Upload Button Icon Add office photos
Engaged Employer

i

This company page is being actively managed by JSW Steel Team. If you also belong to the team, you can get access from here

JSW Steel Verified Tick

Compare button icon Compare button icon Compare

Filter interviews by

JSW Steel Production Graduate Engineer Trainee Interview Questions, Process, and Tips

Updated 12 Dec 2024

Top JSW Steel Production Graduate Engineer Trainee Interview Questions and Answers

View all 6 questions

JSW Steel Production Graduate Engineer Trainee Interview Experiences

5 interviews found

Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Nov 2024. There were 4 interview rounds.

Round 1 - Technical 

(5 Questions)

  • Q1. Tell me about your project.
  • Ans. 

    I worked on a project to optimize production processes by implementing automation and improving efficiency.

    • Implemented automation systems to streamline production processes

    • Analyzed data to identify bottlenecks and inefficiencies

    • Collaborated with cross-functional teams to implement solutions

    • Improved production output by 20% within 6 months

  • Answered by AI
  • Q2. Self introduction.
  • Q3. Stress strain R15 R15 diagram.
  • Ans. 

    The stress-strain diagram for R15 material shows the relationship between stress and strain for that specific material.

    • The stress-strain diagram typically consists of a linear elastic region, a yield point, plastic deformation, and ultimate failure.

    • R15 material may exhibit different characteristics compared to other materials, so the specific diagram would show its unique behavior.

    • The diagram helps engineers understand...

  • Answered by AI
  • Q4. What do you mean by tolerance.
  • Ans. 

    Tolerance refers to the allowable deviation from a specified dimension or value in engineering.

    • Tolerance is important in manufacturing to ensure that parts fit together properly.

    • It is typically specified as a range, such as +/- 0.1mm.

    • Tolerance can be applied to dimensions, angles, surface finishes, and other characteristics.

    • For example, a hole may have a tolerance of +/- 0.05mm to allow for variations in the drilling p

  • Answered by AI
  • Q5. Define portrait engine diesel engine and its capacity and compression ratio.
  • Ans. 

    A portrait engine diesel engine is a type of internal combustion engine with a capacity typically ranging from 1.5L to 3.0L and a compression ratio of around 16:1.

    • Portrait engine diesel engines are commonly used in passenger cars and light-duty trucks.

    • They are known for their fuel efficiency and torque output.

    • Examples of portrait engine diesel engines include the Ford EcoBlue 2.0L and the Volkswagen TDI 1.6L.

    • The high c...

  • Answered by AI
Round 2 - Aptitude Test 

Basic questions, profit loss

Round 3 - Group Discussion 

Environment. Women empowerment smart work it is the topics of the GD.

Round 4 - Coding Test 

Basic codes. Basic in changing coding like adding subtraction loops etc.

Interview experience
2
Poor
Difficulty level
Moderate
Process Duration
More than 8 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Jul 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Will be easy basic core questions and aptitude

Round 2 - Group Discussion 

People from all over india wl be there fighting like fish market in the online GD

Round 3 - One-on-one 

(3 Questions)

  • Q1. Axes inclined together can be coupled with
  • Q2. More thermodynamic questions
  • Q3. Mini project explanation
  • Ans. 

    Designed and implemented a smart irrigation system using IoT technology.

    • Researched different sensors and microcontrollers suitable for the project

    • Developed a mobile application to monitor and control the irrigation system remotely

    • Integrated weather forecasting API to optimize watering schedule

    • Conducted field tests to validate the system's efficiency

  • Answered by AI

Production Graduate Engineer Trainee Interview Questions Asked at Other Companies

Q1. PRINCIPLE ON WHICH HEAT TRANSFER WORKS (ALL PHASES)
asked in Veolia
Q2. 1-what is your favorite topic 2-third law of thermodynamics 3- mo ... read more
asked in Wood Group
Q3. Which flow system is more effective: countercurrent flow or concu ... read more
Q4. METHODS TO FIND NUMBER OF PLATES IN DISTILLATION COLUMN
Q5. What are the details of the manufacturing process of internal com ... read more
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Naukri.com and was interviewed in Aug 2023. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - HR 

(5 Questions)

  • Q1. Self Introduction
  • Q2. What Are you Doing Know
  • Q3. What's Your Role in The Company
  • Q4. How Many Months
  • Q5. What is Your strength? What is your Week ness? Your Short Time Gole . YourLong Time Gole.

Interview Preparation Tips

Topics to prepare for JSW Steel Production Graduate Engineer Trainee interview:
  • Production Engineering
Interview experience
4
Good
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Campus Placement and was interviewed before Dec 2023. There were 3 interview rounds.

