Bharat Wire Ropes Assistant Manager Mechanical Maintenance Interview Questions and Answers

Q1. Diploma Mechanical engineering JE
Ans. 
A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:
Answered Anonymously
Add your answer
Q2. Diploma mechanical engineering supervisor
Ans. 
A three-year course that provides students with the knowledge and skills to design, manufacture, install, and operate engines and machines. Students learn about forces and motion, and subjects include automobile engineering, manufacturing engineering, and power plant engineering.
Answered Anonymously
Add your answer

Q1. Diploma mechanical engineering JE
Ans. 
A Diploma in Mechanical Engineering can prepare students for a career as a Junior Engineer (JE) in the public or private sector:
Answered Anonymously
Add your answer
Q2. Diploma Mechanical engineering supervisor
Add your answer

Q1. Assistant manager
Add your answer
Q2. Assistant incharge
Add your answer

Q1. How to know if Hydraulic cylinder leakage
Ans. 
Check for hydraulic cylinder leakage by inspecting for oil puddles, decreased performance, and abnormal noises.
• Inspect the area around the hydraulic cylinder for oil puddles or stains

• Monitor the performance of the hydraulic system for any decrease in efficiency

• Listen for any abnormal noises coming from the hydraulic cylinder during operation
Answered by AI
Add your answer
Q2. What is NAS
Ans. 
NAS stands for Network Attached Storage, which is a type of storage device that connects to a network to provide shared storage space.
• NAS devices are typically used for storing and sharing files, data backups, and media streaming within a network.

• NAS devices can be accessed by multiple users and devices simultaneously over a network.

• NAS devices often have their own operating system and can run various applications such...read more
Answered by AI
Add your answer

Q1. What are the energy conversion take place in centrifugal pumps?
Ans. 
Energy conversion in centrifugal pumps involves mechanical energy being converted to kinetic energy and then to potential energy.
• Mechanical energy from the motor is converted to kinetic energy in the rotating impeller

• Kinetic energy is then converted to potential energy in the volute casing

• The potential energy is then used to increase the pressure and flow of the fluid being pumped

• Efficiency of the pump is crucial in mi
Answered by AI
Add your answer
Q2. What are the types of pump casing?
Ans. 
Types of pump casing include volute, diffuser, axial flow, and mixed flow.
• Volute casing: spiral-shaped casing that increases the velocity of the fluid

• Diffuser casing: converts kinetic energy into pressure energy

• Axial flow casing: directs the flow of fluid parallel to the axis of rotation

• Mixed flow casing: combines features of both radial and axial flow casings
Answered by AI
Add your answer

Gear box replacement work

Q1. Barring checking and replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and blumber block top cover open and old slue Barring remove and new slue...read more
Ans. 
Blumber block top cover open and old slue Barring remove and new slue Barring replace and nut tightening sure and blumber block top cover fixed and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
Answered Anonymously
Add your answer
Q2. Motor replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old motor remove and new motor replace and bolts nut tightening s...read more
Ans. 
Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and Dayal gauge eliminate process ok and paper work cancelled and conveyer belt running ok
Answered Anonymously
Add your answer
Q3. V-scraper replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old v-scraper remove new v-scraper replace and bolts nut tigh...read more
Add your answer
Q4. Discharge Chute replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old discharge chute remove and new discharge chute repl...read more
Ans. 
Bolt nut open and old discharge chute remove and new discharge chute replace and bolts nut tightening sure and paper work cancelled and conveyer belt running ok
Answered Anonymously
Add your answer
Q5. Barring Greasing work and safety first and all ppes sure and paper work and all pulley checking and savings greasing sure and paper work cancelled
Add your answer
Q6. Gear box replacement work and safety first and all ppes sure and paper work and try out and walked away clean and fresh and bolts nut open and old gear box remove and new gear box replace and bolts nut tig...read more
Add your answer

Q1. What is Hydraulic system and it's components?
Ans. 
A hydraulic system uses fluid to transmit power and consists of components like pumps, cylinders, valves, and hoses.
• Hydraulic pump: generates flow to the hydraulic system

• Hydraulic cylinder: converts fluid power into mechanical power

• Hydraulic valve: controls the flow and pressure of the fluid

• Hydraulic hose: carries the fluid between components
Answered by AI
Add your answer
Q2. Explain steel making process?
Ans. 
Steel making process involves converting iron ore into steel through various stages like smelting, refining, and casting.
• Iron ore is mined and transported to a steel mill.

• The iron ore is smelted in a blast furnace to remove impurities and create molten iron.

• The molten iron is then refined in a basic oxygen furnace or an electric arc furnace to adjust the carbon content and other alloying elements.

• The refined molten iro...read more
Answered by AI
Add your answer

Q1. By Carefully seeing your Resume " What is your family Background?"
Ans. Sir, I am only son of my father. we are 3 member in family and one uncle.
Answered Anonymously
Add your answer
Q2. What are manufacturing process for producing a component?
Ans. 
The manufacturing process for producing a component involves several steps.
• Designing the component

• Material selection

• Machining or forming the raw material

• Assembly of the component

• Quality control and inspection
Answered by AI
Add your answer
Q3. 1. Casting 2.Machining 3.Forming 4.Deep Drawing etc....
Add your answer

Q1. Heat transfer and heat treatment.
Add your answer
Q2. Gear and gearbox, bearing, nozzles
Add your answer
Q3. Metal forming process like casting, rolling.
Add your answer
Q4. About you previous work and responsibilities.
Add your answer
Q5. If possible then try to gain knowledge about steel and its composition.
Add your answer

Q1. About previous work and salaries discussion.
Add your answer

Q1. Mechanical Rolling Mill Related question.
Add your answer

Q1. Question related to quality
Add your answer