Filter interviews by
I applied via Recruitment Consulltant and was interviewed before Aug 2023. There were 2 interview rounds.
GPRS & GSM commands are used in communication systems for sending and receiving data wirelessly.
GPRS commands are used for data transmission over mobile networks.
GSM commands are used for voice calls and text messaging over mobile networks.
Examples of GPRS commands: AT+CGDCONT, AT+CGATT
Examples of GSM commands: ATD (dial), ATA (answer), AT+CMGS (send SMS)
Various protocols used in automation include Modbus, Profibus, Ethernet/IP, and DeviceNet.
Modbus: Widely used for serial communication between devices in industrial automation.
Profibus: Commonly used in process automation for communication between field devices and controllers.
Ethernet/IP: Utilized for real-time control and information sharing in industrial automation.
DeviceNet: Used for connecting industrial devices i
SLD diagram, or Single Line Diagram, is a simplified representation of a power system showing the electrical connections and components.
SLD diagrams show the flow of electricity through a system using single lines to represent conductors and symbols for components.
They are used for planning, designing, and analyzing power systems.
Common components shown on SLD diagrams include transformers, circuit breakers, switches, ...
Different types of networking switches include managed, unmanaged, layer 2, layer 3, modular, and stackable switches.
Managed switches allow for more control and customization of network settings.
Unmanaged switches are plug-and-play devices with no configuration options.
Layer 2 switches operate at the data link layer and use MAC addresses for forwarding.
Layer 3 switches operate at the network layer and use IP addresses ...
IoT (Internet of Things) is the network of physical devices embedded with sensors, software, and other technologies to connect and exchange data.
IoT is used in smart homes to control appliances remotely.
IoT is used in agriculture for monitoring soil conditions and crop health.
IoT is used in healthcare for remote patient monitoring and wearable devices.
IoT is used in manufacturing for predictive maintenance of machinery...
There are three main types of solar panels: monocrystalline, polycrystalline, and thin-film, each with varying levels of efficiency.
Monocrystalline solar panels are the most efficient and space-efficient, made from single-crystal silicon.
Polycrystalline solar panels are less expensive but slightly less efficient, made from multiple silicon crystals.
Thin-film solar panels are the least efficient but the most flexible an...
Analyzing the public relations impact of a solar plant project.
Evaluate media coverage and public perception of the solar plant project.
Assess the effectiveness of communication strategies in promoting the benefits of the solar plant.
Analyze stakeholder feedback and community engagement initiatives.
Monitor social media sentiment and online discussions related to the solar plant.
Identify any potential PR challenges or c
Increasing PR value can be achieved through strategic communication, media relations, and community engagement.
Develop a comprehensive PR strategy that aligns with the company's goals and values
Build relationships with key media outlets and journalists to secure positive coverage
Engage with the community through events, sponsorships, and partnerships
Utilize social media and digital platforms to amplify PR efforts
Monito...
A PPC controller is used in power plants to regulate the output of generators and maintain grid stability.
PPC controllers use various methods such as droop control, PID control, and model predictive control.
Droop control adjusts the generator output based on the frequency deviation from the nominal value.
PID control uses proportional, integral, and derivative terms to adjust the generator output.
Model predictive contro...
Transformer types include step-up, step-down, isolation, and autotransformers. Losses include copper losses and iron losses.
Transformer types: step-up, step-down, isolation, autotransformers
Losses: copper losses, iron losses
Calculation of losses involves determining the resistance of the copper windings and the core losses due to hysteresis and eddy currents
SLDC (System Development Life Cycle) is a process used in software development to plan, design, build, test, and deploy a system.
SLDC helps in ensuring that the final product meets the requirements and is of high quality.
It involves phases like planning, analysis, design, implementation, testing, and maintenance.
Examples of SLDC models include Waterfall, Agile, Spiral, and V-Model.
SLDC is used in various industries for...
EMS analysis involves evaluating and utilizing data from emergency medical services for improving patient care and system efficiency.
EMS analysis involves examining response times, patient outcomes, resource allocation, and system performance.
Data collected from EMS can be used to identify trends, assess the effectiveness of protocols, and make informed decisions for improvement.
Examples of EMS analysis include studyin...
Transformers are devices used to transfer electrical energy between two or more circuits through electromagnetic induction.
Types of transformers include step-up, step-down, isolation, autotransformer, and distribution transformers.
Step-up transformers increase voltage for long-distance transmission, while step-down transformers decrease voltage for household use.
Isolation transformers provide electrical isolation betwe...
Transformer loss calculation involves determining the copper losses and iron losses in the transformer.
Calculate copper losses by using the formula: P_copper = I^2 * R, where I is the current flowing through the transformer and R is the resistance of the winding.
Calculate iron losses by using the formula: P_iron = V^2 / R, where V is the voltage across the transformer winding and R is the resistance of the winding.
Tota...
Types of solar plants include photovoltaic, concentrated solar power, and solar thermal. Solar panels can be monocrystalline, polycrystalline, or thin-film.
Types of solar plants: photovoltaic, concentrated solar power, solar thermal
Types of solar panels: monocrystalline, polycrystalline, thin-film
Applications: residential, commercial, utility-scale
Examples: Ivanpah Solar Power Facility (concentrated solar power), Solar...
