Filter interviews by
Two types of petrol engines are two-stroke and four-stroke engines. They differ in their working cycle and efficiency.
Two-stroke engines complete a power cycle in one revolution of the crankshaft, while four-stroke engines complete it in two revolutions.
Two-stroke engines have a simpler design and are lighter, but they are less fuel-efficient and produce more emissions.
Four-stroke engines are more complex but more effi...
Governor and radiator are two different components in a machine.
Governor is a device used to regulate the speed of an engine or machine by controlling the fuel or steam supply.
Radiator is a heat exchanger used to transfer thermal energy from one medium to another for cooling or heating purposes.
Governors are commonly used in steam engines, turbines, and internal combustion engines.
Radiators are commonly used in automob...
posted on 16 May 2020
I applied via Walk-in and was interviewed before May 2019. There was 1 interview round.
The 5 engine part names are piston, cylinder, crankshaft, camshaft, and valve.
Piston: Moves up and down inside the cylinder to compress the fuel-air mixture.
Cylinder: Houses the piston and allows for the combustion process.
Crankshaft: Converts the linear motion of the piston into rotational motion.
Camshaft: Controls the opening and closing of the engine's valves.
Valve: Regulates the flow of fuel-air mixture and exhaust
1st and 3rd angle methods are used in engineering drawings to represent the orientation of an object in 3D space.
1st angle method is commonly used in Europe and Asia, while 3rd angle method is used in North America.
In 1st angle method, the object is placed in the first quadrant of the viewing plane, while in 3rd angle method, it is placed in the third quadrant.
The symbol for 1st angle projection is a square with a dot ...
I applied via Campus Placement and was interviewed before Feb 2020. There were 5 interview rounds.
The interview covered topics such as differences between petrol and diesel engines, laws of thermodynamics, types of fluids, and DC motor working.
Petrol engines use spark plugs to ignite fuel, while diesel engines use compression to ignite fuel
The first law of thermodynamics states that energy cannot be created or destroyed, only transferred or converted
Fluids can be classified as liquids, gases, or plasmas
My hobbies i...
I applied via Recruitment Consultant and was interviewed before Dec 2019. There was 1 interview round.
5S is a methodology used to organize and maintain a clean, efficient, and safe work environment.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.
Sort involves removing unnecessary items from the workplace.
Set in Order focuses on arranging necessary items in a logical and efficient manner.
Shine involves cleaning and maintaining the workplace.
Standardize establishes consistent processes and procedures.
Su...
Pokayoke is a Japanese term for mistake-proofing or error-proofing.
It is a quality control technique used to prevent errors or defects in a product or process.
It involves designing a process or product in a way that makes it impossible or difficult to make mistakes.
Examples include using color-coding, checklists, and sensors to prevent errors.
Pokayoke helps improve product quality, reduce waste, and increase efficiency
Kaizen is a Japanese term for continuous improvement.
Kaizen involves making small, incremental changes to improve processes and systems.
It is a philosophy that emphasizes the importance of ongoing improvement in all aspects of an organization.
Kaizen can be applied to any area of an organization, from manufacturing to customer service.
Examples of kaizen include implementing a new process to reduce waste, improving commu...
posted on 19 Nov 2020
I applied via Walk-in and was interviewed before Nov 2019. There was 1 interview round.
I applied via Campus Placement and was interviewed before Mar 2020. There were 5 interview rounds.
Moulding is a manufacturing process of shaping liquid or pliable raw material using a rigid frame called a mold.
Types of moulding: injection moulding, blow moulding, compression moulding, rotational moulding, etc.
Forging is a manufacturing process of shaping metal using compressive forces.
LPDC stands for Low Pressure Die Casting, a casting process for producing metal parts.
Materials used for moulding: plastic, rubber,
There are three types of heat transfer: conduction, convection, and radiation.
Conduction is the transfer of heat through direct contact between solids.
Convection is the transfer of heat through the movement of fluids (liquids or gases).
Radiation is the transfer of heat through electromagnetic waves.
Examples: Conduction - touching a hot stove; Convection - boiling water; Radiation - feeling the warmth of the sun.
A boiler is a closed vessel used to generate steam or hot water for heating purposes. There are various types of boilers.
Boilers are used in industries, power plants, and residential buildings.
Types of boilers include fire-tube, water-tube, electric, and biomass boilers.
Boilers can be fueled by coal, oil, gas, or renewable energy sources.
Boilers require regular maintenance to ensure safety and efficiency.
Boiler efficie...
posted on 19 Sep 2023
I applied via Approached by Company and was interviewed in Aug 2024. There were 6 interview rounds.
200% quality impression checking
Store incharges quality control
Cast release control
Production and quality
I applied via Walk-in and was interviewed in Aug 2022. There were 3 interview rounds.
General questions asked in interview
I applied via Campus Placement and was interviewed in Jun 2022. There were 2 interview rounds.
The types of materials used in engines vary depending on the specific engine type and its components.
Engines can be made of various materials such as cast iron, aluminum, steel, and alloys.
Different engine parts may require different materials, for example, pistons are often made of aluminum alloy.
Engine components like cylinder heads, crankshafts, and connecting rods can be made of cast iron or steel.
Some engines may ...
Diploma Trainee Engineer
279
salaries
| ₹1 L/yr - ₹3.2 L/yr |
Junior Engineer
136
salaries
| ₹1.7 L/yr - ₹5 L/yr |
Quality Inspector
84
salaries
| ₹1.2 L/yr - ₹3.2 L/yr |
Quality Engineer
80
salaries
| ₹1.2 L/yr - ₹3.6 L/yr |
DET
78
salaries
| ₹1.1 L/yr - ₹2.5 L/yr |
Hyundai Motor India Limited
VE Commercial Vehicles
Honda
Yamaha Motor