Add office photos
Filter interviews by
Al Abbar Metal & Glass Interview Questions and Answers
Al Abbar Metal & Glass Interview Experiences
1 interview found
I applied via Walk-in and was interviewed before Mar 2019. There were 3 interview rounds.
Interview Questionnaire
2 Questions
- Q1. Questions regarding designation related
- Q2. Shared with them the experience of QA-QC
Interview Preparation Tips
Interview questions from similar companies
Production Graduate Engineer Trainee Interview Questions & Answers
JSW Steel
Anonymous
posted on 12 Dec 2024
Selected
I applied via Naukri.com and was interviewed in Nov 2024. There were 4 interview rounds.
(5 Questions)
- Q1. Tell me about your project.
- Ans.
I worked on a project to optimize production processes by implementing automation and improving efficiency.
Implemented automation systems to streamline production processes
Analyzed data to identify bottlenecks and inefficiencies
Collaborated with cross-functional teams to implement solutions
Improved production output by 20% within 6 months
- Q2. Self introduction.
- Q3. Stress strain R15 R15 diagram.
- Ans.
The stress-strain diagram for R15 material shows the relationship between stress and strain for that specific material.
The stress-strain diagram typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.
R15 material may exhibit different characteristics compared to other materials, so the specific diagram would show its unique behavior.
The diagram helps engineers understand...
- Q4. What do you mean by tolerance.
- Ans.
Tolerance refers to the allowable deviation from a specified dimension or value in engineering.
Tolerance is important in manufacturing to ensure that parts fit together properly.
It is typically specified as a range, such as +/- 0.1mm.
Tolerance can be applied to dimensions, angles, surface finishes, and other characteristics.
For example, a hole may have a tolerance of +/- 0.05mm to allow for variations in the drilling p
- Q5. Define portrait engine diesel engine and its capacity and compression ratio.
- Ans.
A portrait engine diesel engine is a type of internal combustion engine with a capacity typically ranging from 1.5L to 3.0L and a compression ratio of around 16:1.
Portrait engine diesel engines are commonly used in passenger cars and light-duty trucks.
They are known for their fuel efficiency and torque output.
Examples of portrait engine diesel engines include the Ford EcoBlue 2.0L and the Volkswagen TDI 1.6L.
The high c...
Basic questions, profit loss
Environment. Women empowerment smart work it is the topics of the GD.
Basic codes. Basic in changing coding like adding subtraction loops etc.
Engineering Leadership Trainee Interview Questions & Answers
Aditya Birla Group
Anonymous
posted on 14 Dec 2024
Selected
I applied via Campus Placement and was interviewed in Nov 2024. There were 3 interview rounds.
A two-hour session covering aptitude, logical reasoning, personality assessment, and core skills.
Six individuals participated in a 15-minute online group discussion.
(4 Questions)
- Q1. Tell me about yourself
- Ans.
I am a dedicated and motivated engineering professional with a passion for problem-solving and innovation.
Graduated with a degree in Mechanical Engineering
Completed internships at engineering firms, gaining hands-on experience
Led a team project to design and build a solar-powered car
Strong communication and leadership skills
- Q2. Asked technical questions based on my internships.
- Q3. Which part/branch of aditya birla are you interested in?
- Ans.
I am interested in the cement branch of Aditya Birla.
I have a strong interest in the construction industry and believe that the cement branch offers great opportunities for growth and innovation.
I am impressed by Aditya Birla's reputation in the cement sector and their commitment to sustainability.
I have relevant experience or education in materials science or civil engineering, which aligns well with the cement indust
- Q4. What are your hobbies?
- Ans.
My hobbies include hiking, photography, and playing the guitar.
Hiking: I enjoy exploring nature trails and challenging myself physically.
Photography: I love capturing moments and landscapes through my camera lens.
Playing the guitar: I find relaxation and creativity in strumming chords and learning new songs.
Interview Preparation Tips
Selected
I applied via Company Website and was interviewed in Nov 2024. There were 4 interview rounds.
