Filter interviews by
I was interviewed in Dec 2024.
MMC stands for Maximum Material Condition and LMC stands for Least Material Condition. They are used in Geometric Dimensioning and Tolerancing (GD&T) to specify the maximum and minimum limits of a part's dimensions.
MMC is the condition where a part contains the maximum amount of material within the specified limits.
LMC is the condition where a part contains the least amount of material within the specified limits.
F...
Layout inspection is a quality control process to verify dimensions, tolerances, and alignment of components or products.
Ensures components or products are manufactured according to design specifications
Involves measuring dimensions, angles, and alignments using tools like calipers, micrometers, and CMM machines
Helps identify any deviations from the design that may affect product functionality or performance
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of part features.
Some common symbols used in GD&T include: Ø for diameter, ⌀ for circular runout, ⊥ for perpendicularity, and ∠ for angularity.
GD&T helps ensure that parts fit together properly and fun...
Selecting the right instrument for dimensional inspection involves considering the accuracy, precision, and type of measurement needed.
Identify the specific dimensions and tolerances that need to be measured
Consider the accuracy and precision required for the inspection
Choose the appropriate instrument based on the type of measurement (e.g. calipers for linear measurements, micrometers for precise measurements)
Ensure t...
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of part features.
Symbols used in GD&T include: concentricity, position, profile, runout, perpendicularity, parallelism, etc.
GD&T helps ensure parts are manufactured to the correct dimensions and tolera
Selecting the right instrument for dimensional inspection involves considering accuracy, precision, type of measurement, and calibration.
Understand the specific requirements of the component being inspected
Consider the accuracy and precision needed for the measurements
Choose the appropriate type of instrument (e.g. calipers, micrometers, CMM)
Ensure the instrument is properly calibrated before use
Verify the instrument's...
Binary Tree,Stack,queue,Array,Linked List
Array,Linked List,Binary Tree,Stack,Queue
Technical questions related to engine
An engine is a machine that converts fuel into mechanical energy to produce motion.
Converts fuel into mechanical energy
Produces motion
Can be found in vehicles, machinery, and power generators
Six Sigma is a data-driven methodology used to improve processes by reducing defects and variations.
Six Sigma aims to achieve near perfection in processes by identifying and eliminating causes of defects.
It uses statistical analysis to measure and improve process performance.
Six Sigma projects follow a structured approach known as DMAIC: Define, Measure, Analyze, Improve, Control.
Organizations often use Six Sigma to in...
I was interviewed in Apr 2023.
TRIGO Group interview questions for popular designations
I applied via Wattsapp and was interviewed in Jun 2023. There were 3 interview rounds.
Quality tools are techniques or methods used to analyze and improve processes to ensure high quality outcomes.
Quality tools help identify and solve problems in processes
Examples include Pareto charts, fishbone diagrams, control charts, and scatter diagrams
They are used to monitor and improve quality standards
I applied via Campus Placement and was interviewed in May 2023. There were 3 interview rounds.
Math, resigning, trade related questions
Quality is the measure of excellence or superiority of a product or service.
Quality is meeting or exceeding customer expectations.
It involves consistency, reliability, and conformance to standards.
Quality can be measured through various metrics such as defect rates, customer satisfaction, and adherence to specifications.
Continuous improvement is essential for maintaining and enhancing quality.
Examples of quality in pro...
1 metre is equal to 100 centimetres.
1 metre = 100 centimetres
To convert metres to centimetres, multiply by 100
Example: 2 metres = 2 * 100 = 200 centimetres
10mm is equal to 10,000 microns.
1 mm = 1,000 microns
Therefore, 10mm = 10,000 microns
I applied via Referral and was interviewed before May 2022. There were 3 interview rounds.
10-15 questions for aptitude and technical questions.
I applied via Recruitment Consulltant and was interviewed in Nov 2021. There were 2 interview rounds.
Exploring new business and product requires market research, identifying customer needs, and developing a unique value proposition.
Conduct market research to identify gaps in the market and potential customer needs
Develop a unique value proposition that sets your product apart from competitors
Create a marketing strategy that targets your ideal customer base
Build relationships with potential partners and investors
Stay u...
posted on 14 Feb 2022
I applied via Company Website and was interviewed in Jan 2022. There were 4 interview rounds.
I applied via Approached by Company and was interviewed in Sep 2021. There was 1 interview round.
Top trending discussions
based on 11 interviews
Interview experience
based on 160 reviews
Rating in categories
Quality Inspector
165
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
123
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Manager
23
salaries
| ₹0 L/yr - ₹0 L/yr |
Team Lead
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Inspection Engineer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Infosys
Wipro
HCLTech