Q6. Tool ko guid krta hai and fixture job ko hold krta hai

Interview Preparation Tips

Interview preparation tips for other job seekers - Good
Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Tell me about yourself
Round 2 - Technical 

(1 Question)

  • Q1. Metal non metal
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed before Mar 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Related to diploma subjects
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(1 Question)

  • Q1. Basic intro about personal
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Aug 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. Self introduction
  • Q2. Why you want to join jtekt
  • Ans. 

    I want to join JTEKT because of their reputation for innovation and commitment to excellence in the production engineering field.

    • JTEKT has a strong reputation for innovation and cutting-edge technology in the production engineering industry.

    • I am impressed by JTEKT's commitment to excellence and continuous improvement in their products and processes.

    • I believe that working at JTEKT will provide me with valuable opportuni...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. What is 7 QC
  • Ans. 

    7 QC is a set of quality control tools used in manufacturing to identify and solve production problems.

    • 7 QC stands for Seven Quality Control tools

    • These tools include Pareto analysis, cause-and-effect diagram, check sheet, control chart, histogram, scatter diagram, and flowchart

    • They are used to analyze data, identify root causes of problems, and make informed decisions for process improvement

  • Answered by AI
  • Q2. What is ppl and pplh
  • Ans. 

    PPL stands for Production Per Labour and PPLH stands for Production Per Labour Hour.

    • PPL is a measure of how much production is achieved per unit of labor input.

    • PPLH is a measure of how much production is achieved per labor hour.

    • Both metrics are used to evaluate the efficiency of production processes.

    • For example, if a factory produces 100 units with 10 workers, the PPL would be 10 units per worker.

    • If the same factory op...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via LinkedIn and was interviewed in Nov 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. How change your previous company
  • Ans. 

    I implemented new production processes and technologies to improve efficiency and quality.

    • Introduced automated systems to streamline production processes

    • Implemented lean manufacturing principles to reduce waste and improve productivity

    • Led training sessions for employees to ensure smooth transition to new processes

    • Collaborated with cross-functional teams to identify areas for improvement

  • Answered by AI
  • Q2. Over experience and filed and achievements
Round 2 - Technical 

(2 Questions)

  • Q1. Question as par roll and documents related
  • Q2. Working and behaviour related

Interview Preparation Tips

Interview preparation tips for other job seekers - Not extra laod on resume and not writing any unnecessary things

I applied via Job Fair and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Case Study 

I am graduation in Mechanical Engineering and also done my diploma mechanical automobile in ghaziabad

Round 2 - HR 

(1 Question)

  • Q1. Tell me about yourself.

Interview Preparation Tips

Interview preparation tips for other job seekers - I am working in denso India pvt Ltd as a line leader in production department in Armature assembly in honda bs 6 model

Faurecia Interview FAQs

How many rounds are there in Faurecia Production Engineer interview?
Faurecia interview process usually has 1-2 rounds. The most common rounds in the Faurecia interview process are Technical and Resume Shortlist.
What are the top questions asked in Faurecia Production Engineer interview?

Some of the top questions asked at the Faurecia Production Engineer interview -

  1. What is the difference between motor and generat...read more
  2. Robot program related questi...read more
  3. Welding related questi...read more

Tell us how to improve this page.

Faurecia Production Engineer Interview Process

based on 2 interviews

Interview experience

4
  
Good
View more
Faurecia Production Engineer Salary
based on 109 salaries
₹1.5 L/yr - ₹6 L/yr
20% less than the average Production Engineer Salary in India
View more details

Faurecia Production Engineer Reviews and Ratings

based on 28 reviews

4.1/5

Rating in categories

4.3

Skill development

4.0

Work-life balance

3.6

Salary

4.1

Job security

4.1

Company culture

3.3

Promotions

4.1

Work satisfaction

Explore 28 Reviews and Ratings
Design Engineer
396 salaries
unlock blur

₹2.4 L/yr - ₹9 L/yr

Senior Design Engineer
333 salaries
unlock blur

₹4.2 L/yr - ₹14.3 L/yr

Product Design Engineer
135 salaries
unlock blur

₹6.5 L/yr - ₹15.3 L/yr

Production Engineer
109 salaries
unlock blur

₹1.5 L/yr - ₹6 L/yr

Senior Engineer
104 salaries
unlock blur

₹5 L/yr - ₹15 L/yr

Explore more salaries
Compare Faurecia with

Bosch

4.2
Compare

Yazaki

3.8
Compare

Valeo

4.0
Compare

Continental Automotive Components

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview