Upload Button Icon Add office photos

AVTEC

Compare button icon Compare button icon Compare

Filter interviews by

AVTEC Diploma Mechanical Engineer Interview Questions and Answers

Updated 10 Mar 2022

AVTEC Diploma Mechanical Engineer Interview Experiences

1 interview found

Round 1 - Technical 

(1 Question)

  • Q1. Engine Assembly line

Interview Preparation Tips

Interview preparation tips for other job seekers - Your job is a very special work and honesty

Interview questions from similar companies

I applied via Recruitment Consultant and was interviewed before Oct 2020. There were 3 interview rounds.

Interview Questionnaire 

5 Questions

  • Q1. Which vehicle license you have?
  • Ans. 

    I have a valid driver's license for both cars and motorcycles.

    • I have a Class C license for cars

    • I also have a Class M license for motorcycles

    • I have a clean driving record with no accidents or violations

  • Answered by AI
  • Q2. What is CBS & ABS
  • Q3. Which segment of bike you ride
  • Ans. 

    I ride a road bike for commuting and a mountain bike for leisure.

    • I prefer road bikes for their speed and efficiency on paved roads.

    • I enjoy mountain biking for the challenge and adventure of off-road trails.

    • I also have experience with hybrid bikes for their versatility.

    • I prioritize safety and always wear a helmet and follow traffic laws.

    • I have participated in charity rides and group rides for fun and community.

  • Answered by AI
  • Q4. How you do the vehicle testing
  • Ans. 

    Vehicle testing involves various methods to ensure safety, performance, and compliance with regulations.

    • Testing can include physical tests such as crash tests, durability tests, and performance tests.

    • Simulation and modeling can also be used to test vehicle components and systems.

    • Testing must comply with regulations set by organizations such as the National Highway Traffic Safety Administration (NHTSA) and the European

  • Answered by AI
  • Q5. Which type of Homologation testing you do?
  • Ans. 

    We conduct various types of homologation testing depending on the product and its intended market.

    • We conduct safety testing to ensure compliance with local regulations.

    • We perform emissions testing to ensure compliance with environmental regulations.

    • We conduct performance testing to ensure the product meets the required standards.

    • We also conduct durability testing to ensure the product can withstand the expected wear an...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - That question were ask me for vehicle testing engineer & for test rider position

I applied via Recruitment Consultant and was interviewed in Nov 2019. There were 3 interview rounds.

Interview Questionnaire 

4 Questions

  • Q1. Qms related all questions (ISO/IATF). And how development of products in process, Processe controls
  • Q2. How can improve communication and personality
  • Ans. 

    Improving communication and personality requires self-awareness, active listening, and continuous learning.

    • Practice active listening to understand others' perspectives

    • Be aware of your own communication style and adjust as needed

    • Seek feedback and be open to constructive criticism

    • Read books or take courses on communication and interpersonal skills

    • Practice empathy and emotional intelligence

    • Be respectful and courteous in a

  • Answered by AI
  • Q3. How can show your potential
  • Q4. How can show first impressions
  • Ans. 

    First impressions can be shown through body language, attire, and communication skills.

    • Body language can convey confidence or nervousness

    • Attire can show professionalism or lack thereof

    • Communication skills can demonstrate intelligence and articulation

    • Eye contact and a firm handshake can also make a positive impression

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Dec 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Design question, HVAC cooling question, work related question, situation question, plastic and sheet metal question...
Round 3 - HR 

(1 Question)

  • Q1. Work related experience, salary question, salary negotiation..

Interview Preparation Tips

Interview preparation tips for other job seekers - Answer each and Every Work Related questions with a good example that justifying your experience.
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Approached by Company and was interviewed before Sep 2022. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(1 Question)

  • Q1. Kanban,Heijunka,JIT,SAP,FIFO, Inventory mangement
Round 3 - Technical 

(1 Question)

  • Q1. SAP,Capacity,Planning

Interview Preparation Tips

Interview preparation tips for other job seekers - Pl prepare for interview regarding SAP, Production planning etc.
Interview experience
5
Excellent
Difficulty level
-
Process Duration
4-6 weeks
Result
-
Round 1 - Group Discussion 

What is IATF ?
IATF Clause?
Major Achievements?
Why should i hire you ?
Briefly your Daily routine work?

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I appeared for an interview before Mar 2024.

Round 1 - Technical 

(1 Question)

  • Q1. Technical past experience based questions
Round 2 - Case Study 

Past experience based questions

Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Referral and was interviewed before Oct 2022. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Injection molding process
  • Q2. Six step study ,
  • Ans. Gate freeze, holding, pressure drop, viscosity, cooling or dimensions study.
  • Answered by Mohammad Ali

Interview Preparation Tips

Interview preparation tips for other job seekers - Knowledge in robo better

I applied via Recruitment Consultant and was interviewed in Dec 2020. There were 3 interview rounds.

Interview Questionnaire 

7 Questions

  • Q1. Q1. What is the latest version of PPAP?
  • Ans. 

    The latest version of PPAP is PPAP 4th Edition.

    • PPAP stands for Production Part Approval Process.

