Filter interviews by
I applied via Referral and was interviewed in Jun 2023. There were 3 interview rounds.
Elasticity refers to the ability of a material to return to its original shape after being stretched or compressed.
Elasticity is a property of materials that allows them to deform under stress and return to their original shape when the stress is removed.
It is often measured by the ratio of stress to strain, known as Young's modulus.
Rubber bands and springs are examples of materials with high elasticity.
Materials with ...
Gamma (γ) is a unit of measurement for angles in geometry and physics.
Gamma is often used in physics to represent the Lorentz factor in special relativity.
In geometry, gamma is commonly used to denote an angle in a triangle or other shape.
The value of gamma can vary depending on the specific context in which it is being used.
Power is calculated using the formula P = VI, where P is power, V is voltage, and I is current.
Power = Voltage x Current
The unit of power is watt (W)
For example, if a device operates at 120 volts and draws 5 amps of current, the power consumption would be 600 watts (P = 120V x 5A)
The unit of power is the watt (W), which measures the rate at which work is done or energy is transferred.
The unit of power is the watt (W)
Power is a measure of the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Other common units of power include horsepower (hp) and kilowatt (kW)
1 H.P is equal to 746 watts.
1 H.P = 746 watts
H.P stands for horsepower, a unit of power
Watts is the SI unit of power
The work of knuckles joint is to allow movement between two bones in the fingers.
Knuckles joint allows for flexion, extension, and rotation of the fingers
It is a synovial joint, allowing for smooth movement
The joint is supported by ligaments and tendons
Common activities that involve the knuckles joint include gripping objects and typing on a keyboard
1 inch is equal to 25.4 millimeters.
1 inch = 25.4 mm
To convert inches to millimeters, multiply the number of inches by 25.4
For example, 2 inches is equal to 50.8 mm (2 x 25.4)
There are 1000 microns in 1 mm.
1 mm is equal to 1000 microns
Micron is a unit of length equal to one millionth of a meter
Used in various industries such as manufacturing, engineering, and science
I applied via Recruitment Consulltant and was interviewed before Jan 2023. There were 2 interview rounds.
IATF stands for International Automotive Task Force.
IATF is a group of automotive manufacturers and trade associations.
It was formed to develop and maintain a common quality management system for the automotive industry.
The IATF 16949 standard is based on ISO 9001 and includes additional automotive-specific requirements.
Compliance with IATF standards is often required for automotive suppliers.
IATF certification demonst...
ISO 9001:2008 focused on processes and procedures, while ISO 9001:2015 emphasizes risk-based thinking and a process approach.
ISO 9001:2008 had a more prescriptive approach, while ISO 9001:2015 is more flexible and adaptable.
ISO 9001:2015 introduces the concept of context of the organization and interested parties.
ISO 9001:2015 emphasizes leadership involvement and commitment to quality management.
ISO 9001:2015 requires...
5s is a methodology used to organize and maintain a clean, efficient, and safe work environment.
Sort: Remove unnecessary items from the work area.
Set in order: Organize remaining items in a logical manner.
Shine: Clean and inspect the work area regularly.
Standardize: Establish procedures and schedules for maintaining the 5s system.
Sustain: Ensure the 5s system is consistently followed and improved upon.
Example: Implemen...
Types of gears include spur gears, helical gears, bevel gears, worm gears, rack and pinion gears, and planetary gears.
Spur gears have straight teeth and are the most common type of gear.
Helical gears have angled teeth for smoother and quieter operation.
Bevel gears have cone-shaped teeth and are used to change the direction of rotation.
Worm gears have a screw-like appearance and provide high gear reduction ratios.
Rack a...
I applied via Walk-in and was interviewed in Jun 2022. There were 4 interview rounds.
Autocad 2022, Reading Engeneering Drawing,
Knowledge of Ms Office, Advance Excel.
I applied via Walk-in and was interviewed in Jun 2022. There were 4 interview rounds.
Autocad 2022, Reading Engeneering Drawing,
Knowledge of Ms Office, Advance Excel.
Aurangabad auto Engineering interview questions for popular designations
I applied via Approached by Company and was interviewed in Mar 2022. There were 2 interview rounds.
Top trending discussions
I am a hardworking individual with a passion for learning and growth. I completed a summer internship in marketing and come from a supportive family.
I am a hardworking individual
Passionate about learning and growth
Completed a summer internship in marketing
Come from a supportive family
To retain an employee, I will focus on creating a positive work environment and offering opportunities for growth and development.
Offer competitive salaries and benefits
Provide opportunities for training and development
Create a positive work culture with open communication and recognition
Offer flexible work arrangements
Provide opportunities for career advancement within the company
Regularly check in with employees to a...
Yes, I am comfortable with working in different cities and travelling.
I have previous experience working in different cities and travelling for work.
I am adaptable and can quickly adjust to new environments.
I enjoy exploring new places and meeting new people.
I understand the importance of being flexible and available for work-related travel.
I am willing to make necessary arrangements to ensure smooth travel and work ex
I apologize for being late. I had an emergency that I had to attend to.
I had an unexpected emergency that required my immediate attention
I made sure to inform the organizers as soon as I could
I understand the importance of punctuality and will ensure it in the future
I appeared for an interview in Jun 2017.
I applied via Referral and was interviewed before Jan 2020. There were 4 interview rounds.
Processes required in any project include planning, execution, monitoring, and closing.
Planning involves defining project goals, scope, and resources.
Execution involves carrying out the plan and completing project tasks.
Monitoring involves tracking progress and making adjustments as needed.
Closing involves wrapping up the project and evaluating its success.
Examples of project processes include risk management, quality
Points to check in an invoice before processing
Check for accuracy of billing information
Verify the amount charged and ensure it matches the agreed upon price
Ensure all necessary supporting documents are attached
Check for any discounts or promotions that may apply
Verify the payment terms and due date
Ensure the invoice is addressed to the correct recipient
Check for any errors or discrepancies
I applied via Company Website and was interviewed before Nov 2020. There were 4 interview rounds.
based on 5 interviews
Interview experience
based on 47 reviews
Rating in categories
Quality Engineer
54
salaries
| ₹1.8 L/yr - ₹4.3 L/yr |
Senior Engineer
11
salaries
| ₹4.4 L/yr - ₹5.3 L/yr |
Production Engineer
11
salaries
| ₹2.2 L/yr - ₹6.5 L/yr |
CNC Operator
9
salaries
| ₹1.8 L/yr - ₹2 L/yr |
QA Engineer
9
salaries
| ₹2.1 L/yr - ₹4.2 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Ashok Leyland