Filter interviews by
I applied via Campus Placement and was interviewed before Oct 2020. There were 5 interview rounds.
The company manufactures a variety of products.
The company produces consumer electronics such as smartphones and laptops.
They also manufacture home appliances like refrigerators and washing machines.
In addition, the company produces industrial equipment such as generators and air compressors.
The company also has a division that produces automotive parts like brakes and suspension systems.
SPC stands for Statistical Process Control. It is a method of quality control that uses statistical methods to monitor and control a process.
SPC involves collecting and analyzing data to identify and reduce variation in a process
It helps to ensure that a process is operating within its specified limits and is capable of producing consistent results
Examples of SPC tools include control charts, histograms, and Pareto cha...
Corrective action is taken to address and resolve existing problems, while preventive action is taken to prevent potential problems from occurring.
Corrective action focuses on addressing and resolving existing problems or nonconformities.
Preventive action focuses on identifying and eliminating potential problems before they occur.
Corrective action is reactive, while preventive action is proactive.
Corrective action aims...
I am a detail-oriented Quality Engineer with a passion for continuous improvement and problem-solving.
Detail-oriented with a focus on quality standards
Passionate about continuous improvement
Skilled in problem-solving and root cause analysis
The steps for demin wheels involve cleaning, inspecting, repairing, and testing.
Clean the wheels thoroughly to remove any dirt or debris.
Inspect the wheels for any damage or defects.
Repair any issues found, such as replacing worn-out parts or fixing cracks.
Test the wheels to ensure they meet quality standards and perform as expected.
Hardness is the measure of a material's resistance to indentation or scratching.
Hardness is a property of materials that determines their ability to withstand deformation
It is often measured using tests like the Rockwell, Brinell, or Vickers hardness tests
Hardness can be influenced by factors such as the material's composition, heat treatment, and microstructure
Higher hardness generally indicates greater strength and d...
To upgrade suppliers, establish clear quality standards, conduct regular audits, provide feedback and support for improvement, and consider alternative suppliers.
Establish clear quality standards and communicate them to suppliers
Conduct regular audits to assess supplier performance and identify areas for improvement
Provide feedback and support to suppliers to help them meet quality standards
Consider alternative supplie...
Supplier selection criteria are the factors and considerations used to evaluate and choose suppliers for a company's procurement needs.
Quality and reliability of products or services
Supplier's financial stability and ability to meet demand
Supplier's track record and reputation
Cost and pricing
Supplier's location and proximity to the company
Supplier's compliance with industry standards and regulations
Supplier's capacity ...
posted on 9 Oct 2021
I applied via Recruitment Consultant and was interviewed before Oct 2020. There was 1 interview round.
Seven QC tools are a set of basic quality control tools used to identify and solve quality problems.
Check sheets
Control charts
Histograms
Pareto charts
Scatter diagrams
Stratification
Cause-and-effect diagrams
I applied via Walk-in and was interviewed in Apr 2021. There were 3 interview rounds.
Quality tools are techniques used to improve quality and productivity. Kaizen, 5S, fishbone diagram, and poka yoke are some examples.
Kaizen is a continuous improvement process that involves everyone in the organization.
5S is a workplace organization method that involves sorting, simplifying, sweeping, standardizing, and sustaining.
Fishbone diagram is a tool used to identify the root cause of a problem by analyzing its ...
posted on 10 Jan 2022
I applied via Walk-in and was interviewed in Jul 2021. There was 1 interview round.
TBO stands for Time Between Overhaul in coupler, which is the time interval between two overhauls of a coupler.
TBO is a maintenance term used in the aviation industry.
It refers to the time interval between two overhauls of a coupler.
During an overhaul, the coupler is disassembled, inspected, repaired, and reassembled.
The TBO for a coupler depends on the manufacturer's recommendations and the coupler's usage.
Exceeding t...
I applied via Walk-in and was interviewed in Jan 2021. There were 3 interview rounds.
I applied via Naukri.com and was interviewed before Oct 2021. There were 2 interview rounds.
I applied via Referral and was interviewed before Apr 2021. There were 3 interview rounds.
Gs, reasoning, general apptitude
Measuring instruments have a least count that determines the smallest measurement that can be taken.
Least count is the smallest measurement that can be taken with a measuring instrument
It is determined by the instrument's precision and accuracy
For example, a ruler with a least count of 1 mm can measure to the nearest millimeter
Materials used in the instrument's construction can affect its accuracy and precision
I would expect a salary that is competitive for the industry and reflects my experience and qualifications.
Research industry standards and salary ranges for Quality Engineers
Consider your level of experience and qualifications
Factor in the location and cost of living
Be prepared to negotiate and discuss benefits and perks
I worked as a Quality Engineer at XYZ Company.
Implemented quality control procedures to ensure product compliance with industry standards.
Conducted regular audits and inspections to identify and resolve quality issues.
Collaborated with cross-functional teams to develop and implement corrective actions.
Utilized statistical analysis tools to analyze data and identify trends for process improvement.
Developed and maintaine...
My strengths include attention to detail, problem-solving skills, and strong analytical abilities. My weaknesses include being overly critical of my own work and sometimes struggling with delegation.
Strength: Attention to detail - I have a keen eye for identifying even the smallest errors or inconsistencies.
Strength: Problem-solving skills - I enjoy analyzing complex problems and finding effective solutions.
Strength: S...
I am a Quality Engineer with experience in ensuring product quality and implementing quality control processes.
Experienced Quality Engineer
Skilled in ensuring product quality
Proficient in implementing quality control processes
Strong attention to detail
Knowledge of quality standards and regulations
Effective problem-solving and analytical skills
I applied via Referral and was interviewed in Nov 2023. There was 1 interview round.
The least count of a CMM (Coordinate Measuring Machine) is the smallest increment that can be measured by the machine.
The least count of a CMM is typically determined by the resolution of its measuring system.
For example, if a CMM has a resolution of 0.001 mm, then its least count would be 0.001 mm.
The least count is important for ensuring accurate and precise measurements in quality control processes.
Chemical properties refer to the behavior of materials in different chemical environments, while mechanical properties refer to how materials respond to applied forces.
Chemical properties include corrosion resistance, chemical stability, and reactivity with other substances.
Mechanical properties include strength, hardness, ductility, and toughness.
Different grades of casting materials will have varying chemical and mec...
based on 2 reviews
Rating in categories
Production Engineer
188
salaries
| ₹1.3 L/yr - ₹5.1 L/yr |
Quality Engineer
108
salaries
| ₹1.4 L/yr - ₹4.5 L/yr |
Production Supervisor
101
salaries
| ₹2.1 L/yr - ₹5.1 L/yr |
Junior Engineer
55
salaries
| ₹1.5 L/yr - ₹3.6 L/yr |
Diploma Mechanical Engineer
54
salaries
| ₹1.6 L/yr - ₹4.5 L/yr |
JBM Group
Subros
Spark Minda
Gabriel India