Upload Button Icon Add office photos

Yamaha Motor

Compare button icon Compare button icon Compare

Proud winner of ABECA 2024 - AmbitionBox Employee Choice Awards

zig zag pattern zig zag pattern

Filter interviews by

Yamaha Motor Diploma Trainee Engineer Interview Questions, Process, and Tips

Updated 4 Jul 2022

Top Yamaha Motor Diploma Trainee Engineer Interview Questions and Answers

  • Q1. What is moulding,how many types, what is forging.what is LPDC , what is name of material use to moulding.
  • Q2. 1.What types of material using in engine. 2. How many millimetre in 1 kilometre.
  • Q3. What is type of Heat mode transfer.

Yamaha Motor Diploma Trainee Engineer Interview Experiences

2 interviews found

I applied via Campus Placement and was interviewed in Jun 2022. There were 2 interview rounds.

Round 1 - HR 

(1 Question)

  • Q1. 1.What types of material using in engine. 2. How many millimetre in 1 kilometre.
  • Ans. 

    The types of materials used in engines vary depending on the specific engine type and its components.

    • Engines can be made of various materials such as cast iron, aluminum, steel, and alloys.

    • Different engine parts may require different materials, for example, pistons are often made of aluminum alloy.

    • Engine components like cylinder heads, crankshafts, and connecting rods can be made of cast iron or steel.

    • Some engines may ...

  • Answered by AI
Round 2 - HR 

(1 Question)

  • Q1. 1. family background . 2. Educational questions.
  • Ans. 1. Tell my family background. 2. Many questions I answer in my study oriental.
  • Answered Anonymously

Interview Preparation Tips

Topics to prepare for Yamaha Motor Diploma Trainee Engineer interview:
  • 1.study
  • Technical Skills
  • strength
Interview preparation tips for other job seekers - Don't miss chance. Join and develop your skills and knowledge.

I applied via Campus Placement and was interviewed before Mar 2020. There were 5 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Introduction
  • Q2. What is moulding,how many types, what is forging.what is LPDC , what is name of material use to moulding.
  • Ans. 

    Moulding is a manufacturing process of shaping liquid or pliable raw material using a rigid frame called a mold.

    • Types of moulding: injection moulding, blow moulding, compression moulding, rotational moulding, etc.

    • Forging is a manufacturing process of shaping metal using compressive forces.

    • LPDC stands for Low Pressure Die Casting, a casting process for producing metal parts.

    • Materials used for moulding: plastic, rubber,

  • Answered by AI
  • Q3. What is type of Heat mode transfer.
  • Ans. 

    There are three types of heat transfer: conduction, convection, and radiation.

    • Conduction is the transfer of heat through direct contact between solids.

    • Convection is the transfer of heat through the movement of fluids (liquids or gases).

    • Radiation is the transfer of heat through electromagnetic waves.

    • Examples: Conduction - touching a hot stove; Convection - boiling water; Radiation - feeling the warmth of the sun.

  • Answered by AI
  • Q4. What is boiler & type.
  • Ans. 

    A boiler is a closed vessel used to generate steam or hot water for heating purposes. There are various types of boilers.

    • Boilers are used in industries, power plants, and residential buildings.

    • Types of boilers include fire-tube, water-tube, electric, and biomass boilers.

    • Boilers can be fueled by coal, oil, gas, or renewable energy sources.

    • Boilers require regular maintenance to ensure safety and efficiency.

    • Boiler efficie...

  • Answered by AI
  • Q5. What is your favourite subject

Interview Preparation Tips

Interview preparation tips for other job seekers - Very bad staff , they always give preference to our company causal or telu, chamcha etc.
Jai Haryana ,jai Bharat .
Isliye aaj company ko tala lag gya YMCA fridabad me . Casting head Ravi sharma kaaliya & Shekhar bihari is BC .

Diploma Trainee Engineer Interview Questions Asked at Other Companies

asked in MSPL
Q1. Wich of the following laws states that: in any electrical network ... read more
Q2. Why use Electrical CAD? How draw Symbol of perpendicularity
Q3. What will be the possible reason behind heavy white smoke ?
Q4. Which Types of engine make a tata Cummins
asked in Daikin
Q5. Define one cycle of refrigeration with thermodynamic processes?

Interview questions from similar companies

Interview Questionnaire 

3 Questions

  • Q1. What is the mechanical
  • Ans. 