(2 Questions)
- Q1. Mujhe kone company me service engineer ke liye join karna hai
- Q2. Kone is the best company
(2 Questions)
- Q1. Good company kone
- Q2. Good company kone
(2 Questions)
- Q1. Good company kone
- Q2. Good company kone
(2 Questions)
- Q1. Good company kone
- Q2. Good company kone
Interview Preparation Tips
Selected
I applied via Recruitment Consulltant and was interviewed in Oct 2024. There was 1 interview round.
(5 Questions)
- Q1. What is Parameter of micrometer
- Ans.
The parameter of a micrometer is the scale on the sleeve that is used to measure the distance between the anvil and the spindle.
The parameter is typically marked in millimeters or inches, depending on the unit of measurement of the micrometer.
It is used to read the measurement accurately by aligning it with the thimble scale on the micrometer.
The parameter can be adjusted to zero when the anvil and spindle are in conta...
- Q2. How Types of steel
- Ans.
There are various types of steel used in manufacturing, each with different properties and applications.
Carbon steel: most common type, contains varying amounts of carbon
Alloy steel: contains additional elements like manganese, nickel, or chromium for improved strength and durability
Stainless steel: contains chromium for corrosion resistance
Tool steel: used for making tools due to high hardness and wear resistance
- Q3. Tell me about your something
- Ans.
My experience working as a supply chain management assistant in a fast-paced environment.
Managed inventory levels to ensure timely delivery of products
Assisted in coordinating shipments and tracking orders
Collaborated with vendors to negotiate pricing and terms
Utilized ERP systems to input and analyze data
Implemented process improvements to increase efficiency
- Q4. What you learn the technical course of computer
- Ans.
I learned various technical skills in computer courses, including programming languages, database management, and networking.
Studied programming languages such as Java, C++, and Python
Learned about database management systems like MySQL and Oracle
Understood networking concepts such as TCP/IP, routing, and switching
- Q5. Howmany days your joining time
- Ans.
My joining time is 30 days.
My joining time is 30 days from the date of offer acceptance.
I will need to complete all necessary paperwork and clearances within this time frame.
This allows me to wrap up my current responsibilities and transition smoothly into the new role.
Assistant Manager II Interview Questions & Answers
ArcelorMittal Nippon Steel
Anonymous
posted on 6 Oct 2024
I applied via Company Website and was interviewed in Sep 2024. There were 2 interview rounds.
Gear box replacement work
(6 Questions)
- Q1. Barring checking and saving work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old barring slue remove and new barring slue replace and bolt nut tighteni...
- Ans.
Bolt nut open and old barring slue remove and new barring slue replace and bolt nut tightening sure and paper work cancelled and conveyor belt running ok
- Q2. Motor replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and dayal guage ...
- Ans.
Bolt nut open and old motor remove and new motor replace and bolt nut tightening sure and dayal guage eliminate process ok and paper work cancelled and conveyor belt running ok
- Q3. Gear box replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old gear box remove and new gear box replace and bolt nut tightening sure and day...
- Ans.
Bolt nut open and old gear box remove and new gear box replace and bolt nut tightening sure and dayal guage eliminate process ok and paper work cancelled and conveyor belt running ok
- Q4. Conveyor belt discharge chute replacement work and safety first and paper work and walked away clean and fresh and try out and bolt nut open and old discharge chute remove and new discharge chute replace a...
- Q5. Conveyor belt all pully checking and saving greasing work and safety first and paper work and walked away clean and fresh and all pully checking and saving greasing gun and all' pully greasing and paper wo...
- Q6. Conveyor belt roller replacement work and safety first and paper work and walked away clean and fresh and try out and fream number mark and cut roller remove and new roller replace and cut roller shifting ...
