Upload Button Icon Add office photos

Ashoka Buildcon

Compare button icon Compare button icon Compare

Filter interviews by

Ashoka Buildcon Electrical Site Engineer Interview Questions and Answers

Updated 3 Nov 2023

Ashoka Buildcon Electrical Site Engineer Interview Experiences

1 interview found

Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via AmbitionBox and was interviewed in Oct 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - One-on-one 

(2 Questions)

  • Q1. What is transformer types?
  • Ans. 

    Transformer types include step-up, step-down, isolation, autotransformer, and distribution transformers.

    • Step-up transformer increases voltage output

    • Step-down transformer decreases voltage output

    • Isolation transformer provides electrical isolation between primary and secondary windings

    • Autotransformer has a single winding with multiple taps for different voltage levels

    • Distribution transformer is used to supply power to re

  • Answered by AI
  • Q2. What is types of motor
  • Ans. 

    Types of motors include AC motors, DC motors, synchronous motors, and induction motors.

    • AC motors: Alternating current motors that are commonly used in household appliances and industrial applications.

    • DC motors: Direct current motors that are used in applications where speed control is important, such as in electric vehicles.

    • Synchronous motors: Motors that operate at a fixed speed and are often used in applications wher...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - 1 year experience railway electrification

Interview questions from similar companies

Interview Questionnaire 

6 Questions

  • Q1. How we can design busbar for increased fault level but same current rating?
  • Ans. 

    To design busbar for increased fault level but same current rating, increase the cross-sectional area of the busbar.

    • Increase the thickness of the busbar

    • Increase the width of the busbar

    • Use materials with higher conductivity

    • Use busbar supports with higher short-circuit strength

    • Consider the temperature rise of the busbar

    • Perform a fault level calculation to determine the required cross-sectional area

  • Answered by AI
  • Q2. Basics of 3 Phase motor starters, how they work?
  • Q3. What will be the bending radius for different HT cables?
  • Ans. 

    The bending radius for HT cables varies depending on the cable type and size.

    • The bending radius for XLPE cables is typically 12 times the cable diameter.

    • For PILC cables, the bending radius is usually 20 times the cable diameter.

    • The bending radius for EPR cables is generally 10 times the cable diameter.

    • It is important to follow the manufacturer's recommendations for bending radius to avoid damaging the cable.

    • Bending rad...

  • Answered by AI
  • Q4. What type of work you are doing?
  • Ans. 

    I am currently working as an Electrical Engineer in a power distribution company.

    • Designing electrical systems for power distribution

    • Analyzing power consumption data

    • Troubleshooting electrical issues

    • Collaborating with other engineers on projects

  • Answered by AI
  • Q5. What is your salary expectation?
  • Ans. 

    I am looking for a competitive salary that aligns with my experience and skills in the industry.

    • Research industry standards for Electrical Engineers in the specific location

    • Consider years of experience and level of expertise

    • Factor in benefits and opportunities for growth within the company

  • Answered by AI
  • Q6. What is your current designation
  • Ans. 

    I am currently working as a Senior Electrical Engineer at XYZ Company.

    • Senior Electrical Engineer at XYZ Company

    • Responsible for designing and implementing electrical systems

    • Leading a team of engineers in project execution

  • Answered by AI

Interview Preparation Tips

Round: Resume Shortlist
Experience: My 3years+ work experience in Electrical Control Panel Design & Estimation.

I applied via Company Website and was interviewed before Aug 2020. There were 3 interview rounds.

Interview Questionnaire 

2 Questions

  • Q1. They asked me about my before project, what is my responsibilities
  • Q2. Then I give the details of of my project, say about my role and responsibilities

Interview Preparation Tips

Interview preparation tips for other job seekers - Fearless give ur answers, give ur best and wear formal dress in interview time

Interview Questionnaire 

3 Questions

  • Q1. Lighting Levels for Indoor and outdoor, and calculation procedure
  • Ans. 

    Lighting levels for indoor and outdoor areas are determined based on the purpose of the space and the activities that take place.

    • Indoor lighting levels are typically measured in foot-candles or lux

    • Outdoor lighting levels are typically measured in lumens per square meter

    • Calculation procedures involve determining the required illuminance level for the space and selecting appropriate light fixtures and bulbs

    • Factors such a...

  • Answered by AI
  • Q2. Datasheet paramaters for equipment such and transformers and motors.
  • Q3. Cable glands and their application as per area
  • Ans. 

    Cable glands are used to secure and seal cables in various applications based on the area of installation.

