Upload Button Icon Add office photos

ArcelorMittal

Compare button icon Compare button icon Compare

Filter interviews by

Clear (1)

ArcelorMittal Production Graduate Engineer Trainee Interview Questions and Answers

Updated 1 Apr 2024

ArcelorMittal Production Graduate Engineer Trainee Interview Experiences

1 interview found

Interview experience
3
Average
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Oct 2023. There was 1 interview round.

Round 1 - Technical 

(1 Question)

  • Q1. Diff b/w stress and pressure Udl uvl of cantilever beams diagram What is strength What is process
  • Ans. 

    Stress is internal resistance to deformation, while pressure is force applied over an area. Strength is the ability to withstand stress, and process refers to a series of actions or steps.

    • Stress is the internal resistance to deformation in a material, measured in force per unit area (e.g. N/m^2 or Pa).

    • Pressure is the force applied perpendicular to the surface of an object, measured in force per unit area (e.g. N/m^2 or...

  • Answered by AI

Interview questions from similar companies

Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Aug 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

General reasoning, English

Round 2 - Group Discussion 

Gave topic related to national importance and gave sufficient time to prepare

Round 3 - One-on-one 

(2 Questions)

  • Q1. Metallurgy technical questions from BTech
  • Q2. Validation from psychometric written round

Interview Preparation Tips

Interview preparation tips for other job seekers - Refine technical concepts well, be confident in GD. Prepare well for reasoning rounds.
Interview experience
3
Average
Difficulty level
Easy
Process Duration
Less than 2 weeks
Result
Not Selected

I applied via Campus Placement and was interviewed in Feb 2024. There was 1 interview round.

Round 1 - Technical 

(2 Questions)

  • Q1. Difference between pump and blower
  • Ans. 

    Pumps are used to move fluids, while blowers are used to move gases.

    • Pumps are used to increase the pressure of liquids, while blowers are used to increase the pressure of gases.

    • Pumps are typically used in applications such as water supply, irrigation, and sewage systems.

    • Blowers are commonly used in applications like ventilation systems, pneumatic conveying, and combustion processes.

  • Answered by AI
  • Q2. Difference between milling and lathe machine
  • Ans. 

    Milling machine is used to remove material from a workpiece by feeding the workpiece against a rotating cutter. Lathe machine is used to rotate the workpiece against a cutting tool to remove material.

    • Milling machine uses a rotating cutter to remove material, while lathe machine uses a cutting tool that moves across the workpiece.

    • Milling machine is typically used for cutting flat surfaces, slots, and grooves, while lath...

  • Answered by AI
Interview experience
2
Poor
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
No response

I applied via Campus Placement and was interviewed in Dec 2023. There were 2 interview rounds.

Round 1 - Aptitude Test 

It consists of three parts .. verbal, numerical and other ... Followed by an domain specific test.

Round 2 - Technical 

(5 Questions)

  • Q1. Tell about yourself
  • Q2. Questions related to project. ( Better to have a project done in steel plant or atleast visiting a steel plant and know what's happening there and different processes .... on other projects they were least...
  • Q3. Questions on SOM
  • Q4. For me no hr questions were asked
  • Q5. Questions related to manufacturing process

Interview Preparation Tips

Topics to prepare for ArcelorMittal Nippon Steel Production Graduate Engineer Trainee interview:
  • Strength of materials
  • Material Science
  • Manufacturing Process
Interview experience
2
Poor
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

Basic core questions

Round 2 - Technical 

(1 Question)

  • Q1. Techincal 1-1 with an onsite engineer
Round 3 - HR 

(1 Question)

  • Q1. Basic HR related question
Interview experience
4
Good
Difficulty level
-
Process Duration
-
Result
-
Round 1 - Aptitude Test 

It was easy and time based

Round 2 - One-on-one 

(2 Questions)

  • Q1. Intro was asked and then steel making process. Software’s u known and about my internship in PORT.
  • Q2. Asked about stress strain curve to explain. And interviewer was very friendly. Very easy to get into this company

Interview Preparation Tips

Interview preparation tips for other job seekers - Just be confident and read about company what it does and ur good to go.
Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
-

I applied via Campus Placement and was interviewed in Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - Aptitude Test 

IT was medium level. Questions related to production was also there.

