Upload Button Icon Add office photos

Filter interviews by

Assystem Senior Engineering Consultant Interview Questions and Answers

Updated 25 Nov 2024

Assystem Senior Engineering Consultant Interview Experiences

1 interview found

Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Nov 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

Verbal & logical reasoning

Round 2 - Technical 

(3 Questions)

  • Q1. Questioning on project thesis
  • Q2. Assumptions in stress block parameters
  • Ans. 

    Assumptions in stress block parameters refer to the simplifications made in modeling the stress distribution in concrete beams.

    • Assumptions include assuming a rectangular stress block shape for simplicity

    • Assuming a linear stress distribution within the stress block

    • Neglecting the effects of shear in the stress block

    • Assuming a constant value for the compressive stress in the stress block

    • These assumptions help simplify the

  • Answered by AI
  • Q3. SFD and BMD for frames

Interview Preparation Tips

Interview preparation tips for other job seekers - As now the company is acquired by Assystem you can expect a change in behaviour from the interviewer.
Focus mostly on basics and if you are experienced focus will be on your tasks done.

Interview questions from similar companies

Interview Preparation Tips

Round: Resume Shortlist
Experience: CRITERIA:6.5+ CGPANO BACKLOGS
Tips: TRY TO WORK HARD IN THE EARLIER SEMESTERS TO BE ELIGIBLE FOR MOST OF THE COMPANIES.

Round: Test
Experience: 30 TECHNICAL QUESTIONS, PURELY BRANCH SPECIFIC, EASY AND BASIC CONCEPTS WERE ASKED.30 APTITUDE AND ENGLISH QUESTIONS, VERY EASY
Tips: PREPARE TECHNICAL PART WELLPRACTICE APTITUDE AND ENGLISH FROM www.indiabix.comVERY HELPFUL WEBSITE
Duration: 60 minutes
Total Questions: 60

Round: HR Interview
Experience: GENERAL QUESTIONS WERE ASKED:ABOUT MYSELFFAMILY BACKGROUNDSCHOOLING AND ACADEMIC ACHIEVEMENTSABOUT JOINING TCE
Tips: DON'T MANIPULATE THE TRUTH.ANSWER CLEARLY AND CONFIDENTLY.

Round: Technical Interview
Experience: TECHNICAL QUESTIONS RELATED TO ELECTIVE SUBJECTS WERE ASKED.ALSO DESIGN STEPS OF VARIOUS STRUCTURAL ELEMENTS WERE ASKED.
Tips: BE PREPARED. SAY "DON'T KNOW THE ANSWER" INSTEAD OF SPEAKING NONSENSE. ANSWER ONLY WHAT IS ASKED. EXTRA INFO GIVEN BY YOU CAN GET YOU IN UNWANTED TROUBLE!! :P

General Tips: BEST OF LUCK.
Skill Tips: MAIN FOCUS ON THE WAY YOU COMMUNICATE WITH THE INTERVIEWERS IN ENGLISH!!
Skills: COMMUNICATION SKILLS
College Name: NIT SURAT
Motivation: GOOD REPUTATION. IT WAS EXACTLY MATCHING TO THE JOB PROFILE I ASPIRED FOR.TATA GROUP IS A BIG BRAND IN INDIA AND CAN LEAD TO MANY FUTURE BENEFITS IF YOU SERVE THEM FOR CONSIDERABLE AMOUNT OF TIME.
Funny Moments: THEY ASKED ME: "ANY SUGGESTION FOR IMPROVING OUR SELECTION PROCEDURE?"I ANSWERED: "YOU SHOULD CHANGE IT. TEST SHOULD BE ONLINE RATHER THAN BEING OFFLINE i.e. PEN AND PAPER."THEY WERE IMPRESSED AND APPRECIATED IT. :P

Interview Questionnaire 

1 Question

  • Q1. What is PHP
  • Ans. 

    PHP is a server-side scripting language used for web development.

    • PHP stands for Hypertext Preprocessor.

    • It is an open-source language.

    • PHP code is executed on the server, generating HTML which is sent to the client.

    • It can be embedded into HTML code.

    • PHP is commonly used for creating dynamic web pages and web applications.

    • Popular websites like Facebook, Wikipedia, and WordPress are built using PHP.

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - I am interested in IT industry

Skills evaluated in this interview

I applied via Campus Placement and was interviewed before Feb 2021. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. About college projects
  • Q2. Technicals related to it
Round 2 - HR 

(4 Questions)

  • Q1. What is your family background?
  • Q2. Where do you see yourself in 5 years?
  • Q3. What are your strengths and weaknesses?
  • Q4. Tell me about yourself.

Interview Preparation Tips

Topics to prepare for TCS Design Engineer interview:
  • Design considerations
  • Tools
Interview preparation tips for other job seekers - Go through your resume. See the profile that you have applied for. Explain everything you have learnt related to that profile and keep examples for most of it . Do some research on the company as well but not necessary.

I applied via Naukri.com and was interviewed in Oct 2021. There was 1 interview round.

Interview Questionnaire 

1 Question

  • Q1. Technical questions

Interview Preparation Tips

Interview preparation tips for other job seekers - Good experience with team lead

I applied via Campus Placement and was interviewed before Jan 2021. There were 4 interview rounds.

