Filter interviews by
Clear (1)
I was interviewed in Dec 2024.
MMC stands for Maximum Material Condition and LMC stands for Least Material Condition. They are used in Geometric Dimensioning and Tolerancing (GD&T) to specify the maximum and minimum limits of a part's dimensions.
MMC is the condition where a part contains the maximum amount of material within the specified limits.
LMC is the condition where a part contains the least amount of material within the specified limits.
F...
Layout inspection is a quality control process to verify dimensions, tolerances, and alignment of components or products.
Ensures components or products are manufactured according to design specifications
Involves measuring dimensions, angles, and alignments using tools like calipers, micrometers, and CMM machines
Helps identify any deviations from the design that may affect product functionality or performance
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of part features.
Some common symbols used in GD&T include: Ø for diameter, ⌀ for circular runout, ⊥ for perpendicularity, and ∠ for angularity.
GD&T helps ensure that parts fit together properly and fun...
Selecting the right instrument for dimensional inspection involves considering the accuracy, precision, and type of measurement needed.
Identify the specific dimensions and tolerances that need to be measured
Consider the accuracy and precision required for the inspection
Choose the appropriate instrument based on the type of measurement (e.g. calipers for linear measurements, micrometers for precise measurements)
Ensure t...
GD&T stands for Geometric Dimensioning and Tolerancing. It is a system for defining and communicating engineering tolerances.
GD&T is used to specify the allowable variations in form, size, and orientation of part features.
Symbols used in GD&T include: concentricity, position, profile, runout, perpendicularity, parallelism, etc.
GD&T helps ensure parts are manufactured to the correct dimensions and tolera
Selecting the right instrument for dimensional inspection involves considering accuracy, precision, type of measurement, and calibration.
Understand the specific requirements of the component being inspected
Consider the accuracy and precision needed for the measurements
Choose the appropriate type of instrument (e.g. calipers, micrometers, CMM)
Ensure the instrument is properly calibrated before use
Verify the instrument's...
Top trending discussions
I applied via Naukri.com and was interviewed in Dec 2020. There was 1 interview round.
QMS stands for Quality Management System. It is a set of policies, processes, and procedures required for planning and execution of quality control.
QMS ensures that products or services meet customer requirements and comply with regulations
It includes quality planning, quality control, quality assurance, and quality improvement
ISO 9001 is a widely recognized QMS standard
QMS is important for industries such as healthcar
To reduce rejections and reworks, implement a robust quality control system and focus on continuous improvement.
Implement a quality control system to catch defects early
Train employees on proper procedures and techniques
Conduct regular audits to identify areas for improvement
Analyze root causes of rejections and reworks to prevent future occurrences
Collaborate with suppliers to improve incoming materials quality
Utilize...
Logical Reasoning,Verbal Reasoning
I finished my hard work by prioritizing tasks, staying organized, seeking help when needed, and ensuring quality standards were met.
Prioritized tasks based on deadlines and importance
Stayed organized by creating to-do lists and setting goals
Sought help from team members or supervisors when facing challenges
Ensured quality standards were met through thorough testing and attention to detail
I am a Quality Engineer with experience in improving processes and ensuring product quality. I am seeking new opportunities to further develop my skills.
I have been working as a Quality Engineer for the past 5 years.
I have successfully implemented quality improvement initiatives, resulting in cost savings and increased customer satisfaction.
I have a strong understanding of quality standards and regulatory requirements.
...
Design verification is the process of evaluating whether a product meets its design specifications and requirements.
Design verification involves testing and analyzing the product to ensure it meets the intended design specifications.
It is important to establish a clear set of design specifications and requirements before beginning the verification process.
Verification can be done through various methods such as simulat...
Updated PFMEA/DFMEA when a new supplier was introduced
Identified potential failure modes and effects of the new supplier's components
Evaluated the severity, occurrence, and detection of each failure mode
Updated the PFMEA/DFMEA with the new information
Collaborated with the supplier to implement corrective actions
Continuously monitored and updated the PFMEA/DFMEA as necessary
I applied via Naukri.com and was interviewed in Nov 2020. There was 1 interview round.
Electronics City is a major IT hub in Bangalore, India, housing numerous electronics and IT companies.
Electronics City is located in Bangalore, Karnataka, India.
It is spread over an area of 332 acres and is divided into three phases.
The city is home to many multinational companies, research institutions, and educational institutions.
Some of the prominent companies in Electronics City include Infosys, Wipro, Hewlett-Pac...
The biggest mobile industry in India is Reliance Jio.
Reliance Jio is the largest mobile network operator in India.
It has a subscriber base of over 400 million as of 2021.
Reliance Jio disrupted the Indian telecom market with its affordable data plans and free voice calls.
It offers high-speed 4G internet services and has expanded into various digital services like JioTV, JioCinema, etc.
I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.
Program to check if a number is prime or not
Create a function to check if a number is prime by iterating from 2 to square root of the number
If the number is divisible by any number other than 1 and itself, it is not prime
Return true if the number is prime, false otherwise
It was well organised
Previous responsibilities included ensuring product quality, conducting inspections, analyzing data, and implementing improvements.
Conducted quality inspections on products to ensure they met standards
Analyzed data to identify trends and areas for improvement
Implemented quality control measures to enhance product quality
Collaborated with cross-functional teams to address quality issues
Participated in root cause analysi...
based on 1 interview
Interview experience
based on 2 reviews
Rating in categories
Quality Inspector
165
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Engineer
123
salaries
| ₹0 L/yr - ₹0 L/yr |
Site Manager
23
salaries
| ₹0 L/yr - ₹0 L/yr |
Team Lead
13
salaries
| ₹0 L/yr - ₹0 L/yr |
Quality Inspection Engineer
13
salaries
| ₹0 L/yr - ₹0 L/yr |
TCS
Infosys
Wipro
HCLTech