WMS sensors are used for monitoring and controlling warehouse operations.
WMS sensors track inventory levels in real-time
They can detect temperature and humidity levels in storage areas
Some sensors monitor equipment performance for preventive maintenance
Examples include RFID sensors for tracking pallets and barcode scanners for inventory management
SLDC stands for State Load Dispatch Center. It is an organization responsible for real-time monitoring and control of the power system within a specific region.
SLDCs ensure grid stability by balancing power generation and consumption in real-time.
They coordinate with power plants, transmission companies, and distribution utilities to maintain grid reliability.
SLDCs use advanced technologies like SCADA systems to monito...
I applied via Referral and was interviewed before Aug 2021. There were 3 interview rounds.
The expected hike is based on performance and market trends.
The hike is determined by individual performance and contribution to the company.
Market trends and industry standards also play a role in determining the hike.
The company has a structured performance review process to evaluate employee performance.
The hike percentage may vary based on the employee's position and level of experience.
We do not disclose specific ...
Belectric Photovoltaic interview questions for popular designations
I applied via Referral and was interviewed in Mar 2021. There were 3 interview rounds.
TDS stands for Tax Deducted at Source, which is a tax collection mechanism in India.
TDS is a tax that is deducted from the income of an individual or a company at the time of payment.
It is deducted by the payer and deposited with the government on behalf of the payee.
TDS is applicable on various types of income such as salary, interest, rent, commission, etc.
The rate of TDS varies depending on the type of income and th...
GST stands for Goods and Services Tax. It is a value-added tax levied on the supply of goods and services in India.
GST was implemented in India on July 1, 2017
It replaced multiple indirect taxes like VAT, excise duty, service tax, etc.
GST has 4 tax slabs - 5%, 12%, 18%, and 28%
GST has helped in simplifying the tax structure and reducing tax evasion
GST has also led to the creation of a unified market across India
Top trending discussions
posted on 11 Feb 2025
posted on 27 Aug 2024
I applied via Walk-in and was interviewed in Jul 2024. There were 2 interview rounds.
I had a test on AutoCad Software, they provided a Solar design to draw.
posted on 7 Apr 2023
I applied via Referral and was interviewed before Apr 2022. There were 2 interview rounds.
I applied via Walk-in and was interviewed before Nov 2023. There were 2 interview rounds.
Interpreting SAP software data involves analyzing and understanding the information provided by the system.
Understand the data structure and fields within SAP software
Use reporting tools to extract and analyze data
Identify trends, patterns, and anomalies in the data
Interpret data in the context of business objectives and goals
Collaborate with stakeholders to ensure accurate interpretation
Line balancing is the process of assigning tasks to workstations in a way that evens out the workload and maximizes efficiency.
Involves distributing work evenly among workstations
Helps in reducing idle time and increasing productivity
Ensures that no workstation is overloaded while others are underutilized
Commonly used in manufacturing processes like assembly lines
The T-Code in SAP for Production Order Information is CO03.
T-Code CO03 is used to display production order information in SAP.
It provides details such as order status, components, operations, and dates.
Users can access CO03 by entering the transaction code in the SAP command field.
V Lookup searches for a value in a table and returns a corresponding value, while SUM IF adds up values based on a given condition.
V Lookup searches for a value in the first column of a table and returns a value in the same row from a specified column.
SUM IF function adds up values in a range that meet a specific condition.
Example: V Lookup - =VLOOKUP(A2, Sheet2!A1:B100, 2, FALSE) will search for the value in cell A2 i...
MRP stands for Material Requirements Planning, which is a system used for planning and managing inventory levels. MPS stands for Master Production Schedule, which is a detailed plan for production.
MRP focuses on determining the materials needed for production based on demand forecasts and inventory levels.
MPS focuses on creating a detailed schedule for production activities, including specific quantities and timing of ...
LTP stands for Long-Term Planning. Strategy 40 in SAP PP Module is used for planning production based on long-term demand forecasts.
LTP in SAP PP Module helps in creating long-term production plans based on demand forecasts
Strategy 40 specifically focuses on planning production for long-term demand
It involves setting up parameters such as planning horizon, forecast consumption, and safety stock levels
Example: Using Str...
The expectation of package for a PPC Executive typically includes competitive salary, benefits, and potential for bonuses.
Competitive salary based on experience and skills
Benefits such as health insurance, retirement plans, and paid time off
Potential for bonuses based on performance and campaign success
based on 1 interview
Interview experience
based on 50 reviews
Rating in categories
Assistant Manager
20
salaries
| â‚ą5.5 L/yr - â‚ą9 L/yr |
Deputy Manager
6
salaries
| â‚ą8.5 L/yr - â‚ą11 L/yr |
Electrical Engineer
6
salaries
| â‚ą3.1 L/yr - â‚ą6.6 L/yr |
Junior Manager
6
salaries
| â‚ą4.5 L/yr - â‚ą7 L/yr |
Electrical Site Engineer
6
salaries
| â‚ą4 L/yr - â‚ą6.2 L/yr |
Adani Green Energy
Azure Power
Vikram Solar
Waaree Energies