Interview Questionnaire 

1 Question

  • Q1. Aptitude exam Technical exam Program

Interview Preparation Tips

Interview preparation tips for other job seekers - Aptitude
Technical mcq(c)
Technical &Hr interview

Design Engineer Interview Questions & Answers

HCLTech user image Suganthan Sadasivam

posted on 12 Aug 2024

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
2-4 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed before Aug 2023. There were 2 interview rounds.

Round 1 - Technical 

(2 Questions)

  • Q1. GD&T symbols and where are they used
  • Ans. 

    GD&T symbols are used in engineering drawings to specify geometric tolerances and control the quality of manufactured parts.

    • Used in engineering drawings to specify geometric tolerances

    • Help control the quality of manufactured parts

    • Common symbols include concentricity, perpendicularity, flatness, and position

  • Answered by AI
  • Q2. What is tolerance stackup
  • Ans. 

    Tolerance stackup is the accumulation of variations in dimensions and tolerances in a product design.

    • Tolerance stackup occurs when the accumulated variations in dimensions and tolerances of individual components in an assembly result in deviations from the intended design.

    • It is important to consider tolerance stackup to ensure that all components fit together properly and meet the required specifications.

    • Tolerance stac...

  • Answered by AI
Round 2 - Technical 

(2 Questions)

  • Q1. About the project
  • Q2. Sheet metal guidelines
  • Ans. 

    Sheet metal guidelines are rules and recommendations for designing and manufacturing sheet metal parts.

    • Design parts with minimum bends to reduce cost and complexity

    • Use standard sheet metal thicknesses to avoid custom tooling

    • Add flanges for strength and rigidity

    • Avoid sharp corners to prevent cracking during bending

    • Design parts with consistent bend radii for uniformity

  • Answered by AI

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Sep 2023. There were 3 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Double-check your resume for any spelling mistakes. The recruiter may consider spelling mistakes as careless behavior or poor communication skills.
View all tips
Round 2 - HR 

(1 Question)

  • Q1. Previous experience
Round 3 - Technical 

(1 Question)

  • Q1. Previous experience and project

Design Engineer Interview Questions & Answers

Wipro user image Rajitha Vankadara

posted on 26 Apr 2022

I applied via Naukri.com and was interviewed in Mar 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

Logical thinking

Interview Preparation Tips

Topics to prepare for Wipro Design Engineer interview:
  • Self introduction
  • Hobbies
  • Family background
  • Logical questions
  • General questions
  • Related job questions
  • About company
Interview preparation tips for other job seekers - The job is very important in life because to gain knowledge and live ourselves. To protect without depending on others.
Interview experience
1
Bad
Difficulty level
Hard
Process Duration
6-8 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Oct 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Design Test 

(2 Questions)

  • Q1. Prepare properly while interview
  • Q2. Cad test require for Engineer

Interview Preparation Tips

Interview preparation tips for other job seekers - Proper knowledge require on specific aggregate.
All the best

Assystem Interview FAQs

How many rounds are there in Assystem Senior Engineering Consultant interview?
Assystem interview process usually has 2 rounds. The most common rounds in the Assystem interview process are Technical and Aptitude Test.
What are the top questions asked in Assystem Senior Engineering Consultant interview?

Some of the top questions asked at the Assystem Senior Engineering Consultant interview -

  1. Assumptions in stress block paramet...read more
  2. SFD and BMD for fra...read more

Tell us how to improve this page.

Assystem Senior Engineering Consultant Interview Process

based on 1 interview

Interview experience

2
  
Poor
View more

Interview Questions from Similar Companies

TCS Interview Questions
3.7
 • 10.4k Interviews
Accenture Interview Questions
3.8
 • 8.1k Interviews
Infosys Interview Questions
3.6
 • 7.5k Interviews
Wipro Interview Questions
3.7
 • 5.6k Interviews
Cognizant Interview Questions
3.7
 • 5.6k Interviews
Capgemini Interview Questions
3.7
 • 4.8k Interviews
Tech Mahindra Interview Questions
3.5
 • 3.8k Interviews
HCLTech Interview Questions
3.5
 • 3.8k Interviews
IBM Interview Questions
4.0
 • 2.3k Interviews
Oracle Interview Questions
3.7
 • 847 Interviews
View all
Assystem Senior Engineering Consultant Salary
based on 27 salaries
₹7.4 L/yr - ₹16.7 L/yr
31% less than the average Senior Engineering Consultant Salary in India
View more details

Assystem Senior Engineering Consultant Reviews and Ratings

based on 13 reviews

3.3/5

Rating in categories

3.1

Skill development

2.7

Work-life balance

2.8

Salary

3.0

Job security

3.1

Company culture

2.5

Promotions

2.9

Work satisfaction

Explore 13 Reviews and Ratings
Design Engineer
82 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Design Engineer
52 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Structural Design Engineer
50 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Consultant Engineer
47 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
30 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare Assystem with

TCS

3.7
Compare

Infosys

3.6
Compare

Wipro

3.7
Compare

HCLTech

3.5
Compare
Did you find this page helpful?
Yes No
write
Share an Interview