    • Cable glands are used in hazardous areas to prevent the entry of flammable gases and liquids.

    • In outdoor applications, cable glands are used to protect cables from moisture and dust.

    • In industrial settings, cable glands are used to secure cables and prevent them from being pulled out.

    • Different types of cable glands a...

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic electronics and electrical questions

Round 2 - Group Discussion 

Topic is About GenC and GenX

I applied via Naukri.com and was interviewed in Mar 2021. There was 1 interview round.

Interview Questionnaire 

2 Questions

  • Q1. MEP Electrical Engineer with over 11 years experience.
  • Q2. If any requirment? Then will contact me

Interview Preparation Tips

Interview preparation tips for other job seekers - I have good knowledge of MEP Project.

I applied via Walk-in

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

30 questions in 30 minutes question from machine and power system

Round 3 - Technical 

(1 Question)

  • Q1. Questions from transformer and 3 phase synchronous machine and from internship

Interview Preparation Tips

Interview preparation tips for other job seekers - Read electrical machine and power system
Interview experience
5
Excellent
Difficulty level
Easy
Process Duration
4-6 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Jun 2023. There were 2 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. Positive things
Round 2 - Technical 

(4 Questions)

  • Q1. Still working here
  • Q2. I still working here
  • Q3. Yes thise want to question
  • Q4. Yes this want Question
Interview experience
4
Good
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
-

I applied via AmbitionBox and was interviewed in Dec 2023. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. What is a transformer
  • Ans. 

    A transformer is an electrical device that transfers electrical energy between two or more circuits through electromagnetic induction.

    • Transformers are used to increase or decrease the voltage of an alternating current (AC) signal.

    • They consist of two or more coils of wire, known as windings, that are wound around a core made of magnetic material.

    • The primary winding receives electrical energy from a power source, while t...

  • Answered by AI
  • Q2. What is a current
  • Ans. 

    Current is the flow of electric charge through a conductor.

    • Current is measured in amperes (A).

    • It is caused by the movement of electrons or ions.

    • Current can be either direct current (DC) or alternating current (AC).

    • DC flows in one direction, while AC periodically changes direction.

    • Examples of current include the flow of electricity in a circuit or the movement of ions in an electrolyte solution.

  • Answered by AI
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I appeared for an interview in Feb 2025.

Round 1 - Technical 

(3 Questions)

  • Q1. Electrical work
  • Q2. Bar bending machine
  • Q3. Electrical Panel
Round 2 - Technical 

(2 Questions)

  • Q1. Bar bending machine
  • Q2. DG

Ashoka Buildcon Interview FAQs

How many rounds are there in Ashoka Buildcon Electrical Site Engineer interview?
Ashoka Buildcon interview process usually has 2 rounds. The most common rounds in the Ashoka Buildcon interview process are Resume Shortlist and One-on-one Round.
What are the top questions asked in Ashoka Buildcon Electrical Site Engineer interview?

Some of the top questions asked at the Ashoka Buildcon Electrical Site Engineer interview -

  1. What is transformer typ...read more
  2. What is types of mo...read more

Tell us how to improve this page.

Ashoka Buildcon Electrical Site Engineer Interview Process

based on 3 interviews

Interview experience

4.3
  
Good
View more
Ashoka Buildcon Electrical Site Engineer Salary
based on 9 salaries
₹3 L/yr - ₹4.8 L/yr
7% less than the average Electrical Site Engineer Salary in India
View more details

Ashoka Buildcon Electrical Site Engineer Reviews and Ratings

based on 8 reviews

4.6/5

Rating in categories

3.3

Skill development

4.0

Work-life balance

3.8

Salary

3.0

Job security

3.2

Company culture

4.2

Promotions

3.2

Work satisfaction

Explore 8 Reviews and Ratings
Engineer
196 salaries
unlock blur

₹2.3 L/yr - ₹5.8 L/yr

Senior Engineer
147 salaries
unlock blur

₹3.5 L/yr - ₹10 L/yr

Store Keeper
78 salaries
unlock blur

₹1.8 L/yr - ₹4.2 L/yr

Site Engineer
76 salaries
unlock blur

₹1.8 L/yr - ₹5.5 L/yr

Civil Engineer
72 salaries
unlock blur

₹2.1 L/yr - ₹6 L/yr

Explore more salaries
Compare Ashoka Buildcon with

L&T Construction

4.0
Compare

Simplex Infrastructures

3.4
Compare

ITD Cementation India

4.3
Compare

AtkinsRealis

3.9
Compare
Did you find this page helpful?
Yes No
write
Share an Interview