i
Bharat Wire Ropes
Filter interviews by
Top trending discussions
posted on 14 Sep 2024
I applied via Recruitment Consulltant and was interviewed in Aug 2024. There was 1 interview round.
Bachelor's degree in Mechanical Engineering with 5 years of experience in maintenance and troubleshooting of mechanical systems.
Bachelor's degree in Mechanical Engineering
5 years of experience in maintenance and troubleshooting
Proficient in analyzing mechanical systems and implementing solutions
Yes, I am willing to work 12 hours as needed for the job.
I am committed to meeting the demands of the job, including working long hours when necessary.
I understand the importance of completing tasks on time and am willing to put in the extra hours to ensure that.
I have previous experience working long shifts and am comfortable with the schedule.
I am dedicated to my work and will prioritize the job requirements over per
posted on 16 Apr 2024
Various types of cranes are used in mechanical maintenance, including overhead cranes, gantry cranes, jib cranes, and mobile cranes.
Overhead cranes are commonly used in industrial settings for lifting and moving heavy loads.
Gantry cranes are used in shipyards and construction sites for lifting and moving large objects.
Jib cranes are often used in workshops and warehouses for precise lifting and positioning of materials...
Types of loading on bearings include radial load, axial load, and moment load.
Radial load: Load acting perpendicular to the axis of rotation.
Axial load: Load acting parallel to the axis of rotation.
Moment load: Load causing bending or twisting of the bearing.
Combination loading: Bearings may experience a combination of radial, axial, and moment loads.
Examples: Radial load on a wheel bearing, axial load on a thrust bear
The tube mill shaft should undergo heat treatment to improve its strength and durability.
The most common heat treatment for tube mill shafts is quenching and tempering.
Quenching involves heating the shaft to a high temperature and then rapidly cooling it in water or oil to increase its hardness.
Tempering is done after quenching to reduce the brittleness caused by the rapid cooling process.
Other heat treatment methods l...
Pickling process is a metal surface treatment method to remove impurities and improve corrosion resistance.
Pickling is a chemical process used to remove impurities like stains, rust, and scale from metal surfaces.
It involves immersing the metal in an acidic solution, such as hydrochloric acid or sulfuric acid.
The process helps to improve the metal's corrosion resistance and prepare it for further treatments like painti...
In cold rolling mill process, the structure of steel is altered through compression and deformation.
Cold rolling reduces the thickness of steel by compressing it between rollers
This process increases the strength and hardness of the steel
Grain structure of the steel becomes elongated and aligned in the direction of rolling
Cold rolling can also improve the surface finish and dimensional accuracy of the steel
Examples: Co...
Centrifugal pumps work by converting mechanical energy from a motor into kinetic energy to move fluid through the pump.
Centrifugal force is created by the rotation of the pump impeller, which pushes the fluid towards the outer edges of the pump casing.
The kinetic energy of the fluid increases as it moves through the pump, creating pressure that forces the fluid out of the pump discharge.
Centrifugal pumps are commonly u...
Tube mill rolls are typically made of high-quality alloy steel or tool steel, with varying root diameters depending on the specific application.
Tube mill rolls are commonly made of materials such as high-quality alloy steel or tool steel for durability and wear resistance.
The root diameter of tube mill rolls can vary depending on the specific requirements of the milling process.
Examples of tube mill roll materials incl...
Gear box ratio determines the relationship between input and output speeds, while output power is the amount of work done per unit of time.
Gear box ratio is the ratio of the number of teeth on the input gear to the number of teeth on the output gear.
Output power is the product of the force applied and the distance over which the force is applied per unit of time.
For example, if a gear box has a ratio of 2:1 and the inp...
posted on 1 Jun 2024
posted on 26 Dec 2023
I applied via Company Website and was interviewed before Dec 2022. There were 3 interview rounds.
posted on 6 Aug 2021
I applied via Walk-in and was interviewed in Jul 2021. There were 4 interview rounds.
posted on 16 Nov 2021
posted on 8 Mar 2024
I applied via Company Website and was interviewed in Feb 2024. There were 3 interview rounds.
Jsw Steel is a best company
posted on 4 Sep 2023
I applied via Company Website and was interviewed in Aug 2023. There were 3 interview rounds.
posted on 5 May 2023
based on 4 reviews
Rating in categories
Production Engineer
48
salaries
| ₹1.6 L/yr - ₹4.2 L/yr |
Assistant Manager
44
salaries
| ₹4.5 L/yr - ₹8.7 L/yr |
Senior Production Engineer
35
salaries
| ₹3 L/yr - ₹6 L/yr |
Senior Engineer
28
salaries
| ₹3.2 L/yr - ₹5.5 L/yr |
Graduate Engineer Trainee (Get)
27
salaries
| ₹1.8 L/yr - ₹3.2 L/yr |
Usha Martin
Tata Steel
Bekaert Industries
Rope Enterprises