Filter interviews by
I appeared for an interview in Apr 2022.
I applied via Campus Placement and was interviewed before Apr 2020. There were 4 interview rounds.
Gears are mechanical components that transmit power and motion between rotating shafts. There are various types of gears.
Spur gears
Helical gears
Bevel gears
Worm gears
Planetary gears
Rack and pinion gears
Gear nomenclature refers to the standardized system of naming and identifying gears.
Gear nomenclature includes terms such as pitch diameter, face width, and pressure angle.
It is important for engineers to understand gear nomenclature in order to properly design and manufacture gears.
The AGMA (American Gear Manufacturers Association) provides guidelines for gear nomenclature.
Examples of gear types include spur gears, he
Instructions are written or spoken directions for carrying out a task or activity.
Instructions provide guidance and clarity on how to perform a task or activity.
They can be written or spoken, and may include diagrams or illustrations.
Instructions are used in various fields, such as manufacturing, construction, and cooking.
They can also be used for assembling products, operating machinery, or performing medical procedur
Gears transmit power and motion between rotating shafts. They change torque, speed, and direction of rotation.
Gears transmit power and motion between rotating shafts
They change torque, speed, and direction of rotation
They can increase or decrease speed and torque
They can change the direction of rotation
Examples include spur gears, bevel gears, worm gears, and helical gears
I applied via Walk-in and was interviewed in Apr 2021. There were 3 interview rounds.
Quality tools are techniques used to improve quality and productivity. Kaizen, 5S, fishbone diagram, and poka yoke are some examples.
Kaizen is a continuous improvement process that involves everyone in the organization.
5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing, and sustaining.
Fishbone diagram is a tool used to identify the root cause of a problem by analyzing its ...
posted on 10 Jan 2022
I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.
TBO stands for Time Between Overhaul in coupler, which is the time interval between two overhauls of a coupler.
TBO is a maintenance term used in the aviation industry.
It refers to the time interval between two overhauls of a coupler.
During an overhaul, the coupler is disassembled, inspected, repaired, and reassembled.
The TBO for a coupler depends on the manufacturer's recommendations and the coupler's usage.
Exceeding t...
I applied via Walk-in and was interviewed in Jan 2021. There were 3 interview rounds.
I applied via Recruitment Consultant and was interviewed in Oct 2020. There were 3 interview rounds.
GD&T symbols are used to specify geometric tolerances on engineering drawings.
GD&T stands for Geometric Dimensioning and Tolerancing
It is a system of symbols used to specify the allowable variation in form and size of features on a part
Examples of GD&T symbols include: flatness, perpendicularity, concentricity, and position
GD&T is important for ensuring parts are manufactured to the correct specifications and fit toget
True position on CMM can be checked using a combination of software and hardware tools.
Use a calibrated probe to measure the feature location
Compare the measured location with the nominal location
Calculate the deviation and compare it with the tolerance
Use software tools like GD&T to analyze the results
Ensure the CMM is calibrated and the probe is in good condition
FMEA stands for Failure Mode and Effects Analysis. It is a systematic approach to identify and prevent potential failures in a process or product.
FMEA is used to identify potential failures in a process or product and their effects on the system.
It involves analyzing the likelihood of failure, severity of the consequences, and the ability to detect the failure before it occurs.
FMEA is commonly used in industries such a...
Instrument selection involves identifying the appropriate tools and equipment for a specific task or process.
Identify the purpose of the instrument
Consider the accuracy and precision required
Evaluate the cost and availability
Ensure the instrument is compatible with other equipment
Consider the maintenance and calibration requirements
I applied via Company Website and was interviewed in Mar 2022. There were 5 interview rounds.
All Quality related multiple questions
Personal interview, confidence
I applied via Walk-in
Aptitude test was taken . Be prepared
posted on 9 Jan 2024
I applied via Naukri.com and was interviewed in Jul 2023. There was 1 interview round.
The least count of a measuring instrument is the smallest value that can be measured by the instrument.
The least count is determined by the smallest division on the scale or the smallest increment the instrument can detect.
It is important to consider the least count when using a measuring instrument to ensure accurate measurements.
For example, a ruler with a least count of 1 mm can measure lengths to the nearest millim...
A quality engineer can understand various types of views from drawings.
Orthographic views: Front, top, and side views of an object.
Isometric views: A 3D representation of an object.
Section views: Show internal details of an object by cutting it.
Detail views: Enlarged views of specific areas of an object.
Auxiliary views: Show the true shape and size of inclined surfaces.
Exploded views: Illustrate the assembly of compone...
8D analysis is a problem-solving method used to identify, correct, and prevent recurring problems.
Define the problem
Form a team
Containment actions
Root cause analysis
Corrective actions
Implement permanent corrective actions
Prevent recurrence
Recognize team efforts
The 7QC tools are a set of quality control tools used for problem-solving and process improvement.
Identify the problem or process to be improved
Collect data related to the problem
Display data visually using tools like histograms or scatter plots
Analyze the data to identify root causes of the problem
Brainstorm and implement solutions
Monitor the results of the implemented solutions
Standardize the process to prevent recur
Warranty parts should be properly documented, tracked, and analyzed to identify trends and improve product quality.
Create a system to track warranty parts including serial numbers, dates, and reasons for return
Analyze warranty parts data to identify common issues and trends
Work with suppliers to address recurring issues and improve product quality
Implement corrective actions based on warranty parts analysis to prevent
Any one past experience for quality issue
based on 17 reviews
Rating in categories
Production Engineer
188
salaries
| ₹1.3 L/yr - ₹5.1 L/yr |
Quality Engineer
108
salaries
| ₹1.4 L/yr - ₹4.5 L/yr |
Production Supervisor
101
salaries
| ₹2.1 L/yr - ₹5.1 L/yr |
Junior Engineer
55
salaries
| ₹1.5 L/yr - ₹3.6 L/yr |
Diploma Mechanical Engineer
54
salaries
| ₹1.6 L/yr - ₹4.5 L/yr |
JBM Group
Subros
Endurance Technologies
Spark Minda