Round 1 - Aptitude Test 

Aptitude test was easy and everything can be answered if you know the basics of mechanical engineering all questions were easy to moderate level.

Round 2 - Group Discussion 

Recent and trending topics were pick to discuss you must raise your voice to speak and two topics will be given and everyone will get chance to speak

Round 3 - One-on-one 

(2 Questions)

  • Q1. Explain about stress strain curve
  • Ans. 

    The stress-strain curve shows the relationship between stress (force applied) and strain (resulting deformation) in a material.

    • The curve typically consists of several distinct regions: elastic deformation, yield point, plastic deformation, and ultimate failure.

    • In the elastic region, the material deforms elastically and returns to its original shape when the stress is removed.

    • The yield point is where the material transi...

  • Answered by AI
  • Q2. What are gears and types of gears
  • Ans. 

    Gears are mechanical components used to transmit motion and power between rotating shafts. There are various types of gears including spur, helical, bevel, and worm gears.

    • Gears are toothed mechanical components that mesh together to transmit motion and power.

    • Spur gears have straight teeth and are the most common type of gear.

    • Helical gears have angled teeth for smoother and quieter operation.

    • Bevel gears have cone-shaped...

  • Answered by AI

Interview Preparation Tips

Interview preparation tips for other job seekers - Please be prepared of your CV and basics of DME SOM and Thermodynamics and other mechanical engineering topics for answering questions if you are mentioning about programming language in resume please be prepared of that.

JSW Steel interview questions for designations

 Graduate Trainee

 (3)

 Graduate Engineer Trainee (Get)

 (34)

 Graduate Engineer

 (3)

 Engineer Trainee

 (3)

 Production Engineer

 (6)

 Diploma Trainee Engineer

 (11)

 Junior Engineer Trainee

 (3)

 Trainee Mechanical Engineer

 (1)

Interview experience
4
Good
Difficulty level
Easy
Process Duration
More than 8 weeks
Result
-

I applied via Campus Placement and was interviewed in Dec 2022. There were 4 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Aptitude Test 

IT was medium level. Questions related to production was also there.

Round 3 - Group Discussion 

They asked me to speak on the topic "Impact of AI on Manufacturing"

Round 4 - One-on-one 

(2 Questions)

  • Q1. This was the final round HR. Which took place after 1.5 month in December. Started with quick Intro and them why JSW and revolved around my resume.
  • Q2. WHY JSW? PAST EXPERIENCE, HOW ARE YOU A GOOD FIT.

Interview Preparation Tips

Interview preparation tips for other job seekers - GOOD BASICS AND RESUME IS YOUR BIBLE

Get interview-ready with Top JSW Steel Interview Questions

Interview questions from similar companies

I applied via Campus Placement and was interviewed before Jun 2021. There were 3 interview rounds.

Round 1 - Technical 

(1 Question)

  • Q1. 20 Technical questions Bomb calorie meter, compressor, thermal, power, maths etc
Round 2 - Group Discussion 

Always start first and be crisp and interactive and stick to the topic

Round 3 - Interview 

(1 Question)

  • Q1. Questions about Compressor specifically Screw compressor, Pumps , pipes bends and its losses, Safe working load, erosion, joints , seamless, Fluid mechanics,pipes,

Interview Preparation Tips

Topics to prepare for Vedanta Limited Production Engineer interview:
  • Fluid Mechanics
Interview preparation tips for other job seekers - Follow your path and trust yourself and your answers stick to the topic and be interective.
Interview experience
5
Excellent
Difficulty level
Hard
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Company Website and was interviewed in Nov 2022. There were 2 interview rounds.

Round 1 - Resume Shortlist 
Pro Tip by AmbitionBox:
Keep your resume crisp and to the point. A recruiter looks at your resume for an average of 6 seconds, make sure to leave the best impression.
View all tips
Round 2 - Technical 

(5 Questions)

  • Q1. Shaft daimeter 40 mm wy bearings no
  • Q2. Ferro silicon melting point wy
  • Q3. Which composition is a ci casting
  • Ans. 

    CI casting refers to cast iron casting, which is made from a composition of iron, carbon, and silicon.

    • CI casting stands for cast iron casting.

    • It is made from a composition of iron, carbon, and silicon.

    • The carbon content in CI casting is typically between 2.1% and 4%.

    • The silicon content in CI casting is typically between 1% and 3%.