Round 3 - Group Discussion 

They asked me to speak on the topic "Impact of AI on Manufacturing"

Round 4 - One-on-one 

(2 Questions)

  • Q1. This was the final round HR. Which took place after 1.5 month in December. Started with quick Intro and them why JSW and revolved around my resume.
  • Q2. WHY JSW? PAST EXPERIENCE, HOW ARE YOU A GOOD FIT.

Interview Preparation Tips

Interview preparation tips for other job seekers - GOOD BASICS AND RESUME IS YOUR BIBLE
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all Resume tips
Round 2 - HR 

(5 Questions)

  • Q1. Self Introduction
  • Q2. What Are you Doing Know
  • Q3. What's Your Role in The Company
  • Q4. How Many Months
  • Q5. What is Your strength? What is your Week ness? Your Short Time Gole . YourLong Time Gole.

Interview Preparation Tips

Topics to prepare for JSW Steel Production Graduate Engineer Trainee interview:
  • Production Engineering
Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Will be easy basic core questions and aptitude

Round 2 - Group Discussion 

People from all over india wl be there fighting like fish market in the online GD

Round 3 - One-on-one 

(3 Questions)

  • Q1. Axes inclined together can be coupled with
  • Q2. More thermodynamic questions
  • Q3. Mini project explanation
  • Ans. 

    Designed and implemented a smart irrigation system using IoT technology.

    • Researched different sensors and microcontrollers suitable for the project

    • Developed a mobile application to monitor and control the irrigation system remotely

    • Integrated weather forecasting API to optimize watering schedule

    • Conducted field tests to validate the system's efficiency

  • Answered by AI
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Dec 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitude test was easy and everything can be answered if you know the basics of mechanical engineering all questions were easy to moderate level.

Round 2 - Group Discussion 

Recent and trending topics were pick to discuss you must raise your voice to speak and two topics will be given and everyone will get chance to speak

Round 3 - One-on-one 

(2 Questions)

  • Q1. Explain about stress strain curve
  • Ans. 

    The stress-strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.

    • The curve typically consists of several distinct regions: elastic deformation, yield point, plastic deformation, and ultimate failure.

    • In the elastic region, the material deforms elastically and returns to its original shape when the stress is removed.

    • The yield point is where the material transi...

  • Answered by AI
  • Q2. What are gears and types of gears
  • Ans. 

    Gears are mechanical components used to transmit motion and power between rotating shafts. There are various types of gears including spur, helical, bevel, and worm gears.

    • Gears are toothed mechanical components that mesh together to transmit motion and power.

    • Spur gears have straight teeth and are the most common type of gear.

    • Helical gears have angled teeth for smoother and quieter operation.

    • Bevel gears have cone-shaped...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be prepared of your CV and basics of DME SOM and Thermodynamics and other mechanical engineering topics for answering questions if you are mentioning about programming language in resume please be prepared of that.
Contribute & help others!
anonymous
You can choose to be anonymous

ArcelorMittal Interview FAQs

How many rounds are there in ArcelorMittal Production Graduate Engineer Trainee interview?
ArcelorMittal interview process usually has 1 rounds. The most common rounds in the ArcelorMittal interview process are Technical.

Recently Viewed

INTERVIEWS

ArcelorMittal

No Interviews

LIST OF COMPANIES

Discover companies

Find best workplace

INTERVIEWS

ACC

No Interviews

INTERVIEWS

ArcelorMittal

No Interviews

INTERVIEWS

ArcelorMittal

No Interviews

INTERVIEWS

Maersk

No Interviews

INTERVIEWS

ArcelorMittal

No Interviews

INTERVIEWS

ArcelorMittal

No Interviews

INTERVIEWS

Maersk

No Interviews

INTERVIEWS

Maersk

No Interviews

Tell us how to improve this page.

ArcelorMittal Production Graduate Engineer Trainee Interview Process

based on 1 interview

Interview experience

3
  
Average
View more

Interview Questions from Similar Companies

Tata Steel Interview Questions
4.1
 • 855 Interviews
JSW Steel Interview Questions
3.9
 • 591 Interviews
Vedanta Limited Interview Questions
3.8
 • 46 Interviews
NMDC Limited Interview Questions
4.3
 • 36 Interviews
Vizag Steel Interview Questions
4.1
 • 28 Interviews
View all
Deputy Manager
119 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
111 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Manager
97 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Manager
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Assistant Field Engineer
45 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare ArcelorMittal with

Tata Steel

4.1
Compare

JSW Steel

3.9
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare
Did you find this page helpful?
Yes No
write
Share an Interview