Premium Employer

i

This company page is being actively managed by M E Energy Team. If you also belong to the team, you can get access from here

M E Energy Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

M E Energy Graduate Trainee Interview Questions, Process, and Tips

Updated 11 Feb 2025

Top M E Energy Graduate Trainee Interview Questions and Answers

M E Energy Graduate Trainee Interview Experiences

2 interviews found

Interview experience
3
Average
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. What are different types of heat transfer process and equations
  • Ans. 

    Different types of heat transfer include conduction, convection, and radiation, each governed by specific equations.

    • Conduction: Heat transfer through a material without any movement of the material itself. Governed by Fourier's Law of Heat Conduction.

    • Convection: Heat transfer through a fluid (liquid or gas) due to the movement of the fluid. Governed by Newton's Law of Cooling.

    • Radiation: Heat transfer through electromag...

  • Answered by AI
  • Q2. What are the Different types of boilers
  • Ans. 

    Different types of boilers include fire tube boilers, water tube boilers, and electric boilers.

    • Fire tube boilers have hot gases flowing through tubes that are surrounded by water

    • Water tube boilers have water flowing through tubes that are heated by hot gases

    • Electric boilers use electricity to generate heat instead of burning fuel

  • Answered by AI
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Types of heat transfer
  • Ans. 

    Types of heat transfer include conduction, convection, and radiation.

    • Conduction: Heat transfer through direct contact between particles, such as a metal spoon heating up in a hot drink.

    • Convection: Heat transfer through the movement of fluids, such as boiling water in a pot.

    • Radiation: Heat transfer through electromagnetic waves, such as the sun warming the Earth.

  • Answered by AI
  • Q2. Heat transfer in Tea Cup
  • Ans. 

    Heat transfer in a tea cup involves conduction from the hot liquid to the cup, convection as the liquid circulates, and radiation from the cup to the surroundings.

    • Conduction: Heat is transferred from the hot tea to the cup through direct contact.

    • Convection: As the tea circulates in the cup, heat is distributed throughout.

    • Radiation: The cup emits heat to the surroundings, cooling down the tea.

    • Material of the cup affects...

  • Answered by AI

Graduate Trainee Interview Questions Asked at Other Companies

asked in Flipkart
Q1. Given an array, how do you get the count of pairs that sum to eve ... read more
asked in Freshworks
Q2. Invert a Binary Tree You are provided with a Binary Tree and one ... read more
asked in Freshworks
Q3. Merge Two Sorted Arrays Problem Statement Given two sorted intege ... read more
asked in Freshworks
Q4. Deepest Left Leaf Node Problem Statement You are provided with a ... read more
asked in TCS
Q5. Consonant Counting Problem Statement Given a string STR comprisin ... read more

Interview questions from similar companies

Interview Questionnaire 

8 Questions

  • Q1. They ask me about my favourite topic
  • Q2. My favourite topics were induction,synchronous machine and tranformer
  • Q3. Difference between working principles of these machines,requirements,efficiency formulas
  • Ans. 

    The working principles, requirements, and efficiency formulas of machines vary depending on their type and purpose.

    • Working principles: Machines can operate based on mechanical, electrical, hydraulic, or pneumatic principles.

    • Requirements: Machines may require power sources, specific operating conditions, maintenance, and safety measures.

    • Efficiency formulas: Different machines have specific efficiency formulas based on t...

  • Answered by AI
  • Q4. Supply methods etc
  • Q5. Tell me about yourself
  • Q6. Your idol
  • Q7. How u can help us
  • Q8. What is urs big achievements

Interview Preparation Tips

Round: Test
Experience: Ques. were easy ,there is no requirement of extra preparation.all the questions include only basic idea.
Tips: First of all solve the tech. section than apti .after that image rotation ,after that logical reasoning and at last verbal
Duration: 75 minutes
Total Questions: 100

Round: Group Discussion
Experience: That' was good
Tips: Only 8 members were selected for GD round. we already decided before the gd ,everyone will speak only for two minutes and we did the same thing.seeing the our team work ,panel members were very impressed and there was no elimination.

Round: Technical Interview
Experience: That's was good
Tips: Only tell your favourite topics ,in which you have urs commands and knows the basic ideas about that topics.
If u not able to give the answer ,don't try to give wrong answer ,instead of giving wrong answer simply say sorry .

Round: HR Interview
Experience: I was happy and it was not so lengthy .
Tips: Don't try to be over smart.

College Name: NIT SURAT

I applied via Campus Placement and was interviewed before Sep 2019. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Basic accounting, Something related to budget or general awareness, costing related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident . Whatever will happen in that room will be confidential to limited people. Don't panic, don't let your unwanted thoughts makes you look under confident. It's not the only company there will be many to come.

Have some basic knowledge based on your stream tha will be enough if you're a beginner.

All the best.