Interview Preparation Tips
Maintenance Electrician Interview Questions & Answers
Bharat Forge
Dayashankar Rajbhar
posted on 2 Dec 2024
(2 Questions)
- Q1. Mcb,acb,mpcb,contactor, relay
- Q2. Db distribution
(1 Question)
- Q1. What's my salary.how many hours duty.my work in Electrical department
Interview Preparation Tips
I applied via Company Website and was interviewed in Aug 2024. There were 2 interview rounds.
(2 Questions)
- Q1. What is MSA study
- Ans.
MSA study stands for Measurement System Analysis. It is a study to assess the capability and reliability of a measurement system.
MSA study evaluates the accuracy, precision, and stability of a measurement system.
It helps in identifying sources of variation in the measurement process.
Common methods used in MSA study include Gage R&R (Repeatability and Reproducibility) and Bias studies.
The goal of MSA study is to ensure ...
- Q2. Spc study and control chart
(3 Questions)
- Q1. What is 8D and describe your preventive action
- Ans.
8D is a problem-solving methodology used in quality management to identify, correct, and prevent recurring problems.
8D stands for Eight Disciplines and is a structured problem-solving process
It involves identifying the problem, forming a team, implementing temporary containment actions, identifying root causes, implementing permanent corrective actions, and preventing recurrence
Preventive actions in 8D focus on address...
- Q2. Aerospace FAI REPORT which STD follow
- Ans.
Aerospace First Article Inspection (FAI) reports typically follow AS9102 standard.
Aerospace FAI reports usually follow AS9102 standard
AS9102 standard outlines requirements for FAI documentation in aerospace industry
FAI reports must include characteristics, results, and documentation of verification
AS9102 standard helps ensure consistency and quality in aerospace manufacturing processes
- Q3. What is Cp and Cpk how to use , why to use
- Ans.
Cp and Cpk are process capability indices used to assess the ability of a process to produce within specification limits.
Cp measures how well the process can fit within the specification limits.
Cpk takes into account the process centering and measures how well the process can fit within the specification limits while also considering the process variation.
They are used to determine if a process is capable of producing ...
Interview Preparation Tips
Do you have any reference contact person and also working with colleague's to the Indo mim company.
First preference consider only for Recommendations person. Total efforts and knowledge are waste.
My humble request don't attend the interview process without recommendation.
Worst Experience I never seen like this politics and partiality.
Mr. Vasanth technical round selector is the one select people by seeing their faces not considered as talents.
CMO- Mechanical Engineer Interview Questions & Answers
Procter & Gamble
Sohan Lal
posted on 7 Nov 2024
Selected
I applied via Recruitment Consulltant and was interviewed in Oct 2024. There were 3 interview rounds.
(2 Questions)
- Q1. Basic about you?
- Q2. Discussion about you work and your responsibility on your site?
(2 Questions)
- Q1. Basic of you technical background ?
- Q2. Technical question for your work field ?
(2 Questions)
- Q1. Discuss about your salary?
- Q2. How many days to you will joining the work on site ?
Interview Preparation Tips
Rajnish Thakur
Selected
I applied via Campus Placement and was interviewed in Nov 2024. There was 1 interview round.
(2 Questions)
- Q1. What are the steps involved in the manufacturing process?
- Q2. What is 5s
Interview Preparation Tips
- Welding Inspection
- AITF
- SAP
Al Abbar Metal & Glass Interview FAQs
Tell us how to improve this page.
Interview Questions for Popular Designations
People are getting interviews through
Interview Questions from Similar Companies
Al Abbar Metal & Glass Reviews and Ratings
based on 3 reviews
Rating in categories
|
Senior Designer
3
salaries
|  ₹9.6 L/yr - ₹9.6 L/yr |
|
Senior Draughtsman
3
salaries
| ₹4.8 L/yr - ₹9.6 L/yr |
|
Facade Designer
3
salaries
| ₹9.6 L/yr - ₹9.6 L/yr |
Tata Steel
JSW Steel
Aditya Birla Group
ArcelorMittal Nippon Steel
Calculate your in-hand salary
- Home >
- Interviews >
- Al Abbar Metal & Glass Interview Questions
