AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
i
M E Energy
Compare
Filter interviews by
M E Energy Lead Engineer Interview Questions, Process, and Tips
Top M E Energy Lead Engineer Interview Questions and Answers
- Q1. What are design parameters for heat exchangers ?
- Q2. How do you select tube od?
- Q3. How do you select pump?
M E Energy Lead Engineer Interview Experiences
2 interviews found
sagar kadam
Selected
I was interviewed before Feb 2024.
(1 Question)
- Q1. What are the types of welding?
- Ans.
Types of welding include MIG, TIG, stick, and flux-cored welding.
MIG welding (Metal Inert Gas) uses a wire electrode and shielding gas to join metal.
TIG welding (Tungsten Inert Gas) uses a tungsten electrode and filler rod with shielding gas.
Stick welding (Shielded Metal Arc Welding) uses a flux-coated electrode to create the weld.
Flux-cored welding uses a tubular wire electrode with flux inside to shield the weld.
Anonymous
I applied via Company Website and was interviewed in Mar 2021. There was 1 interview round.
Interview Questionnaire
3 Questions
- Q1. How do you select tube od?
- Ans.
Tube OD selection depends on factors such as fluid flow rate, pressure, and material compatibility.
Consider fluid flow rate and pressure to determine appropriate tube OD
Ensure compatibility of tube material with fluid being transported
Consult industry standards and guidelines for recommended tube OD sizes
Factor in any space constraints or installation requirements
Perform testing and analysis to verify tube OD selection
- Q2. How do you select pump?
- Ans.
Pump selection depends on the fluid properties, flow rate, head, and system requirements.
Determine the fluid properties such as viscosity, density, and corrosiveness.
Calculate the required flow rate and head based on the system requirements.
Consider the pump type such as centrifugal, positive displacement, or axial flow.
Choose the appropriate pump size and material based on the fluid properties and system requirements.
...
- Q3. What are design parameters for heat exchangers ?
- Ans.
Design parameters for heat exchangers include heat transfer rate, pressure drop, material selection, and flow arrangement.
Heat transfer rate: determines the efficiency of the heat exchanger
Pressure drop: affects the flow rate and energy consumption
Material selection: depends on the fluid properties and operating conditions
Flow arrangement: affects the heat transfer rate and pressure drop
Interview Preparation Tips
Lead Engineer Jobs at M E Energy
Interview questions from similar companies
I applied via Naukri.com and was interviewed before Aug 2021. There were 2 interview rounds.
(1 Question)
- Q1. Technical questions about power system was discussed
Interview Preparation Tips
Interview Questionnaire
1 Question
- Q1. All questions related electrical project cause my previous job in distribution project .& Also some questions related transformer and losses .
Aptitude Questions ,General Math Reasoning General English , Conceptual Questions based on software Engineering
(1 Question)
- Q1. Why we should Hire You
Selected
I applied via Campus Placement and was interviewed before Jul 2023. There was 1 interview round.
In apti test there 2 setion one is technical and an otherone is non technical.
Interview Preparation Tips
I applied via Approached by Company and was interviewed in May 2024. There was 1 interview round.
(4 Questions)
- Q1. Experience details
- Q2. How outages for line / switchyard is taken, wrt load dispatch centre
- Ans.
Outages for line/switchyard are managed by the load dispatch centre through coordination and communication.
Outages are scheduled in advance to minimize impact on the grid and consumers.
Load dispatch centre coordinates with the concerned authorities to plan and execute the outage.
Alternative arrangements are made to ensure continuity of power supply during the outage.
Regular updates are provided to stakeholders regardin...
- Q3. What is importance of having double bus system
- Ans.
Double bus system is important for ensuring redundancy and reliability in power distribution.
Enhances reliability by providing backup in case of failure in one bus
Allows for maintenance work to be carried out on one bus while the other remains operational
Reduces the risk of power outages and downtime
Commonly used in critical infrastructure such as hospitals, data centers, and industrial facilities
- Q4. Which is the majour fault attended by you in your current job
Interview Preparation Tips
I applied via Campus Placement
Prepare aptitude as we are generally prepare for Competitive exam.
Focus on Maths and English.
(2 Questions)
- Q1. Prepare all the basics Technical questions for the respective subject for which trade you are applying.
- Q2. Always be confident and honest about your answer. If you don't know the answer, accept it & try to manage diplomatically. Don't be fake.
(1 Question)
- Q1. All the basics HS questions like your introduction and some hypothetical situation you may receive from the HR.
Interview Preparation Tips
Interview Questionnaire
3 Questions
- Q1. 1.What is the contact resistance of VCB.?
- Ans.
The contact resistance of VCB is typically very low.
VCB stands for Vacuum Circuit Breaker.
The contact resistance is the resistance between the contacts of the breaker when it is closed.
The contact resistance of VCB is typically in the range of micro-ohms.
Low contact resistance is important for efficient operation of the breaker.
High contact resistance can cause overheating and damage to the breaker.
The contact resistan...
- Q2. What is the resistance value of tripping & closing coil of vcb?
- Ans.
The resistance value of tripping & closing coil of VCB varies depending on the manufacturer and model.
The resistance value can be found in the manufacturer's manual or datasheet.
It is important to use the correct resistance value to ensure proper functioning of the VCB.
The resistance value may also vary depending on the voltage rating of the VCB.
For example, the ABB VD4 VCB has a tripping coil resistance of 50-60 ohms
- Q3. The minimum hight at which the safety belt should be used
- Ans.
The minimum height at which the safety belt should be used is determined by the height of the individual and the specific safety regulations in place.
The minimum height requirement for safety belt usage varies depending on the country and jurisdiction.
In the United States, for example, the minimum height for safety belt usage is typically around 4 feet 9 inches (145 cm).
Other factors such as age, weight, and type of ve...
I applied via Naukri.com and was interviewed in Apr 2021. There were 4 interview rounds.
Interview Questionnaire
1 Question
- Q1. As per your job profile which is you included in your CV
Interview Preparation Tips
M E Energy Interview FAQs
Tell us how to improve this page.
M E Energy Interviews By Designations
- M E Energy Principal Engineer Interview Questions
- M E Energy Lead Engineer Interview Questions
- M E Energy Assistant Manager Interview Questions
- M E Energy Graduate Trainee Interview Questions
- M E Energy Lead Project Engineer Interview Questions
- M E Energy Logistics Executive Interview Questions
- M E Energy Process Engineer Interview Questions
- M E Energy Factory Manager Interview Questions
- Show more
Interview Questions for Popular Designations
- Technical Lead Interview Questions
- Project Lead Interview Questions
- Lead Consultant Interview Questions
- Module Lead Interview Questions
- Senior Technical Lead Interview Questions
- Product Engineer Interview Questions
- Principal Engineer Interview Questions
- Lead Business Analyst Interview Questions
- Show more
M E Energy Lead Engineer Interview Process
based on 2 interviews
Interview experience
Interview Questions from Similar Companies
M E Energy Lead Engineer Reviews and Ratings
based on 3 reviews
Rating in categories
|
Assistant Manager
11
salaries
|  ₹0 L/yr - ₹0 L/yr |
|
Principal Engineer
10
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Production Engineer
9
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Lead Engineer
6
salaries
| ₹0 L/yr - ₹0 L/yr |
|
Project Engineer
5
salaries
| ₹0 L/yr - ₹0 L/yr |
Thermax Limited
Kirloskar Brothers
BHEL
Suzlon Group
- Home >
- Interviews >
- M E Energy Interview Questions >
- M E Energy Lead Engineer Interview Questions