    • CI casting is known for its excellent castability, good machinability, and high wear resis

  • Answered by AI
  • Q4. High crome metal pouring temperature
  • Ans. 

    The pouring temperature of high chrome metal is typically between 1,600 to 1,800 degrees Celsius.

    • High chrome metal is commonly used in applications that require high temperature resistance and corrosion resistance.

    • The pouring temperature is crucial to ensure proper flow and solidification of the metal.

    • The specific pouring temperature may vary depending on the exact composition of the high chrome metal and the desired p...

  • Answered by AI
  • Q5. Maild steel campotion

I applied via Naukri.com and was interviewed in Jul 2022. There was 1 interview round.

Round 1 - One-on-one 

(2 Questions)

  • Q1. Kazan in the deppt. And Regular work maximum out put
  • Q2. Hard working. Falxable processing

Interview Preparation Tips

Interview preparation tips for other job seekers - Maximum out put. And semple of working.
Interview experience
5
Excellent
Difficulty level
Moderate
Process Duration
Less than 2 weeks
Result
Selected Selected

I applied via Recruitment Consulltant and was interviewed in Sep 2024. There were 2 interview rounds.

Round 1 - HR 

(2 Questions)

  • Q1. What is stainless steel ?
  • Ans. 

    Stainless steel is a corrosion-resistant alloy made of iron, chromium, nickel, and other elements.

    • Stainless steel is known for its resistance to corrosion, rust, and staining.

    • It is commonly used in various industries such as construction, automotive, and food processing.

    • There are different grades of stainless steel, each with varying levels of corrosion resistance and strength.

    • Examples of stainless steel applications i...

  • Answered by AI
  • Q2. Why annealing we needed?
  • Ans. 

    Annealing is needed to relieve internal stresses, improve ductility, and soften the material for further processing.

    • Annealing helps to remove internal stresses in the material, making it more ductile and less prone to cracking.

    • It also helps to soften the material, making it easier to shape or machine.

    • Annealing can improve the microstructure of the material, leading to better mechanical properties.

    • Examples of materials ...

  • Answered by AI
Round 2 - Group Discussion 

Discussed on my jobs profile

Interview Preparation Tips

Topics to prepare for Jindal Stainless Production Engineer interview:
  • Steel making and production plan
Interview preparation tips for other job seekers - CRM production engineer

Skills evaluated in this interview

Interview experience
5
Excellent
Difficulty level
-
Process Duration
-
Result
-
Round 1 - HR 

(2 Questions)

  • Q1. Name and biodata
  • Ans. 

    My name is John Doe, a Production Engineer with 5 years of experience in manufacturing industry.

    • Name: John Doe

    • Experience: 5 years in manufacturing industry

    • Role: Production Engineer

  • Answered by AI
  • Q2. Technical and experience

JSW Steel Interview FAQs

How many rounds are there in JSW Steel Production Graduate Engineer Trainee interview?
JSW Steel interview process usually has 3-4 rounds. The most common rounds in the JSW Steel interview process are Aptitude Test, Group Discussion and One-on-one Round.
What are the top questions asked in JSW Steel Production Graduate Engineer Trainee interview?

Some of the top questions asked at the JSW Steel Production Graduate Engineer Trainee interview -

  1. Define portrait engine diesel engine and its capacity and compression rat...read more
  2. What are gears and types of ge...read more
  3. What do you mean by toleran...read more

Tell us how to improve this page.

JSW Steel Production Graduate Engineer Trainee Interview Process

based on 5 interviews

Interview experience

3.8
  
Good
View more
JSW Steel Production Graduate Engineer Trainee Salary
based on 11 salaries
₹5.5 L/yr - ₹8.8 L/yr
5% more than the average Production Graduate Engineer Trainee Salary in India
View more details

JSW Steel Production Graduate Engineer Trainee Reviews and Ratings

based on 5 reviews

2.8/5

Rating in categories

4.0

Skill development

3.2

Work-life balance

3.5

Salary

4.9

Job security

3.6

Company culture

3.4

Promotions

3.4

Work satisfaction

Explore 5 Reviews and Ratings
Assistant Manager
3.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Junior Engineer
2.2k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Deputy Manager
1.7k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Manager
1.1k salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Senior Engineer
991 salaries
unlock blur

₹0 L/yr - ₹0 L/yr

Explore more salaries
Compare JSW Steel with

Tata Steel

4.1
Compare

Steel Authority Of India

4.1
Compare

Vedanta Limited

3.8
Compare

ArcelorMittal Nippon Steel

4.1
Compare
Did you find this page helpful?
Yes No
write
Share an Interview