    Mechanical engineering is a branch of engineering that deals with the design, manufacturing, and maintenance of mechanical systems.

    • It involves the study of mechanics, thermodynamics, and materials science.

    • Mechanical engineers design and develop machines, tools, and equipment.

    • They work in various industries such as automotive, aerospace, and manufacturing.

    • Examples of mechanical systems include engines, turbines, and rob...

  • Answered by AI
  • Q2. Tell any 5 G-codes
  • Ans. 

    G-codes are used in CNC machines to control the movement of the cutting tool. Here are 5 commonly used G-codes.

    • G00 - Rapid positioning

    • G01 - Linear interpolation

    • G02 - Circular interpolation (clockwise)

    • G03 - Circular interpolation (counterclockwise)

    • G28 - Return to home position

  • Answered by AI
  • Q3. What is ic engine give examples
  • Ans. 

    IC engine stands for Internal Combustion engine. It is a heat engine that converts chemical energy into mechanical energy.

    • IC engine is used in automobiles, generators, and other machinery.

    • It works by burning fuel inside a combustion chamber to create high-pressure gases that move a piston.

    • Examples of IC engines include gasoline engines, diesel engines, and natural gas engines.

  • Answered by AI

I applied via Campus Placement and was interviewed before Sep 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

They asked questions on technical baground , mathematical, aptitute, reasoning, and

Round 2 - HR 

(1 Question)

  • Q1. They asked about family background, financial condition, technical knowledge, if worked in any organisation

Interview Preparation Tips

Interview preparation tips for other job seekers - Work pressure is more and out of this company is good in terms of facilities,they provide canteen, gym, pf, esic, etc.

I applied via Campus Placement and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. What will be the possible reason behind heavy white smoke ?

Interview Preparation Tips

Interview preparation tips for other job seekers - Be comfortable with the interviewer . Answer the question with confidence.

I applied via Approached by Company and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Related to subject some favourite subjector interviwer
  • Q2. Two stroke & four stroke difference
  • Ans. 

    Two stroke engines complete a power cycle in one revolution, while four stroke engines complete it in two revolutions.

    • Two stroke engines have a simpler design and are lighter than four stroke engines.

    • Four stroke engines are more fuel-efficient and produce less emissions than two stroke engines.

    • Two stroke engines are commonly used in small power tools and motorcycles, while four stroke engines are used in cars and large...

  • Answered by AI
  • Q3. In which stroke air interned in combustion chamber
  • Ans. 

    Air is interned in the combustion chamber during the intake stroke.

    • During the intake stroke, the piston moves down and creates a vacuum that draws air into the combustion chamber.

    • The air is mixed with fuel and ignited during the compression stroke.

    • The resulting explosion pushes the piston down during the power stroke.

    • Finally, the piston moves up during the exhaust stroke to expel the spent gases.

    • This four-stroke cycle

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Some questions related to tractor technology & thermodynamics etc

I applied via Approached by Company and was interviewed before Mar 2021. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(3 Questions)

  • Q1. Related to subject some favourite subjector interviwer
  • Q2. Two stroke & four stroke difference
  • Ans. 

    Two stroke engines complete a power cycle in one revolution, while four stroke engines complete it in two revolutions.

    • Two stroke engines have a simpler design and are lighter than four stroke engines.

    • Four stroke engines are more fuel-efficient and produce less pollution than two stroke engines.

    • Two stroke engines are commonly used in small power tools and motorcycles, while four stroke engines are used in cars and large...

  • Answered by AI
  • Q3. In which stroke air interned in combustion chamber
  • Ans. 

    Air is interned in the combustion chamber during the intake stroke.

    • During the intake stroke, the piston moves down and air is drawn into the combustion chamber.

    • This air is then mixed with fuel and ignited during the compression stroke.

    • The resulting explosion pushes the piston down, which drives the crankshaft and produces power.

    • The exhaust stroke then expels the spent gases from the combustion chamber.

    • This four-stroke ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Some questions related to tractor technology & thermodynamics etc

I applied via Campus Placement and was interviewed before Apr 2021. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Tell me about your work experience
  • Q2. What is your educational qualification

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare better to face good interview

I applied via Walk-in and was interviewed before Jun 2021. There were 2 interview rounds.

Round 1 - Aptitude Test 

Basic knowledge of Subjects in diploma

Round 2 - Technical 

(2 Questions)

  • Q1. Interviewer asked technical questions
  • Q2. Difference between four stroke and two stroke engine
  • Ans. 

