AmbitionBox
Interview Questions
- Reviews
- Salaries
- Interview Questions
- About Company
- Benefits
- Jobs
- Office Photos
- Community
Add office photos
Filter interviews by
Aurangabad auto Engineering Production Supervisor Interview Questions, Process, and Tips
Aurangabad auto Engineering Production Supervisor Interview Experiences
1 interview found
Selected
I applied via Referral and was interviewed in Jun 2023. There were 3 interview rounds.
(3 Questions)
- Q1. Tell me something about yourself?
- Ans. Firstly I would like to say thanks for giving me an opportunity to the interduces myself in front of you. This is Jitendra Verma from Bareilly But currently lives in Awas vikash, I have done B.tech in Mechanical Engineering in 2018 with 72%. My strength are positives attitude and Hard working towards everything i do. My weakness are Narvesness, short temper towards everything i do. I am fresher, That's all about me
- Q2. Tell me something about your family?
- Ans. There are three members including me, my father is a retaired from UPSI in july 2018, and my mother is a Homemaker and me sit in front of you.
- Q3. May i know your future goal?
- Ans. I aim to be successful Engineer in my future
(8 Questions)
- Q1. What is the elasticity?
- Ans.
Elasticity refers to the ability of a material to return to its original shape after being stretched or compressed.
Elasticity is a property of materials that allows them to deform under stress and return to their original shape when the stress is removed.
It is often measured by the ratio of stress to strain, known as Young's modulus.
Rubber bands and springs are examples of materials with high elasticity.
Materials with ...
- Q2. What is value of gama?
- Ans.
Gamma (γ) is a unit of measurement for angles in geometry and physics.
Gamma is often used in physics to represent the Lorentz factor in special relativity.
In geometry, gamma is commonly used to denote an angle in a triangle or other shape.
The value of gamma can vary depending on the specific context in which it is being used.
- Q3. What is the formula of power?
- Ans.
Power is calculated using the formula P = VI, where P is power, V is voltage, and I is current.
Power = Voltage x Current
The unit of power is watt (W)
For example, if a device operates at 120 volts and draws 5 amps of current, the power consumption would be 600 watts (P = 120V x 5A)
- Q4. What is the unit of power?
- Ans.
The unit of power is the watt (W), which measures the rate at which work is done or energy is transferred.
The unit of power is the watt (W)
Power is a measure of the rate at which work is done or energy is transferred
1 watt is equal to 1 joule per second
Other common units of power include horsepower (hp) and kilowatt (kW)
- Q5. 1 H.P is equalls to
- Ans.
1 H.P is equal to 746 watts.
1 H.P = 746 watts
H.P stands for horsepower, a unit of power
Watts is the SI unit of power
- Q6. What is the twork of knuckles joint ?
- Ans.
The work of knuckles joint is to allow movement between two bones in the fingers.
Knuckles joint allows for flexion, extension, and rotation of the fingers
It is a synovial joint, allowing for smooth movement
The joint is supported by ligaments and tendons
Common activities that involve the knuckles joint include gripping objects and typing on a keyboard
- Q7. How much the mm in 1 inches?
- Ans.
1 inch is equal to 25.4 millimeters.
1 inch = 25.4 mm
To convert inches to millimeters, multiply the number of inches by 25.4
For example, 2 inches is equal to 50.8 mm (2 x 25.4)
- Q8. How much the microns in 1 mm?
- Ans.
There are 1000 microns in 1 mm.
1 mm is equal to 1000 microns
Micron is a unit of length equal to one millionth of a meter
Used in various industries such as manufacturing, engineering, and science
Interview Preparation Tips
Rate of speech should be average during interview.
Top trending discussions
Interview questions from similar companies
I applied via Naukri.com and was interviewed in Feb 2024. There were 2 interview rounds.
(3 Questions)
- Q1. Past experience
- Q2. About Company Manufacturing
- Q3. About relevant jobs experience
(2 Questions)
- Q1. Relevant jobs details
- Q2. How to Handle in present company
Production Supervisor Interview Questions & Answers
Madras Engineering Industries
Anonymous
posted on 8 Jul 2023
Selected
I applied via Referral and was interviewed before Jul 2022. There were 4 interview rounds.
(1 Question)
- Q1. Related from past experience
(1 Question)
- Q1. Skill and knowledge related
(1 Question)
- Q1. Document clarify and salary confirm
Rajneesh Patel
Interview Questionnaire
1 Question
- Q1. Maiacnce production ka target
Interview Preparation Tips
Selected
I applied via Approached by Company and was interviewed in Nov 2023. There were 2 interview rounds.
(4 Questions)
- Q1. What is current ctc
- Ans.
The current CTC (Cost to Company) refers to the total salary package of an employee, including all benefits and allowances.
CTC includes the basic salary, allowances, bonuses, and other benefits.
It is important to consider the CTC when discussing salary expectations.
CTC can vary based on factors such as experience, qualifications, and industry standards.
Example: My current CTC is $60,000 per annum, including a basic sal...