Interview Questionnaire 

1 Question

  • Q1. MS-Excel, MS-Access, Communication Skill
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Referral and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is capacitor
  • Ans. 

    A capacitor is an electronic component that stores and releases electrical energy in a circuit.

    • Capacitors are used to filter out noise in electronic circuits.

    • They can also be used to store energy in flash cameras.

    • Capacitors are measured in Farads (F).

  • Answered by AI
  • Q2. What is pcb and how to assemble
  • Ans. 

    PCB stands for Printed Circuit Board, it is a board made of non-conductive material with conductive tracks for electronic components.

    • PCB is used to mechanically support and electrically connect electronic components using conductive pathways.

    • Components are soldered onto the PCB to create a functional electronic circuit.

    • PCB assembly involves placing components on the board, soldering them in place, and testing the circu...

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before May 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

There were 120 question

Round 2 - Technical 

(1 Question)

  • Q1. Question were from computer networks and AI

Interview Preparation Tips

Interview preparation tips for other job seekers - If you want to come to a core organisation then only you can choose Adani Solar
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Test is about 1 hr and it contains 40 mcqs(both aptitude and coding)

Round 2 - Technical 

(2 Questions)

  • Q1. Level order traversal of binary tree
  • Ans. 

    Level order traversal of binary tree visits nodes level by level, from left to right.

    • Use a queue to keep track of nodes at each level

    • Start by pushing the root node into the queue

    • While the queue is not empty, dequeue a node, visit it, and enqueue its children

  • Answered by AI
  • Q2. Question related to OOPS concepts

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Jan 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Change the odd bits in the binary form of a given number and convert the new binary into decimal form
  • Ans. 

    To change the odd bits in a binary number, flip the bits at odd positions and convert the new binary number to decimal form.

    • Start by converting the given number into binary form.

    • Identify the odd bits in the binary number (counting from right to left, starting at 1).

    • Flip the odd bits by changing 1s to 0s and 0s to 1s.

    • Convert the new binary number into decimal form.

    • For example, if the given number is 13 (binary 1101), th...

  • Answered by AI
  • Q2. Primary vs secondary memory
  • Ans. 

    Primary memory is volatile and directly accessible by the CPU, while secondary memory is non-volatile and used for long-term storage.

    • Primary memory is faster but has limited capacity, while secondary memory is slower but has larger capacity.

    • Examples of primary memory include RAM and cache memory, while examples of secondary memory include hard drives and SSDs.

    • Primary memory stores data that is currently being used by t...

  • Answered by AI

Skills evaluated in this interview

Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Technical 

(2 Questions)

  • Q1. Find out the second largest integer in an array
  • Ans. 

    Find the second largest integer in an array of strings

    • Convert the strings in the array to integers

    • Sort the integers in descending order

    • Return the second element in the sorted array as the second largest integer

  • Answered by AI
  • Q2. Reverse a string
  • Ans. 

    Reverse a string by iterating through the characters and swapping them

    • Create a function that takes a string as input

    • Initialize two pointers, one at the beginning and one at the end of the string

    • Swap the characters at the two pointers and move them towards the center until they meet

  • Answered by AI

Skills evaluated in this interview

Contribute & help others!
anonymous
You can choose to be anonymous

M E Energy Interview FAQs

How many rounds are there in M E Energy Graduate Trainee interview?
M E Energy interview process usually has 1 rounds. The most common rounds in the M E Energy interview process are Technical.
What are the top questions asked in M E Energy Graduate Trainee interview?

Some of the top questions asked at the M E Energy Graduate Trainee interview -

  1. What are different types of heat transfer process and equati...read more
  2. What are the Different types of boil...read more
  3. Types of heat trans...read more

Recently Viewed

JOBS

Browse jobs

Discover jobs you love

COMPANY BENEFITS

KNR Constructions

20 benefits

COMPANY BENEFITS

IRB Infrastructure

60 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

COMPANY BENEFITS

Dilip Buildcon

304 benefits

INTERVIEWS

Hilti

No Interviews

INTERVIEWS

MasterCard

No Interviews

INTERVIEWS

JBM Group

No Interviews

INTERVIEWS

Airproducts

No Interviews

INTERVIEWS

JBM Group

No Interviews

Tell us how to improve this page.

M E Energy Graduate Trainee Interview Process

based on 2 interviews

Interview experience

3.5
  
Good
View more
Join M E Energy Energy Systems - Perfectly Customized
Assistant Manager
11 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Principal Engineer
10 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Production Engineer
8 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Lead Engineer
6 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Project Engineer
5 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare M E Energy with

Thermax Limited

4.1
Compare

Kirloskar Brothers

3.8
Compare

BHEL

4.1
Compare

Suzlon Group

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview
Rate your experience using AmbitionBox
Terrible
Terrible
Poor
Poor
Average
Average
Good
Good
Excellent
Excellent