    • The 4th Edition of PPAP was released in 2006.

    • It is a standardized process in the automotive industry to ensure that suppliers meet the requirements for production parts.

    • PPAP includes documentation such as design records, engineering change documents, and control plans.

    • It also involves conducting various tests and measurement...

  • Answered by AI
  • Q2. Q2. What is Fmea & why it is used during development?
  • Ans. 

    FMEA is a method used during development to identify and mitigate potential failures in a system or process.

    • FMEA stands for Failure Mode and Effects Analysis.

    • It is a systematic approach to identify and prioritize potential failures in a system or process.

    • FMEA helps in understanding the potential causes and effects of failures.

    • It is used to assess the severity, occurrence, and detectability of failures.

    • By analyzing fail...

  • Answered by AI
  • Q3. What is DVP&R ?
  • Ans. 

    DVP&R stands for Design Verification Plan and Report. It is a process used to ensure that a product meets its design specifications.

    • DVP&R is a structured approach to testing and validating a product's design.

    • It involves creating a plan for testing the product, executing the tests, and documenting the results.

    • The plan includes details such as the test objectives, test methods, acceptance criteria, and test schedule.

    • The ...

  • Answered by AI
  • Q4. What is the value of NDC & we take the this value..??
  • Ans. 

    NDC stands for National Drug Code. It is a unique identifier for drugs in the United States.

    • NDC is a 10-digit code that identifies drugs, including prescription and over-the-counter medications.

    • The first segment of the NDC represents the labeler code, which identifies the manufacturer or distributor of the drug.

    • The second segment represents the product code, which identifies the specific drug formulation and strength.

    • T...

  • Answered by AI
  • Q5. At which stage the Npd work of PPAP File making is done?
  • Ans. 

    PPAP file making is done during the production validation stage of NPD work.

    • PPAP file making is a part of the production validation process in NPD work

    • It involves documenting the production process and ensuring it meets customer requirements

    • PPAP file making is typically done after the design and development stages

    • It includes documentation such as control plans, process flow diagrams, and inspection records

  • Answered by AI
  • Q6. How many ppm in 6 sigma..?
  • Ans. 

    The ppm in 6 sigma is 3.4 defects per million opportunities (DPMO).

    • 6 sigma aims for a defect rate of 3.4 DPMO.

    • PPM stands for parts per million.

    • DPMO is a measure of process performance.

    • The lower the DPMO, the better the process performance.

    • Achieving 6 sigma means having a process that produces 99.99966% defect-free output.

  • Answered by AI
  • Q7. Problem solving tools & describe pareto chart & why we use it..?
  • Ans. 

    Pareto chart is a problem-solving tool used to identify and prioritize the causes of a problem.

    • Pareto chart is a bar graph that displays the relative frequency or size of problems in descending order of importance.

    • It helps to identify the vital few causes that account for the majority of the problems.

    • It is based on the Pareto principle, also known as the 80/20 rule, which states that 80% of the effects come from 20% of...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Give interview with full confidence either u r wrong or right .

I applied via Recruitment Consulltant and was interviewed before Jun 2021. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Telephonic Call 

(1 Question)

  • Q1. Technical questions related to Mechanical Engineering. Current job role and responsibilities
Round 3 - Panel interview 

(2 Questions)

  • Q1. Current job role and responsibilities.
  • Q2. What is Tempering? Material science questions
Round 4 - One-on-one 

(2 Questions)

  • Q1. Interview with VP India.
  • Q2. Questions on Combustion Engines. Difference between two-stroke and four-stroke. Current job role and responsibilities. How to design a snap.

Interview Preparation Tips

Interview preparation tips for other job seekers - Know your profile well. Brush up on Mechanical engineering topics

AVTEC Interview FAQs

How many rounds are there in AVTEC Diploma Mechanical Engineer interview?
AVTEC interview process usually has 1 rounds. The most common rounds in the AVTEC interview process are Technical.

Tell us how to improve this page.

Fast track your campus placements

View all

AVTEC Diploma Mechanical Engineer Reviews and Ratings

based on 4 reviews

4.7/5

Rating in categories

4.9

Skill development

4.9

Work-life balance

4.9

Salary

4.0

Job security

4.1

Company culture

4.1

Promotions

4.9

Work satisfaction

Explore 4 Reviews and Ratings
Assistant Manager
105 salaries
unlock blur

₹4.2 L/yr - ₹12.3 L/yr

Production Engineer
76 salaries
unlock blur

₹1 L/yr - ₹5.6 L/yr

Engineer
71 salaries
unlock blur

₹2.8 L/yr - ₹5.5 L/yr

Senior Engineer
58 salaries
unlock blur

₹3.5 L/yr - ₹7.3 L/yr

Quality Engineer
57 salaries
unlock blur

₹1.4 L/yr - ₹4.5 L/yr

Explore more salaries
Compare AVTEC with

JBM Group

4.0
Compare

Subros

3.8
Compare

Ceat Tyres

4.0
Compare

UNO Minda

4.0
Compare
Did you find this page helpful?
Yes No
write
Share an Interview