- Q2. The Current Total Compensation you are earning, which includes salary, bonus, and other perks
- Q3. The current total compensation you are earning,which includes salary,bonus ,and other perks
- Q4. What is expected ctc
- Ans.
The expected CTC for the Production Supervisor position is negotiable based on experience and qualifications.
The expected CTC will depend on factors such as the candidate's level of experience, skills, and industry standards.
It is common for employers to provide a salary range or ask for the candidate's salary expectations.
Negotiation skills and research on market rates can help in determining a suitable CTC.
Example: T...
Interview Preparation Tips
- Ctc
- Production Planning
- Production Supervising
Selected
I applied via Company Website and was interviewed in Mar 2023. There were 3 interview rounds.
Work prosaic in group discussion
(4 Questions)
- Q1. My biodata and am native
- Q2. Already working by company field
- Q3. I am 2 years experience by Rane break lining Limited sethupatti
- Q4. I am work by production field finishing operator
Interview Preparation Tips
- AutoCAD
- SAP
All workers in guide my the production supervisor
Selected
I applied via Naukri.com and was interviewed in Dec 2022. There were 2 interview rounds.
(3 Questions)
- Q1. Self introduction tell about yourself
- Q2. What is meant by production
- Ans.
Production refers to the process of creating goods or services using resources and labor.
Production involves transforming raw materials into finished products
It requires planning, organizing, and controlling resources to meet production goals
Examples include manufacturing, agriculture, and service industries
Efficient production can lead to increased profits and customer satisfaction
- Q3. What is meant by 5s
- Ans.
5S is a methodology used to organize and maintain a clean and efficient workplace.
5S stands for Sort, Set in Order, Shine, Standardize, and Sustain.
Sort involves removing unnecessary items from the workplace.
Set in Order focuses on arranging necessary items in a logical and efficient manner.
Shine refers to cleaning and maintaining the workplace.
Standardize involves creating guidelines and procedures for maintaining the...
Interview Preparation Tips
(2 Questions)
- Q1. Tell me about your experience in …
- Q2. What experience do you have that would be relevant to this role?
Interview Preparation Tips
Apply even if you're not fully qualified.
Job search like it's your job.
I applied via Referral and was interviewed in May 2022. There were 3 interview rounds.
I was very easy to atten and the question is know about mrf tyers
(6 Questions)
- Q1. The consider the job to mrf tyer why should they join and tell about the work
- Q2. When i will join the company and tell about this mode
- Q3. How to join the company and tell about our work mode
- Q4. When i will join the company and how to join
- Q5. The final round and rhe joining leeter not send to me kindly please send the letter sir
- Q6. Dear sir how to make or join the supervisor mode the company
Interview Preparation Tips
- AutoCAD
- Communication Skills
- Computer Operating
- MS Office Word
Production Supervisor Interview Questions & Answers
MRF Tyres
Rahul Prabhudas Patanwadiya
posted on 4 Oct 2022
I applied via Company Website and was interviewed in Apr 2022. There were 4 interview rounds.
They Asks you about General Knowledge Questions, Some Of Problem Solving Questions and Decision Making Questions.
In A Group Discussion, You will get One Topic to Debate on it. Every person Interactions, their Answer, their suggestions also marked by the organization.
(3 Questions)
- Q1. Tell me About your self?
- Ans. First of all Start with Describe your self, tell about your past experience, about your hobbies, etc.
- Q2. Explain us How can you say you are fit for this role?
- Q3. Share Your Past Experience if you are experience person, If you're Applied foe the first time to particular role try to explain how you will fit for this role or give them some hobbies related to role, You...
Interview Preparation Tips
Aurangabad auto Engineering Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
- Production Engineer Interview Questions
- Production Manager Interview Questions
- Production Officer Interview Questions
- Executive Production Interview Questions
- Production Interview Questions
- Senior Production Engineer Interview Questions
- Production Chemist Interview Questions
- Production Operator Interview Questions
- Show more
Aurangabad auto Engineering Production Supervisor Interview Process
based on 1 interview
Interview experience
Production Supervisor Interview Questions from Similar Companies
Aurangabad auto Engineering Production Supervisor Reviews and Ratings
based on 3 reviews
Rating in categories
|
Quality Engineer
54
salaries
|  ₹1.8 L/yr - ₹4.3 L/yr |
|
Senior Engineer
11
salaries
| ₹4.4 L/yr - ₹5.3 L/yr |
|
Production Engineer
11
salaries
| ₹2.2 L/yr - ₹6.5 L/yr |
|
CNC Operator
9
salaries
| ₹1.8 L/yr - ₹2 L/yr |
|
QA Engineer
9
salaries
| ₹2.1 L/yr - ₹4.2 L/yr |
Tata Motors
Mahindra & Mahindra
Maruti Suzuki
Ashok Leyland
- Home >
- Interviews >
- Aurangabad auto Engineering Interview Questions >
- Aurangabad auto Engineering Production Supervisor Interview Questions
