Aurangabad auto Engineering Interview Questions, Process, and Tips

Q1. Tell me something about yourself?
Ans. Firstly I would like to say thanks for giving me an opportunity to the interduces myself in front of you. This is Jitendra Verma from Bareilly But currently lives in Awas vikash, I have done B.tech in Mechanical Engineering in 2018 with 72%. My strength are positives attitude and Hard working towards everything i do. My weakness are Narvesness, short temper towards everything i do. I am fresher, That's all about me
Answered Anonymously
Add your answer
Q2. Tell me something about your family?
Ans. There are three members including me, my father is a retaired from UPSI in july 2018, and my mother is a Homemaker and me sit in front of you.
Answered Anonymously
Add your answer
Q3. May i know your future goal?
Ans. I aim to be successful Engineer in my future
Answered Anonymously
Add your answer

Q1. What is the elasticity?
Ans. 
Elasticity refers to the ability of a material to return to its original shape after being stretched or compressed.
• Elasticity is a property of materials that allows them to deform under stress and return to their original shape when the stress is removed.

• It is often measured by the ratio of stress to strain, known as Young's modulus.

• Rubber bands and springs are examples of materials with high elasticity.

• Materials with ...read more
Answered by AI
View 1 more answer
Q2. What is value of gama?
Ans. 
Gamma (γ) is a unit of measurement for angles in geometry and physics.
• Gamma is often used in physics to represent the Lorentz factor in special relativity.

• In geometry, gamma is commonly used to denote an angle in a triangle or other shape.

• The value of gamma can vary depending on the specific context in which it is being used.
Answered by AI
View 1 more answer
Q3. What is the formula of power?
Ans. 
Power is calculated using the formula P = VI, where P is power, V is voltage, and I is current.
• Power = Voltage x Current

• The unit of power is watt (W)

• For example, if a device operates at 120 volts and draws 5 amps of current, the power consumption would be 600 watts (P = 120V x 5A)
Answered by AI
View 1 more answer
Q4. What is the unit of power?
Ans. 
The unit of power is the watt (W), which measures the rate at which work is done or energy is transferred.
• The unit of power is the watt (W)

• Power is a measure of the rate at which work is done or energy is transferred

• 1 watt is equal to 1 joule per second

• Other common units of power include horsepower (hp) and kilowatt (kW)
Answered by AI
View 1 more answer
Q5. 1 H.P is equalls to
Ans. 
1 H.P is equal to 746 watts.
• 1 H.P = 746 watts

• H.P stands for horsepower, a unit of power

• Watts is the SI unit of power
Answered by AI
View 1 more answer
Q6. What is the twork of knuckles joint ?
Ans. 
The work of knuckles joint is to allow movement between two bones in the fingers.
• Knuckles joint allows for flexion, extension, and rotation of the fingers

• It is a synovial joint, allowing for smooth movement

• The joint is supported by ligaments and tendons

• Common activities that involve the knuckles joint include gripping objects and typing on a keyboard
Answered by AI
View 1 more answer
Q7. How much the mm in 1 inches?
Ans. 
1 inch is equal to 25.4 millimeters.
• 1 inch = 25.4 mm

• To convert inches to millimeters, multiply the number of inches by 25.4

• For example, 2 inches is equal to 50.8 mm (2 x 25.4)
Answered by AI
View 1 more answer
Q8. How much the microns in 1 mm?
Ans. 
There are 1000 microns in 1 mm.
• 1 mm is equal to 1000 microns

• Micron is a unit of length equal to one millionth of a meter

• Used in various industries such as manufacturing, engineering, and science
Answered by AI
View 1 more answer

Q1. What about IATF?
Ans. 
IATF stands for International Automotive Task Force.
• IATF is a group of automotive manufacturers and trade associations.

• It was formed to develop and maintain a common quality management system for the automotive industry.

• The IATF 16949 standard is based on ISO 9001 and includes additional automotive-specific requirements.

• Compliance with IATF standards is often required for automotive suppliers.

• IATF certification demonst...read more
Answered by AI
Add your answer
Q2. Difference between iso 2009&2015
Ans. 
ISO 9001:2008 focused on processes and procedures, while ISO 9001:2015 emphasizes risk-based thinking and a process approach.
• ISO 9001:2008 had a more prescriptive approach, while ISO 9001:2015 is more flexible and adaptable.

• ISO 9001:2015 introduces the concept of context of the organization and interested parties.

• ISO 9001:2015 emphasizes leadership involvement and commitment to quality management.

• ISO 9001:2015 requires...read more
Answered by AI
Add your answer
Q3. Implementation of 5s
Ans. 
5s is a methodology used to organize and maintain a clean, efficient, and safe work environment.
• Sort: Remove unnecessary items from the work area.

• Set in order: Organize remaining items in a logical manner.

• Shine: Clean and inspect the work area regularly.

• Standardize: Establish procedures and schedules for maintaining the 5s system.

• Sustain: Ensure the 5s system is consistently followed and improved upon.

• Example: Implemen...read more
Answered by AI
Add your answer

Q1. Types of gears?
Ans. 
Types of gears include spur gears, helical gears, bevel gears, worm gears, rack and pinion gears, and planetary gears.
• Spur gears have straight teeth and are the most common type of gear.

• Helical gears have angled teeth for smoother and quieter operation.

• Bevel gears have cone-shaped teeth and are used to change the direction of rotation.

• Worm gears have a screw-like appearance and provide high gear reduction ratios.

• Rack a...read more
Answered by AI
Add your answer
Q2. GD&T and Roles and responsibilities in your previous organization.
Add your answer
Q3. Awareness about IPO, CP, SPC & MSA
Add your answer

Autocad 2022, Reading Engeneering Drawing,

Knowledge of Ms Office, Advance Excel.

Q1. Tell me about your self.
Add your answer

Autocad 2022, Reading Engeneering Drawing,

Knowledge of Ms Office, Advance Excel.

Q1. Tell me about your self.
Add your answer