    Four stroke engines have separate intake, compression, power, and exhaust strokes, while two stroke engines combine these strokes.

    • Four stroke engines have a longer cycle and require more parts than two stroke engines.

    • Four stroke engines are more fuel efficient and produce less pollution than two stroke engines.

    • Two stroke engines are simpler in design and have a higher power-to-weight ratio than four stroke engines.

    • Two ...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Prepare your all subjects but main focus on production technology and Industrial management
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Walk-in and was interviewed in Jan 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(2 Questions)

  • Q1. What does it mean by Automobile?
  • Ans. 

    Automobile refers to a vehicle designed for transportation, typically powered by an internal combustion engine.

    • Automobiles are commonly used for personal transportation, as well as for commercial purposes.

    • They come in various types such as cars, trucks, buses, and motorcycles.

    • Automobiles have revolutionized transportation and have greatly impacted society and economy.

    • Examples of automobile manufacturers include Ford, T

  • Answered by AI
  • Q2. State the subjects name of your final semester
Round 3 - Technical 

(4 Questions)

  • Q1. What is the difference between Diesel and petrol engine
  • Ans. 

    Diesel engines use compression ignition while petrol engines use spark ignition.

    • Diesel engines compress air to ignite fuel, while petrol engines use spark plugs

    • Diesel engines are more fuel efficient but produce more emissions

    • Petrol engines are quieter and smoother than diesel engines

    • Diesel engines are commonly used in trucks and heavy machinery, while petrol engines are used in cars and motorcycles

  • Answered by AI
  • Q2. Least count of Vernier caliper and micrometre
  • Ans. 

    The least count of a Vernier caliper is 0.02 mm and the least count of a micrometer is 0.01 mm.

    • Vernier caliper has a least count of 0.02 mm, which means it can measure up to 0.02 mm accuracy.

    • Micrometer has a least count of 0.01 mm, allowing for measurements with 0.01 mm precision.

  • Answered by AI
  • Q3. Calculate the value 9.23-3.45
  • Ans. 

    Subtracting 3.45 from 9.23 gives the result of 5.78.

    • Subtract the second number from the first number

    • 9.23 - 3.45 = 5.78

  • Answered by AI
  • Q4. Basic computer related questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Just prepare your basic fundamentals of your academic subjects, such as I did Diploma in mechanical so, i prepared basics of Automobile, measuring instruments, Basic of engineering drawing and computer related questions.

Yamaha Motor Interview FAQs

How many rounds are there in Yamaha Motor Diploma Trainee Engineer interview?
Yamaha Motor interview process usually has 2 rounds. The most common rounds in the Yamaha Motor interview process are HR.
What are the top questions asked in Yamaha Motor Diploma Trainee Engineer interview?

Some of the top questions asked at the Yamaha Motor Diploma Trainee Engineer interview -

  1. What is moulding,how many types, what is forging.what is LPDC , what is name of...read more
  2. 1.What types of material using in engine. 2. How many millimetre in 1 kilomet...read more
  3. What is type of Heat mode transf...read more

Tell us how to improve this page.

Yamaha Motor Diploma Trainee Engineer Salary
based on 23 salaries
₹1.4 L/yr - ₹3.5 L/yr
At par with the average Diploma Trainee Engineer Salary in India
View more details

Yamaha Motor Diploma Trainee Engineer Reviews and Ratings

based on 29 reviews

4.3/5

Rating in categories

4.2

Skill development

4.0

Work-life balance

3.9

Salary

4.1

Job security

4.3

Company culture

3.2

Promotions

4.3

Work satisfaction

Explore 29 Reviews and Ratings
Assistant Manager
238 salaries
unlock blur

₹8.1 L/yr - ₹16 L/yr

Deputy Manager
167 salaries
unlock blur

₹9.8 L/yr - ₹20.3 L/yr

Senior Engineer
159 salaries
unlock blur

₹6 L/yr - ₹14 L/yr

Trainee
96 salaries
unlock blur

₹1.1 L/yr - ₹3.1 L/yr

Engineer
95 salaries
unlock blur

₹3.2 L/yr - ₹9 L/yr

Explore more salaries
Compare Yamaha Motor with

Tata Motors

4.2
Compare

Mahindra & Mahindra

4.1
Compare

Hyundai Motor India Limited

4.3
Compare

Royal Enfield

4.2
Compare
Did you find this page helpful?
Yes No
write
Share an Interview